Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. E. J??rgensen et al., “High-Energy Scraper System for the S-DALINAC Extraction Beam Line - Commissioning Run”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 75-77. doi:10.18429/JACoW-IBIC2018-MOPB03
[n] A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
[n] H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
[n] Jines P., Craft B., “The GNU Control System at CAMD: Part Two”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P37, pp. XX-XX.
[n] C. Zhang, M. Heilmann, H. Podlech, and C. Will, “Development of a 704.4 MHz CH cavity using additive manufacturing”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1744-1746. doi:10.18429/JACoW-IPAC2023-TUPA185
[n] C. Friedrichs, J. Lyles, and J. M. Doub, “Development of a High Speed Crowbar for LANSCE”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P011, pp. 3473-3475.
[n] D. Winder, “The path to high beam power targets”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEZN2, unpublished.
[n] M. Parise, J. Bernardini, and D. Passarelli, “Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 519-522. doi:10.18429/JACoW-LINAC2022-TUPOGE14
[n] T. Zhang, X. Guan, and B. Cui, “A New Project of Cyclotron Base Radioactive Ion Beam Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA201, pp. XX-XX.
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
[n] M. Pont, “Booster of the ALBA Synchrotron Light Source: Pre-commissioning experiences”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD069, pp. 3257-3259.
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 229-231. doi:10.18429/JACoW-NAPAC2016-MOPOB71
[n] C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
[n] L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
[n] J. D. Gilpatrick et al., “Operation of the Position Measurements for the Isotope Production Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT152, pp. 2813-2815.
[n] Z. J. Wang et al., “The Status of CiADS Superconducting LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 994-997. doi:10.18429/JACoW-IPAC2019-MOPTS059
[n] W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
[n] G. Corso and R. Pakter, “Improving Regular Acceleration in the Nonlinear Interaction of Particles and Waves”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP056G, pp. 1391-1393.
[n] A. Mak, F. Curbis, and S. Werin, “FEL Operation Modes of the MAX IV Short Pulse Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 241-245. doi:10.18429/JACoW-FEL2015-MOP083
[n] D. Gonnella, F. Furuta, G. M. Ge, and M. Liepe, “Nitrogen-Treated Cavity Testing at Cornell”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP016, pp. 866-868.
[n] E. V. Farinholt, Z. D. Farkas, and H. A. Hogg, “Microwave Beam Position Monitors at SLAC”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1127-1132.
[n] K. G. Panagiotidis and A. Wolski, “Alignment Sensitivities in the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN075, pp. 2877-2879.
[n] S. Holm and A. Johansson, “Invited Paper: The Uppsala Synchrocyclotron and Storage Ring Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O02, pp. 589-594.
[n] R. Junqueira Le?úo, H. Geraissate Paranhos de Oliveira, F. Rodrigues, G. R. Rovigatti de Oliveira, and U. R. Sposito, “Sirius Pre-alignment Results”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4106-4108. doi:10.18429/JACoW-IPAC2019-THPTS002
[n] A. Dhar et al., “Solid-state driven X-band linac for electron microscopy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3710-3713. doi:10.18429/JACoW-IPAC2024-THPR85
[n] A. F. Jacob, G. R. Lambertson, and F. Voelker, “On the Beam Impedance of Shallow Tapered Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 323-326.
[n] M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
[n] G. Liu, L. Wang, and K. Xuan, “Lattice Compensation of the Wiggler Effect in HLSII with Particle Swarm Optimization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3275-3277. doi:10.18429/JACoW-IPAC2016-THPMB023
[n] J. Pasternak et al., “The MICE Demonstration of Lonization Cooling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4023-4026. doi:10.18429/JACoW-IPAC2015-THPF129
[n] F. Poirier et al., “The Pulsing Chopper-Based System of the Arronax C70XP Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1948-1950. doi:10.18429/JACoW-IPAC2019-TUPTS008
[n] T. Norimine, K. Hiramoto, and M. Umezawa, “A Design of a Rotating Gantry with Easy Steering for Proton Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI094, pp. 2751-2753.
[n] W. B. Mori, J. M. Dawson, D. W. Forslund, C. Joshi, J. M. Kindel, and K. Lee, “Studies of the Plasma Droplet Accelerator Scheme”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3503-3506.
[n] K. Shibata and K. Kanazawa, “Loss Factor and Impedance of IR Beam Ducts for SuperKEKB and KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD042, pp. 2018-2020.
[n] Yu. D. Kliuchevskaia, T. V. Bondarenko, and S. M. Polozov, “Simulation of the Electron Beam Dynamics in the Biperiodical Structure”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP104, pp. 1096-1098.
[n] J. G. Hwang, E.-S. Kim, and T. Miyajima, “Investigation of the Effect of Space Charge in the compact-Energy Recovery Linac”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG2025, pp. 78-82.
For LaTeX
Use Complete Form
For BibTeX
References
- L. E. J??rgensen et al., “High-Energy Scraper System for the S-DALINAC Extraction Beam Line - Commissioning Run”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 75-77.
- A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
- H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
- Jines P., Craft B., “The GNU Control System at CAMD: Part Two”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P37, pp. XX-XX.
- C. Zhang, M. Heilmann, H. Podlech, and C. Will, “Development of a 704.4 MHz CH cavity using additive manufacturing”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA185, pp. 1744-1746.
- C. Friedrichs, J. Lyles, and J. M. Doub, “Development of a High Speed Crowbar for LANSCE”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P011, pp. 3473-3475.
- D. Winder, “The path to high beam power targets”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEZN2, unpublished.
- M. Parise, J. Bernardini, and D. Passarelli, “Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 519-522.
- T. Zhang, X. Guan, and B. Cui, “A New Project of Cyclotron Base Radioactive Ion Beam Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUA201, pp. XX-XX.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
- M. Pont, “Booster of the ALBA Synchrotron Light Source: Pre-commissioning experiences”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD069, pp. 3257-3259.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 229-231.
- C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
- L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
- J. D. Gilpatrick et al., “Operation of the Position Measurements for the Isotope Production Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT152, pp. 2813-2815.
- Z. J. Wang et al., “The Status of CiADS Superconducting LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 994-997.
- W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
- G. Corso and R. Pakter, “Improving Regular Acceleration in the Nonlinear Interaction of Particles and Waves”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP056G, pp. 1391-1393.
- A. Mak, F. Curbis, and S. Werin, “FEL Operation Modes of the MAX IV Short Pulse Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 241-245.
- D. Gonnella, F. Furuta, G. M. Ge, and M. Liepe, “Nitrogen-Treated Cavity Testing at Cornell”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP016, pp. 866-868.
- E. V. Farinholt, Z. D. Farkas, and H. A. Hogg, “Microwave Beam Position Monitors at SLAC”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1127-1132.
- K. G. Panagiotidis and A. Wolski, “Alignment Sensitivities in the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN075, pp. 2877-2879.
- S. Holm and A. Johansson, “Invited Paper: The Uppsala Synchrocyclotron and Storage Ring Project”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O02, pp. 589-594.
- R. Junqueira Le?úo, H. Geraissate Paranhos de Oliveira, F. Rodrigues, G. R. Rovigatti de Oliveira, and U. R. Sposito, “Sirius Pre-alignment Results”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4106-4108.
- A. Dhar et al., “Solid-state driven X-band linac for electron microscopy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR85, pp. 3710-3713.
- A. F. Jacob, G. R. Lambertson, and F. Voelker, “On the Beam Impedance of Shallow Tapered Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 323-326.
- M. Geitz et al., “A Hilbert Transform Spectrometer Using a High TC Josephson Junction for Bunch Length Measurements at the TESLA Test Facility Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA133, pp. 2178-2180.
- G. Liu, L. Wang, and K. Xuan, “Lattice Compensation of the Wiggler Effect in HLSII with Particle Swarm Optimization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3275-3277.
- J. Pasternak et al., “The MICE Demonstration of Lonization Cooling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4023-4026.
- F. Poirier et al., “The Pulsing Chopper-Based System of the Arronax C70XP Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1948-1950.
- T. Norimine, K. Hiramoto, and M. Umezawa, “A Design of a Rotating Gantry with Easy Steering for Proton Therapy”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI094, pp. 2751-2753.
- W. B. Mori, J. M. Dawson, D. W. Forslund, C. Joshi, J. M. Kindel, and K. Lee, “Studies of the Plasma Droplet Accelerator Scheme”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3503-3506.
- K. Shibata and K. Kanazawa, “Loss Factor and Impedance of IR Beam Ducts for SuperKEKB and KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD042, pp. 2018-2020.
- Yu. D. Kliuchevskaia, T. V. Bondarenko, and S. M. Polozov, “Simulation of the Electron Beam Dynamics in the Biperiodical Structure”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP104, pp. 1096-1098.
- J. G. Hwang, E.-S. Kim, and T. Miyajima, “Investigation of the Effect of Space Charge in the compact-Energy Recovery Linac”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG2025, pp. 78-82.
Back to search