Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Chow et al., “Fabrication and Test Results of a Nb3Sn Superconducting Racetrack Dipole Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBR2, pp. 171-173.
[n] G. Stern, H. Mainaud Durand, D. Piedigrossi, M. Sosin, A. Geiger, and S. Guillaume, “A Micrometric Positioning Sensor for Laser-Based Alignment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2700-2703. doi:10.18429/JACoW-IPAC2016-WEPOR017
[n] C. Quigg, “Particle Physics - Future Directions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOPL001, pp. 754-758.
[n] L. C. Richtmann, L. Bortot, E. Ravaioli, C. Wiesner, and D. Wollmann, “Beam-Based Reconstruction of the Shielded Quench-Heater Fields for the LHC Main Dipoles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1874-1877. doi:10.18429/JACoW-IPAC2022-WEPOPT016
[n] K. Crook, T. V. Huang, G. Nelson, and V. Price, “Operational Aspects of the SLAC Main Control Center”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 510-514.
[n] K. Blasche and B. Franzke, “Status Report on SIS-ESR”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 133-138.
[n] F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
[n] T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n] H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051.
[n] M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP67, pp. 625-625.
[n] B. W. Adams, “Femtosecond Synchronism of X-Rays to Visible Light in an XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA004, pp. XX-XX.
[n] Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
[n] R. K. Wang et al., “A Digital Power Supply Control Model in Heavy-ion Accelerator based on Dual Nios Cores”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO006, pp. 3346-3348.
[n] G. Parzen, “Tune Modulation Due to Gradient Ripple and the Dynamic Aperture”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 959-962.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Chow et al., “Fabrication and Test Results of a Nb3Sn Superconducting Racetrack Dipole Magnet”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBR2, pp. 171-173.
- G. Stern, H. Mainaud Durand, D. Piedigrossi, M. Sosin, A. Geiger, and S. Guillaume, “A Micrometric Positioning Sensor for Laser-Based Alignment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2700-2703.
- C. Quigg, “Particle Physics - Future Directions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOPL001, pp. 754-758.
- L. C. Richtmann, L. Bortot, E. Ravaioli, C. Wiesner, and D. Wollmann, “Beam-Based Reconstruction of the Shielded Quench-Heater Fields for the LHC Main Dipoles”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1874-1877.
- K. Crook, T. V. Huang, G. Nelson, and V. Price, “Operational Aspects of the SLAC Main Control Center”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 510-514.
- K. Blasche and B. Franzke, “Status Report on SIS-ESR”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 133-138.
- F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
- T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM122, pp. 2510-2513.
- H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2048-2051.
- M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Experience with the New Digital RF Control System at the CESR Storage Ring”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP67, pp. 625-625.
- B. W. Adams, “Femtosecond Synchronism of X-Rays to Visible Light in an XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA004, pp. XX-XX.
- Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
- R. K. Wang et al., “A Digital Power Supply Control Model in Heavy-ion Accelerator based on Dual Nios Cores”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO006, pp. 3346-3348.
- G. Parzen, “Tune Modulation Due to Gradient Ripple and the Dynamic Aperture”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 959-962.
Back to search