Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 168-172. doi:10.18429/JACoW-MEDSI2018-WEOPMA04
[n] M. Ge et al., “Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 473-475. doi:10.18429/JACoW-LINAC2018-TUPO059
[n] A. Kruschinski, J. Feikes, A. Hoehl, R. Klein, and J. Puls, “Advancing the Steady State Microbunching Experiment at the MLS With an Enhanced Detection Scheme”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper TH1C4, unpublished.
[n] U. Trinks et al., “The TRITON - A Superconducting Cyclotron with Separated Orbits”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 574-577.
[n] J. P. MacArthur, Z. Huang, A. A. Lutman, A. Marinelli, and H.-D. Nuhn, “Energy Spread Constraints on Field Suppression in a Reverse Tapered Undulator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 597-601. doi:10.18429/JACoW-FEL2015-WEP004
[n] A. V. Smirnov et al., “GaN Class-F Power Amplifier for Klystron Replacement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 583-585. doi:10.18429/JACoW-IPAC2016-MOPMY037
[n] N. A. Moody, D. W. Feldman, K. Jensen, P. G. O, J. L. Shaw, and J. E. Yater, “Experimental Progress Toward Low Workfunction Controlled Porosity Dispenser Photocathodes”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH069, pp. 748-751.
[n] S. Ghosh, A. Gottberg, C. Babcock, L. Egoriti, and T. Junginger, “Towards mitigation of challenges in development of high power ISOL targets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3542-3544. doi:10.18429/JACoW-IPAC2024-THPR23
[n] T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
[n] H. Heinrichs et al., “Activities on RF-Superconductivity at Wuppertal”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-8, pp. XX-XX.
[n] T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 220-222. doi:10.18429/JACoW-SRF2017-MOPB070
[n] C. Pellegrini, “The Free-Electron Laser Collective Instability and the Development of X-ray FELs”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA001, pp. 295-299.
[n] G. Franchetti, I. Hofmann, V. V. Kapin, and S. Sorge, “High Intensity Nonlinear Dynamics in SIS100”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP023, pp. 3242-3244.
[n] K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
[n] N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
[n] T. Ding, X. He, and W. Wang, “Data fusion based on the symmetric dual-path laser uncertainty weighting method”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB016, unpublished.
[n] A. V. Smirnov et al., “Update on CW 8 kW 1.5 GHz Klystron Replacement”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 232-234. doi:10.18429/JACoW-NAPAC2016-MOPOB72
[n] E. Guetlich, P. Forck, B. Walasek-Hoehne, and W. Ensinger, “Quantitative Scintillation Screen Studies at GSI-LINAC and Related Model Calculations”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD57, pp. 179-181.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
[n] R. Homs-Puron et al., “Internet of Things (IoT): Wireless Diagnostics Solutions”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1975-1977. doi:10.18429/JACoW-ICALEPCS2017-THSH203
[n] C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2237-2239. doi:10.18429/JACoW-IPAC2019-WEXXPLS2
[n] P. M. McIntyre and A. Sattarov, “Flux-coupled Cyclotron Stack: Optimization for Maximum Beam Power and Minimum Losses”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCN6, pp. 2113-2115.
[n] P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 933-938.
[n] R. Maier, “The High-Energy Storage Ring (HESR)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCN2, pp. 2104-2106.
[n] S. Shchelkunov et al., “Accelerator test facility upgrades to enable further advancements in the science and technology of accelerators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB090, unpublished.
[n] P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
[n] S. I. Tzenov and R. C. Davidson, “Macroscopic Fluid Approach to the Coherent Beam-Beam Interaction”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH319, pp. 2078-2080.
[n] P. R. Hanley and N. Wells, “Production of Intense Proton Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 182-185.
[n] L. Shang, Y. Lu, F. Shang, and Y. Y. Wang, “The New Injection System of the HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA013, pp. 687-689.
[n] P. P. Goryl, A. Götz, V. Hardion, S. Hauf, W. Soroka, and K. S. White, “Towards the Zero Code Waste to Increase the Impact of Science”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 456-461. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO38
[n] J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
[n] A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 809-812.
[n] S. P. Kearney and D. Shu, “FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 179-183. doi:10.18429/JACoW-MEDSI2018-WEOAMA05
[n] K. Shinto et al., “Strongly Focused He+ Beam Source for Alpha Particle Measurement at ITER”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS096, pp. 1726-1728.
[n] C. S. Hwang, C. H. Chang, T. C. Fan, G. J. Hwang, F. U. Lin, and P. K. Tseng, “Results Analysis of Measurement of the Multipole Magnet with Hall Probe”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1244-1247.
[n] H. Maesaka et al., “Design and Performance of the Synchronization System and Beam Diagnostic Instruments for SACLA”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG4001, pp. 110-115.
[n] A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 168-172.
- M. Ge et al., “Latest Results of Salt Based Bipolar Electro-polishing R&D at Cornell”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 473-475.
- A. Kruschinski, J. Feikes, A. Hoehl, R. Klein, and J. Puls, “Advancing the Steady State Microbunching Experiment at the MLS With an Enhanced Detection Scheme”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper TH1C4, unpublished.
- U. Trinks et al., “The TRITON - A Superconducting Cyclotron with Separated Orbits”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 574-577.
- J. P. MacArthur, Z. Huang, A. A. Lutman, A. Marinelli, and H.-D. Nuhn, “Energy Spread Constraints on Field Suppression in a Reverse Tapered Undulator”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 597-601.
- A. V. Smirnov et al., “GaN Class-F Power Amplifier for Klystron Replacement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 583-585.
- N. A. Moody, D. W. Feldman, K. Jensen, P. G. O, J. L. Shaw, and J. E. Yater, “Experimental Progress Toward Low Workfunction Controlled Porosity Dispenser Photocathodes”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH069, pp. 748-751.
- S. Ghosh, A. Gottberg, C. Babcock, L. Egoriti, and T. Junginger, “Towards mitigation of challenges in development of high power ISOL targets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR23, pp. 3542-3544.
- T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
- H. Heinrichs et al., “Activities on RF-Superconductivity at Wuppertal”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-8, pp. XX-XX.
- T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 220-222.
- C. Pellegrini, “The Free-Electron Laser Collective Instability and the Development of X-ray FELs”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA001, pp. 295-299.
- G. Franchetti, I. Hofmann, V. V. Kapin, and S. Sorge, “High Intensity Nonlinear Dynamics in SIS100”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP023, pp. 3242-3244.
- K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
- N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
- T. Ding, X. He, and W. Wang, “Data fusion based on the symmetric dual-path laser uncertainty weighting method”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB016, this conference.
- A. V. Smirnov et al., “Update on CW 8 kW 1.5 GHz Klystron Replacement”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 232-234.
- E. Guetlich, P. Forck, B. Walasek-Hoehne, and W. Ensinger, “Quantitative Scintillation Screen Studies at GSI-LINAC and Related Model Calculations”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD57, pp. 179-181.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
- R. Homs-Puron et al., “Internet of Things (IoT): Wireless Diagnostics Solutions”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1975-1977.
- C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2237-2239.
- P. M. McIntyre and A. Sattarov, “Flux-coupled Cyclotron Stack: Optimization for Maximum Beam Power and Minimum Losses”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCN6, pp. 2113-2115.
- P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 933-938.
- R. Maier, “The High-Energy Storage Ring (HESR)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCN2, pp. 2104-2106.
- S. Shchelkunov et al., “Accelerator test facility upgrades to enable further advancements in the science and technology of accelerators”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB090, this conference.
- P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
- S. I. Tzenov and R. C. Davidson, “Macroscopic Fluid Approach to the Coherent Beam-Beam Interaction”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH319, pp. 2078-2080.
- P. R. Hanley and N. Wells, “Production of Intense Proton Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 182-185.
- L. Shang, Y. Lu, F. Shang, and Y. Y. Wang, “The New Injection System of the HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA013, pp. 687-689.
- P. P. Goryl, A. Götz, V. Hardion, S. Hauf, W. Soroka, and K. S. White, “Towards the Zero Code Waste to Increase the Impact of Science”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO38, pp. 456-461.
- J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
- A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 809-812.
- S. P. Kearney and D. Shu, “FE Model of a Nanopositioning Flexure Stage for Diagnosis of Trajectory Errors”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 179-183.
- K. Shinto et al., “Strongly Focused He+ Beam Source for Alpha Particle Measurement at ITER”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS096, pp. 1726-1728.
- C. S. Hwang, C. H. Chang, T. C. Fan, G. J. Hwang, F. U. Lin, and P. K. Tseng, “Results Analysis of Measurement of the Multipole Magnet with Hall Probe”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1244-1247.
- H. Maesaka et al., “Design and Performance of the Synchronization System and Beam Diagnostic Instruments for SACLA”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG4001, pp. 110-115.
- A. Masi, M. Lamberti, R. Losito, and M. Martino, “Reduction of Magnetic Interference on the Position Sensors of the LHC Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS039, pp. 1623-1625.
Back to search