Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Herlo, “Stepping Motor Control for Septum Plate Positioning”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP019, pp. 125-127.
[n] S. Papadopoulou, F. Antoniou, T. Argyropoulos, M. Hostettler, Y. Papaphilippou, and M. Fitterer, “Modelling and Measurements of Bunch Profiles at the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2167-2170. doi:10.18429/JACoW-IPAC2017-TUPVA044
[n] I. Koop, “Maintaining Polarization in Synchrotrons”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SAT3A3, pp. 193-195.
[n] F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and T. Lamy, “Commissioning of the ECRIS Charge State Breeder at TRIUMF”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper WECOBK01, pp. 178-180.
[n] V. M. Borin et al., “Measurements of Beam Parameters at the Last Track of the ERL-Based Novosibirsk Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2632-2634. doi:10.18429/JACoW-IPAC2019-WEPGW068
[n] H. Haseroth, “Survey on the Performance and Development of Existing Proton Linacs”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0001, pp. 3-8.
[n] A. D. Goncharov, Ya. G. Kruchkov, V. V. Parkhomchuk, V. B. Reva, D. N. Skorobogatov, and J. Dietrich, “Prototype of the High Voltage Section for the 2 MeV Electron Cooler at COSY”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP05, pp. XX-XX.
[n] C. Couillaud, G. Haouat, and A. Loulergue, “Electron Beam Transverse Emittance Measurement using Optical Transition Radiation Interferometry”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP013L, pp. 1594-1596.
[n] A. Oates et al., “Development of the Control System for ERLP”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_044.
[n] K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
[n] H. Guerin et al., “Simulation of machine-induced background to ALICE in the 2023 LHC ion run”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS138, unpublished.
[n] S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 665-668. doi:10.18429/JACoW-IBIC2016-WEPG19
[n] J. Norem, D. Huang, Z. Insepov, S. Mahalingam, and S. A. Veitzer, “Modeling RF Breakdown Arcs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP001, pp. 800-802.
[n] X. Huang, W. Fang, J. Tan, and C. Wang, “Design, fabrication and cold-test of an x-band accelerating structure for linearizer”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2083-2085. doi:10.18429/JACoW-IPAC2023-TUPL148
[n] F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 825-828. doi:10.18429/JACoW-IBIC2016-WEPG75
[n] J. R. Delayen, “Heavy-Ion Superconducting Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1451-1456.
[n] W. Barletta, “Design of the Vacuum System for the High Energy Ring of an Asymmetric B-factroy Based on PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2310-2313.
[n] A. Osanai and M. Tanigaki, “Development of Data-logging System for FFAG Accelerator Complex in KURRI”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP016, pp. 116-118.
[n] P. F. Ma et al., “Matrix Approach to Decouple Transverse-Coupled Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1144-1147. doi:10.18429/JACoW-IPAC2019-MOPTS112
[n] O. Etisken, F. Antoniou, Y. Papaphilippou, and A. K. Ciftci, “Pre-Booster Ring Considerations for the FCC e+e- Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 83-86. doi:10.18429/JACoW-IPAC2018-MOPMF002
[n] S. M. Ben Abdillah, S. Boussa, A. Gatera, and F. Pompon, “Bunch Measurements with BPM at Low Energy Hadron Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 237-239. doi:10.18429/JACoW-IPAC2022-MOPOPT005
[n] T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 52-57. doi:10.18429/JACoW-ERL2015-WEIALH2048
[n] J. E. Coleman et al., “Bunching and Focusing of an Intense Ion Beam for Target Heating Experiments”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS004, pp. 3516-3518.
[n] J.-S. Oh, I. S. Ko, T.-Y. Lee, and W. Namkung, “Wake Field Effect on the SASE Performance of PAL XFEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT017, pp. 1549-1551.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Herlo, “Stepping Motor Control for Septum Plate Positioning”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP019, pp. 125-127.
- S. Papadopoulou, F. Antoniou, T. Argyropoulos, M. Hostettler, Y. Papaphilippou, and M. Fitterer, “Modelling and Measurements of Bunch Profiles at the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2167-2170.
- I. Koop, “Maintaining Polarization in Synchrotrons”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SAT3A3, pp. 193-195.
- F. Ames, R. A. Baartman, P. G. Bricault, K. Jayamanna, and T. Lamy, “Commissioning of the ECRIS Charge State Breeder at TRIUMF”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper WECOBK01, pp. 178-180.
- V. M. Borin et al., “Measurements of Beam Parameters at the Last Track of the ERL-Based Novosibirsk Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2632-2634.
- H. Haseroth, “Survey on the Performance and Development of Existing Proton Linacs”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0001, pp. 3-8.
- A. D. Goncharov, Ya. G. Kruchkov, V. V. Parkhomchuk, V. B. Reva, D. N. Skorobogatov, and J. Dietrich, “Prototype of the High Voltage Section for the 2 MeV Electron Cooler at COSY”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP05, pp. XX-XX.
- C. Couillaud, G. Haouat, and A. Loulergue, “Electron Beam Transverse Emittance Measurement using Optical Transition Radiation Interferometry”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP013L, pp. 1594-1596.
- A. Oates et al., “Development of the Control System for ERLP”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_044.
- K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
- H. Guerin et al., “Simulation of machine-induced background to ALICE in the 2023 LHC ion run”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS138, this conference.
- S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 665-668.
- J. Norem, D. Huang, Z. Insepov, S. Mahalingam, and S. A. Veitzer, “Modeling RF Breakdown Arcs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP001, pp. 800-802.
- X. Huang, W. Fang, J. Tan, and C. Wang, “Design, fabrication and cold-test of an x-band accelerating structure for linearizer”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL148, pp. 2083-2085.
- F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 825-828.
- J. R. Delayen, “Heavy-Ion Superconducting Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1451-1456.
- W. Barletta, “Design of the Vacuum System for the High Energy Ring of an Asymmetric B-factroy Based on PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2310-2313.
- A. Osanai and M. Tanigaki, “Development of Data-logging System for FFAG Accelerator Complex in KURRI”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP016, pp. 116-118.
- P. F. Ma et al., “Matrix Approach to Decouple Transverse-Coupled Beams”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1144-1147.
- O. Etisken, F. Antoniou, Y. Papaphilippou, and A. K. Ciftci, “Pre-Booster Ring Considerations for the FCC e+e- Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 83-86.
- S. M. Ben Abdillah, S. Boussa, A. Gatera, and F. Pompon, “Bunch Measurements with BPM at Low Energy Hadron Accelerators”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 237-239.
- T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 52-57.
- J. E. Coleman et al., “Bunching and Focusing of an Intense Ion Beam for Target Heating Experiments”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS004, pp. 3516-3518.
- J.-S. Oh, I. S. Ko, T.-Y. Lee, and W. Namkung, “Wake Field Effect on the SASE Performance of PAL XFEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT017, pp. 1549-1551.
Back to search