Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Aghion, D. Giove, and G. Cuttone, “The Operator Interface in the Control System for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-08, pp. 432-435.
[n] G. Andonian, E. Hemsing, P. Musumeci, J. B. Rosenzweig, A. Y. Murokh, and D. Xiang, “Bunch Length Diagnostic with Sub-femtosecond Resolution for High Brightness Electron Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOBB02, pp. 1967-1969.
[n] E. Laface, R. Miyamoto, D. C. Plostinar, and C. R. Prior, “ESS End-to-End Simulations: a Comparison Between IMPACT and MADX”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP046, pp. 3841-3843.
[n] E. Laface and I. List, “Field Map Model for the ESS Linac Simulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 348-350. doi:10.18429/JACoW-IPAC2015-MOPJE031
[n] C. M. Bhat, “A New Method of Beam Stacking in Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC104, pp. 307-309.
[n] T. Mitsuhashi, “Beam Halo Observation by Coronagraph”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITMM03, pp. 7-11.
[n] K. Satou, D. Bodart, S. Levasseur, G. Schneider, J. W. Storey, and M. Sapinski, “A Novel Field Cage Design for the CPS IPM and Systematic Errors in Beam Size and Emittance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2193-2196. doi:10.18429/JACoW-IPAC2018-WEPAL019
[n] V. Shiltsev, “Beam Dynamics Issues in TESLA Damping Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP034G, pp. 1033-1035.
[n] R. Chehab, G. Bienvenu, and M. Taurigna, “Beam Emittance Determination using Optical Transition Radiation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1139-1142.
[n] C. Johnstone, D. V. Neuffer, H. L. Owen, and P. Snopok, “A CW FFAG for Proton Computed Tomography”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR053, pp. 4094-4096.
[n] U. Raich, “Instrumentation in Small Low Energy Machines”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITMM01, pp. XX-XX.
[n] N. A. Vinokurov et al., “Novosibirsk Four-Orbit ERL With Three FELs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4836-4841. doi:10.18429/JACoW-IPAC2017-FRXBB1
[n] J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
[n] M. Bai et al., “RHIC Spin Flipper Commissioning Results”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC057, pp. 1302-1304.
[n] B. Bogdanovitch, V. Senioukov, A. Koroliov, and K. Simonov, “Application of Low Energy Electron Beams for Technology and Medicine”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP142, pp. 2570-2572.
[n] J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Progress in Optics Studies at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1488-1491. doi:10.18429/JACoW-IPAC2015-TUPWA035
[n] A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITMM04, pp. XX-XX.
[n] I. Ben-Zvi et al., “R&D towards Cooling of the RHIC Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA005, pp. 39-41.
[n] S. S. Cao, Y. B. Leng, and R. X. Yuan, “X-Band Low Q Cavity Beam Position Monitor Study”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4777-4779. doi:10.18429/JACoW-IPAC2018-THPML061
[n] T. F. G. G??nzel and U. Iriso, “Revision of the Impedance Model for the Interpretation of the Single Bunch Measurements at ALBA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 330-333. doi:10.18429/JACoW-IPAC2015-MOPJE026
[n] E. Laface, “Non-linear Dynamics model for the ESS Linac Simulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 345-347. doi:10.18429/JACoW-IPAC2015-MOPJE030
[n] N. Bazin, G. Devanz, and F. Orsini, “Vacuum Study of the Cavity String for the IFMIF - LIPAc Cryomodule”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI003, pp. 3291-3293.
[n] E. Bravin, “High Resolution Transverse Profile Measurement”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOO1A02, pp. XX-XX.
[n] A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
[n] G. Decker, “Beam Stability in Synchrotron Light Sources”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITWM01, pp. 233-237.
[n] M. A. Kempkes, M. P. J. Gaudreau, I. Roth, and R. P. Torti, “A High Voltage Hard Switch Modulator for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN113, pp. 2301-2303.
[n] O. A. Shevchenko et al., “Commissioning Status and Further Development of the Novosibirsk Multiturn ERL”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PLT03, pp. 6-10.
[n] T. N. Khabiboulline et al., “High Gradient Tests of the Fermilab SSR1 Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC052, pp. 2330-2332.
[n] C. Cheng et al., “A New Method of Acquiring Fast Beam Transversal Profile in the Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME039, pp. 556-558.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Aghion, D. Giove, and G. Cuttone, “The Operator Interface in the Control System for the Milan Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-08, pp. 432-435.
- G. Andonian, E. Hemsing, P. Musumeci, J. B. Rosenzweig, A. Y. Murokh, and D. Xiang, “Bunch Length Diagnostic with Sub-femtosecond Resolution for High Brightness Electron Beams”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOBB02, pp. 1967-1969.
- E. Laface, R. Miyamoto, D. C. Plostinar, and C. R. Prior, “ESS End-to-End Simulations: a Comparison Between IMPACT and MADX”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP046, pp. 3841-3843.
- E. Laface and I. List, “Field Map Model for the ESS Linac Simulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 348-350.
- C. M. Bhat, “A New Method of Beam Stacking in Storage Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC104, pp. 307-309.
- T. Mitsuhashi, “Beam Halo Observation by Coronagraph”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM03, pp. 7-11.
- K. Satou, D. Bodart, S. Levasseur, G. Schneider, J. W. Storey, and M. Sapinski, “A Novel Field Cage Design for the CPS IPM and Systematic Errors in Beam Size and Emittance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2193-2196.
- V. Shiltsev, “Beam Dynamics Issues in TESLA Damping Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP034G, pp. 1033-1035.
- R. Chehab, G. Bienvenu, and M. Taurigna, “Beam Emittance Determination using Optical Transition Radiation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1139-1142.
- C. Johnstone, D. V. Neuffer, H. L. Owen, and P. Snopok, “A CW FFAG for Proton Computed Tomography”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR053, pp. 4094-4096.
- U. Raich, “Instrumentation in Small Low Energy Machines”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM01, pp. XX-XX.
- N. A. Vinokurov et al., “Novosibirsk Four-Orbit ERL With Three FELs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4836-4841.
- J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
- M. Bai et al., “RHIC Spin Flipper Commissioning Results”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC057, pp. 1302-1304.
- B. Bogdanovitch, V. Senioukov, A. Koroliov, and K. Simonov, “Application of Low Energy Electron Beams for Technology and Medicine”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP142, pp. 2570-2572.
- J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Progress in Optics Studies at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1488-1491.
- A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM04, pp. XX-XX.
- I. Ben-Zvi et al., “R&D towards Cooling of the RHIC Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MOPA005, pp. 39-41.
- S. S. Cao, Y. B. Leng, and R. X. Yuan, “X-Band Low Q Cavity Beam Position Monitor Study”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4777-4779.
- T. F. G. G??nzel and U. Iriso, “Revision of the Impedance Model for the Interpretation of the Single Bunch Measurements at ALBA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 330-333.
- E. Laface, “Non-linear Dynamics model for the ESS Linac Simulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 345-347.
- N. Bazin, G. Devanz, and F. Orsini, “Vacuum Study of the Cavity String for the IFMIF - LIPAc Cryomodule”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI003, pp. 3291-3293.
- E. Bravin, “High Resolution Transverse Profile Measurement”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOO1A02, pp. XX-XX.
- A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
- G. Decker, “Beam Stability in Synchrotron Light Sources”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITWM01, pp. 233-237.
- M. A. Kempkes, M. P. J. Gaudreau, I. Roth, and R. P. Torti, “A High Voltage Hard Switch Modulator for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN113, pp. 2301-2303.
- O. A. Shevchenko et al., “Commissioning Status and Further Development of the Novosibirsk Multiturn ERL”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper PLT03, pp. 6-10.
- T. N. Khabiboulline et al., “High Gradient Tests of the Fermilab SSR1 Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC052, pp. 2330-2332.
- C. Cheng et al., “A New Method of Acquiring Fast Beam Transversal Profile in the Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME039, pp. 556-558.
Back to search