Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
[n] S.-H. Kim, “Simulation of Quench Dynamics in SRF Cavities under Pulsed Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB071, pp. 1365-1367.
[n] J. Angot et al., “Charge Breeding Time Studies With Short Pulse Beam Injection”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 24-28. doi:10.18429/JACoW-ECRIS2018-MOC3
[n] R. De Maria et al., “The High Luminosity Challenge: Potential and Limitations of High-Intensity High-Brightness Beams in the LHC and its Injectors”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOXLR01, pp. XX-XX.
[n] R. D. Ryne et al., “Recent Progress on the MaryLie/IMPACT Beam Dynamics Code”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUAPMP03, pp. 157-159.
[n] D. Yu and N. M. Kroll, “Damping of Higher-order Modes in a Threefold Symmetry Accelerating Structure”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1716-1719.
[n] J. P. Edelen, N. M. Cook, K. A. Brown, and P. S. Dyer, “Optimal Control for Rapid Switching of Beam Energies for the ATR Line at BNL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 790. doi:10.18429/JACoW-ICALEPCS2019-TUCPL07
[n] N. M. Kroll and K. Ko, “Mode Filter Designfor the NLC Overmoded RF Power Transport System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2010-2013.
[n] S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140
[n] J. Herranz et al., “The 20m/s CERN Fast Vacuum Wire Scanner Conceptual Design and Implementation”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 29-31. doi:10.18429/JACoW-MEDSI2016-MOPE13
[n] I. E. Campisi et al., “Status and Performance of the Spallation Neutron Source Superconducting Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS072, pp. 2502-2504.
[n] R. Niemczyk et al., “Comparison of YAG Screens and LYSO Screens at PITZ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 438-440. doi:10.18429/JACoW-IBIC2018-WEPB04
[n] H. Haseroth and P. T?¬tu, “Recent Operation and Modifications on the CPS-50 MeV Linac (Old Linac)”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB05, pp. 381-385.
[n] H. Niebuhr, A. Ates, M. Droba, O. Meusel, and U. Ratzinger, “Figure-8 Storage Ring - Ion Beam Injection into a Closed, Magnetic System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 680-682. doi:10.18429/JACoW-IPAC2017-MOPIK067
[n] A. N. Hannah et al., “Metal Photocathodes Preparation for Compact Linear Accelerator at Daresbury Laboratory”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3865-3868. doi:10.18429/JACoW-IPAC2018-THPAL095
[n] T. Ohkubo, M. Uesaka, and G. Zhidkov, “Numerical Study of Injection Mechanisms for Generation of Mono-Energetic Femtosecond Electron Bunch from the Plasma Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE003, pp. 859-861.
[n] H. Haseroth, M. Hone, and J. L. Vallet, “The Compensation for Beam Loading on the Preinjector of the New CERN 50-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-8, pp. 444-447.
[n] A. Grudiev et al., “Design of a Compact Superconducting Crab-Cavity for LHC Using Nb-on-Cu-Coating Technique”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB048, pp. 1205-1209.
[n] B. Bellesia, C. Santoni, and E. Todesco, “Random Errors in Superconducting Dipoles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS097, pp. 2601-2603.
[n] T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 14-19. doi:10.18429/JACoW-ECRIS2018-MOC1
[n] J. Skaritka et al., “Development of the SSC Trim Coil Beam Tube Assembly”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1437-1440.
[n] D. Briggs et al., “Prompt Bunch by Bunch Synchrotron Oscillation Detection Via a Fast Phase Measurement”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1404-1407.
[n] P. Jiang, Y. He, and Z. J. Wang, “Mathematical Principle and Numerical Reconstruction in Real Space Measurement with a Rotating BPM”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 560-562. doi:10.18429/JACoW-LINAC2018-TUPO106
[n] M. Mohseni Kejani, F. Abbasi, S. Ahmadiannamin, F. Ghasemi, and S. Zarei, “Thermal and Mechanical Analysis of 3 GHz Side Coupled RF Cavity for Medical Linacs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4660-4663. doi:10.18429/JACoW-IPAC2017-THPVA087
[n] G. Kasprowicz, J. M. Belleman, and U. Raich, “Digital Beam Trajectory and Orbit System, for the CERN Proton Synchrotron”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB09, pp. 75-77.
[n] Y. Shibata, J. Sugahara, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Diagnostics of Subpicosecond Electron Beam by Michelson Interferometer and Femtosecond Streak Camera”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP37C, pp. 1632-1634.
[n] S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
[n] J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3234-3237.
[n] S. A. Kahn et al., “Plasma Lens for Muon and Neutrino Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP073, pp. 718-720.
[n] R. Legg et al., “SRF Photoinjector R&D at University of Wisconsin”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG118, pp. 45-49.
[n] J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216.
[n] C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
For LaTeX
Use Complete Form
For BibTeX
References
- J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
- S.-H. Kim, “Simulation of Quench Dynamics in SRF Cavities under Pulsed Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB071, pp. 1365-1367.
- J. Angot et al., “Charge Breeding Time Studies With Short Pulse Beam Injection”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 24-28.
- R. De Maria et al., “The High Luminosity Challenge: Potential and Limitations of High-Intensity High-Brightness Beams in the LHC and its Injectors”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOXLR01, pp. XX-XX.
- R. D. Ryne et al., “Recent Progress on the MaryLie/IMPACT Beam Dynamics Code”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUAPMP03, pp. 157-159.
- D. Yu and N. M. Kroll, “Damping of Higher-order Modes in a Threefold Symmetry Accelerating Structure”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1716-1719.
- J. P. Edelen, N. M. Cook, K. A. Brown, and P. S. Dyer, “Optimal Control for Rapid Switching of Beam Energies for the ATR Line at BNL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 790.
- N. M. Kroll and K. Ko, “Mode Filter Designfor the NLC Overmoded RF Power Transport System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2010-2013.
- S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 413-416.
- J. Herranz et al., “The 20m/s CERN Fast Vacuum Wire Scanner Conceptual Design and Implementation”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 29-31.
- I. E. Campisi et al., “Status and Performance of the Spallation Neutron Source Superconducting Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS072, pp. 2502-2504.
- R. Niemczyk et al., “Comparison of YAG Screens and LYSO Screens at PITZ”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 438-440.
- H. Haseroth and P. T?¬tu, “Recent Operation and Modifications on the CPS-50 MeV Linac (Old Linac)”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB05, pp. 381-385.
- H. Niebuhr, A. Ates, M. Droba, O. Meusel, and U. Ratzinger, “Figure-8 Storage Ring - Ion Beam Injection into a Closed, Magnetic System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 680-682.
- A. N. Hannah et al., “Metal Photocathodes Preparation for Compact Linear Accelerator at Daresbury Laboratory”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3865-3868.
- T. Ohkubo, M. Uesaka, and G. Zhidkov, “Numerical Study of Injection Mechanisms for Generation of Mono-Energetic Femtosecond Electron Bunch from the Plasma Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE003, pp. 859-861.
- H. Haseroth, M. Hone, and J. L. Vallet, “The Compensation for Beam Loading on the Preinjector of the New CERN 50-MeV Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-8, pp. 444-447.
- A. Grudiev et al., “Design of a Compact Superconducting Crab-Cavity for LHC Using Nb-on-Cu-Coating Technique”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB048, pp. 1205-1209.
- B. Bellesia, C. Santoni, and E. Todesco, “Random Errors in Superconducting Dipoles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS097, pp. 2601-2603.
- T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 14-19.
- J. Skaritka et al., “Development of the SSC Trim Coil Beam Tube Assembly”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1437-1440.
- D. Briggs et al., “Prompt Bunch by Bunch Synchrotron Oscillation Detection Via a Fast Phase Measurement”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1404-1407.
- P. Jiang, Y. He, and Z. J. Wang, “Mathematical Principle and Numerical Reconstruction in Real Space Measurement with a Rotating BPM”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 560-562.
- M. Mohseni Kejani, F. Abbasi, S. Ahmadiannamin, F. Ghasemi, and S. Zarei, “Thermal and Mechanical Analysis of 3 GHz Side Coupled RF Cavity for Medical Linacs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4660-4663.
- G. Kasprowicz, J. M. Belleman, and U. Raich, “Digital Beam Trajectory and Orbit System, for the CERN Proton Synchrotron”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB09, pp. 75-77.
- Y. Shibata, J. Sugahara, T. Ueda, M. Uesaka, T. Watanabe, and K. Yoshii, “Diagnostics of Subpicosecond Electron Beam by Michelson Interferometer and Femtosecond Streak Camera”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP37C, pp. 1632-1634.
- S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
- J. Allinger et al., “Studies of Quench Propagation in a Superconducting Window Frame Magnet”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3234-3237.
- S. A. Kahn et al., “Plasma Lens for Muon and Neutrino Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP073, pp. 718-720.
- R. Legg et al., “SRF Photoinjector R&D at University of Wisconsin”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG118, pp. 45-49.
- J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216.
- C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
Back to search