Favourites
For Word
[n] J. Dietrich et al., “Progress of the 2 MeV Electron Cooler Development for COSY-Jülich/HESR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS002, pp. 3427-3429.
[n] C. T. Rogers et al., “Alternative Muon Front-end for the International Design Study (IDS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE050, pp. 3455-3457.
[n] H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
[n] D. V. Neuffer, M. Martini, G. Prior, C. T. Rogers, and C. Y. Yoshikawa, “Muon Capture in the Front End of the IDS Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE068, pp. 3500-3502.
[n] C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654.
[n] I. Efthymiopoulos, S. S. Gilardoni, O. M. Hansen, and G. Prior, “A Simplified Magnetic Field Tapering and Target Optimisation for the Neutrino Factory Capture System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI018, pp. 1370-1372.
[n] P. Adams et al., “Numerical Simulations of RHIC FY17 Spin Flipper Experiments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2174-2176. doi:10.18429/JACoW-IPAC2019-TUPTS108
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 379-381. doi:10.18429/JACoW-IPAC2014-MOPME003
[n] L. Deniau et al., “The Magnetic Model of the LHC during Commissioning to Higher Beam Intensities in 2010-2011”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO031, pp. 2466-2468.
[n] L. Faillace, R. B. Agustsson, S. Boucher, A. Y. Murokh, and A. V. Smirnov, “Development of Carbon NanoTube (CNT) Cathodes at RadiaBeam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD081, pp. 1590-1592.
[n] L. J. Wang, J. Y. Tang, and K. Ohmi, “Beam-beam Studies for Super Proton-Proton Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2918-2920. doi:10.18429/JACoW-IPAC2018-THYGBD3
[n] H.-J. Tsai et al., “Hardware Improvements and Beam Commissioning of the Booster Ring in Taiwan Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1741-1743. doi:10.18429/JACoW-IPAC2015-TUPJE053
[n] E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1656-1658. doi:10.18429/JACoW-IPAC2014-TUPRI042
[n] A. C. Sauer et al., “Status of the Superconducting D+-CH-DTL Design for IFMIF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT029, pp. 1207-1209.
[n] A. Zolfaghari, P. T. Demos, J. B. Flanz, and K. Jacobs, “Comparison of SW and TW Non-Synchronous Accelerating Cavities as Used in Electron Beam Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 716-719.
[n] J. Romano, “The Ultra-Fast Injection Kicker for SXLS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 993-996.
[n] Y. Dutheil et al., “Energy Calibration and Tune Jumps Efficiency in the pp AGS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3095-3097. doi:10.18429/JACoW-IPAC2014-THPRO090
[n] L. B. Jones, D. P. Juarez-Lopez, B. L. Militsyn, T. C. Q. Noakes, L. A. J. Soomary, and C. P. Welsch, “Developments in Photocathode R&D at STFC Daresbury Laboratory: New Transverse Energy Spread Measurements and the Development of a Multi-Alkali Photocathode Preparation Facility”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 103-106. doi:10.18429/JACoW-ERL2019-WEPNEC17
[n] V. V. Parkhomchuk and S. Nagaitsev, “Development of Electron Coolers in Novosibirsk”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEXA02, pp. 2068-2072.
[n] Y. S. Wong, K.-B. Liu, and W. S. Wen, “External Energy Dump for Superconducting Magnet of the Uni-polar Power System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO015, pp. 3367-3369.
[n] L. Faillace, S. Boucher, and P. Musumeci, “Innovative Low-Energy Ultra-Fast Electron Diffraction (UED) System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC048, pp. 3395-3397.
[n] A. Loulergue et al., “LUNEX5: A French FEL Test Facility Light Source Proposal”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP005, pp. 1611-1613.
[n] A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Dietrich et al., “Progress of the 2 MeV Electron Cooler Development for COSY-Jülich/HESR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS002, pp. 3427-3429.
- C. T. Rogers et al., “Alternative Muon Front-end for the International Design Study (IDS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE050, pp. 3455-3457.
- H. Burkhardt, K. Cornelis, I. Reichel, H. Schmickler, and G. von Holtey, “Beam Tails in LEP”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP022L, pp. 1152-1154.
- D. V. Neuffer, M. Martini, G. Prior, C. T. Rogers, and C. Y. Yoshikawa, “Muon Capture in the Front End of the IDS Neutrino Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE068, pp. 3500-3502.
- C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654.
- I. Efthymiopoulos, S. S. Gilardoni, O. M. Hansen, and G. Prior, “A Simplified Magnetic Field Tapering and Target Optimisation for the Neutrino Factory Capture System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI018, pp. 1370-1372.
- P. Adams et al., “Numerical Simulations of RHIC FY17 Spin Flipper Experiments”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2174-2176.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 379-381.
- L. Deniau et al., “The Magnetic Model of the LHC during Commissioning to Higher Beam Intensities in 2010-2011”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO031, pp. 2466-2468.
- L. Faillace, R. B. Agustsson, S. Boucher, A. Y. Murokh, and A. V. Smirnov, “Development of Carbon NanoTube (CNT) Cathodes at RadiaBeam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD081, pp. 1590-1592.
- L. J. Wang, J. Y. Tang, and K. Ohmi, “Beam-beam Studies for Super Proton-Proton Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2918-2920.
- H.-J. Tsai et al., “Hardware Improvements and Beam Commissioning of the Booster Ring in Taiwan Photon Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1741-1743.
- E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1656-1658.
- A. C. Sauer et al., “Status of the Superconducting D+-CH-DTL Design for IFMIF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT029, pp. 1207-1209.
- A. Zolfaghari, P. T. Demos, J. B. Flanz, and K. Jacobs, “Comparison of SW and TW Non-Synchronous Accelerating Cavities as Used in Electron Beam Storage Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 716-719.
- J. Romano, “The Ultra-Fast Injection Kicker for SXLS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 993-996.
- Y. Dutheil et al., “Energy Calibration and Tune Jumps Efficiency in the pp AGS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3095-3097.
- L. B. Jones, D. P. Juarez-Lopez, B. L. Militsyn, T. C. Q. Noakes, L. A. J. Soomary, and C. P. Welsch, “Developments in Photocathode R&D at STFC Daresbury Laboratory: New Transverse Energy Spread Measurements and the Development of a Multi-Alkali Photocathode Preparation Facility”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 103-106.
- V. V. Parkhomchuk and S. Nagaitsev, “Development of Electron Coolers in Novosibirsk”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEXA02, pp. 2068-2072.
- Y. S. Wong, K.-B. Liu, and W. S. Wen, “External Energy Dump for Superconducting Magnet of the Uni-polar Power System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO015, pp. 3367-3369.
- L. Faillace, S. Boucher, and P. Musumeci, “Innovative Low-Energy Ultra-Fast Electron Diffraction (UED) System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC048, pp. 3395-3397.
- A. Loulergue et al., “LUNEX5: A French FEL Test Facility Light Source Proposal”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP005, pp. 1611-1613.
- A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
Back to search