Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Naito et al., “Advanced Copper Lining for Accelerator Components”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE20, pp. 1015-1017.
[n] V. Skalyga, A. Bokhanov, S. Golubev, I. Izotov, and S. S. Vybin, “A High Current Pure Proton Beam Source Prototype”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper THC02, unpublished.
[n] X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1852-1855. doi:10.18429/JACoW-IPAC2023-TUPL043
[n] R. L. Lapin et al., “Gasdynamic ECR Tandem Ion Source for Negative Hydrogen Ion Production”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 191-194. doi:10.18429/JACoW-ECRIS2018-THA5
[n] R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
[n] G. S. Mauro et al., “Numerical Simulation and Beam-Dynamics Study of a Hollow-Core Woodpile Coupler for Dielectric Laser Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2022-2025. doi:10.18429/JACoW-IPAC2021-TUPAB246
[n] A. Alexopoulos et al., “First LHC Transverse Beam Size Measurements With the Beam Gas Vertex Detector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1240-1243. doi:10.18429/JACoW-IPAC2017-TUOAB1
[n] S. Golubev et al., “Point-like Neutron Emission Observation Using a Neutron Generator Based on a Gasdynamic ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 185-187. doi:10.18429/JACoW-ECRIS2018-THA2
[n] S. Vlachos et al., “The LHC Beam Gas Vertex Detector - a Non-Invasive Profile Monitor for High Energy Machines”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 323-329. doi:10.18429/JACoW-IBIC2017-WE3AB1
[n] Yu. P. Bouzouloukov et al., “Beam Transport and Special Undulators Designed for High Power FELs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP106G, pp. 742-744.
[n] A. Vodopyanov, S. Golubev, I. Izotov, A. Mansfeld, and G. Yushkov, “He2+ Source Based on Penning Discharge with Additional 75 GHz ECR Heating”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT008, pp. 54-54.
[n] M. Mousavinia, H. Afarideh, and M. Ghergherehchi, “Design and Simulation of Cavity for 18 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 267-269. doi:10.18429/JACoW-Cyclotrons2016-WEB03
[n] J. Branlard et al., “Equipping FLASH with MTCA.4-based LLRF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP085, pp. 1126-1128.
[n] O. V. Chubar et al., “Novel Opportunities for Sub-meV Inelastic X-Ray Scattering Experiments at High-Repetition Rate Self-seeded XFELs”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 257-262. doi:10.18429/JACoW-FEL2015-MOP086
[n] D. P. May et al., “Status of the Texas A&M University Cyclotron Institute”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 281-284. doi:10.18429/JACoW-Cyclotrons2016-THA04
[n] M. R. Clausen, M. Moeller, S. Rettig-Labusga, and B. Schoeneburg, “What it Takes to Make a System Reliable”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD02, pp. 139-141.
[n] P. Ferracin et al., “Field Quality Analysis of a Second Generation IR Quadrupole for the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE021, pp. 1984-1986.
[n] N. V. Mokhov et al., “Energy Deposition Limits in a Nb3Sn Separation Dipole in Front of the LHC High-Luminosity Inner Triplet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB065, pp. 1748-1750.
[n] F. H. Raab, “High-Efficiency 500-W RF-Power Modules for UHF”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 174-176. doi:10.18429/JACoW-NAPAC2016-MOPOB51
[n] M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1335-1338.
[n] R. Corsini et al., “Fast Vertical Beam Instability in the CTF3 Combiner Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP011, pp. 574-576.
[n] M. Takanaka et al., “Control System of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 836-839.
[n] O. V. Chubar, A. S. Khlebnikov, N. V. Smolyakov, and S. V. Tolmachev, “A VUV-wiggler Scheme with Non-sinusoidal Magnetic Field Profile for High Energy Storage Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP109G, pp. 2558-2560.
[n] J. Payet et al., “Design of an Interaction Region with Head-on Collisions for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS060, pp. 682-684.
[n] P. Fernandes, R. Parodi, and G. Sabbi, “The Extension of the OSCAR2D Code to Compute Azimuthally Dependent Modes of Axially Symmetric Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 366-369.
[n] F. Bouly et al., “Developments and Tests of a 700 MHz Cryomodule for the Superconducting Linac of MYRRHA”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP057, pp. 250-254.
[n] T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415.
[n] A. D. McInturff, J.M. van Oort, and R. M. Scanlan, “Two Alternate High Gradient Quadrupoles; An Upgraded Tevatron IR and a "Pipe" Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ07, pp. 1402-1404.
[n] H. Fauska, J. S. Heagney, T. J. Morgan, and F. H. Schmidt, “Terminal Voltage Fluctuations of an FN Tandem Van De Graaff Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 166-169.
[n] T. Lamy et al., “60 GHz ECR Ion Sources”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2I01, pp. 277-281.
[n] S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
[n] F. H. Schmidt, “External Beam Focusing System”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F02, pp. 257-261.
[n] L. Emery et al., “The 1.2 GeV High Brightness Photon Source at the Stanford Photon Research Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1496-1499.
[n] N. J. Caling, H. Fauska, and F. H. Schmidt, “Suppression of Vertical Jitter" of the Beam from an Inclined Field Tube 3-Stage FN-Type Tandem Van de Graaff Accelerator"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 96-98.
[n] F. H. Schmidt, “Beam Quality for Nuclear Scattering and Reaction Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D09, pp. 216-219.
[n] G. Favre et al., “Manufacturing the Linac4 PI-mode Structure Prototype at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS100, pp. 1774-1776.
[n] D. Belohrad et al., “Upgrade of the Fast Beam Intensity Measurement System for the CERN PS Complex”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF03, pp. 525-529.
[n] G. P. Williams et al., “Calculations and Mitigation of THz Mirror Heating at the Jefferson Lab FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP058, pp. XX-XX.
[n] C. Cork, J. Fox, and R. Melen, “A Network Real Time Control System for the Stanford Photon Research Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 716-719.
[n] C. Compton et al., “Superconducting Resonator Production for Ion Linac at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO055, pp. 226-228.
[n] D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15.
[n] H. L. Phillips, K. Macha, and A-M. Valente-Feliciano, “Design and Commissioning Status of New Cylindrical HiPIMS Nb Coating System for SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP075, pp. 617-619.
[n] M. R. Clausen et al., “RF Heat Load Compensation for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 348-351. doi:10.18429/JACoW-ICALEPCS2017-TUMPA06
[n] F. Briquez et al., “Construction of Short Period APPLE II Type Undulators at SOLEIL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH015, pp. 265-268.
[n] J. P. Shanks, J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Characterization of Single Particle Dynamics for the International Linear Collider Damping Ring Lattice”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR066, pp. 1972-1974.
[n] E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
[n] S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034.
[n] M. Lindroos et al., “Upgrade Strategies for High Power Proton Linacs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS064, pp. 2646-2648.
[n] Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1007-1009. doi:10.18429/JACoW-IPAC2016-TUOAA02
[n] A. Ghigo et al., “Status of the CTF3 Frequency Multiplication Rings”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA075, pp. 217-219.
[n] N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 348-351.
[n] J. Deng et al., “R&D for Linear Induction Accelerator in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2RAI01, pp. 4259-4263.
[n] M. Doubek et al., “Simultaneous On-line Ultrasonic Flowmetery and Binary Gas Mixture Analysis for the ATLAS Silicon Tracker Cooling Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC038, pp. 642-645.
[n] X. J. Shu, Y. H. Dou, M. Li, Z. Xu, Y. Xu, and X. Yang, “Optimization on the Optical Resonator of CTFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3228-3230. doi:10.18429/JACoW-IPAC2018-THPAK010
[n] W. Bai, M. Li, L. J. Shan, X. M. Shen, and Z. Xu, “Latest Developments of a C-band 2MeV Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2165-2167. doi:10.18429/JACoW-IPAC2014-WEPRO089
[n] G. Sabbi et al., “Superconducting Focusing Quadrupoles for Heavy Ion Fusion Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE023, pp. 1990-1992.
[n] D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
[n] B. Diviacco et al., “Design, Construction and Field Characterization of a Variable Polarization Undulator for SOLEIL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT090, pp. 4242-4244.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Naito et al., “Advanced Copper Lining for Accelerator Components”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE20, pp. 1015-1017.
- V. Skalyga, A. Bokhanov, S. Golubev, I. Izotov, and S. S. Vybin, “A High Current Pure Proton Beam Source Prototype”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper THC02, unpublished.
- X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL043, pp. 1852-1855.
- R. L. Lapin et al., “Gasdynamic ECR Tandem Ion Source for Negative Hydrogen Ion Production”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 191-194.
- R. Corsini et al., “Experimental Studies on Drive Beam Generation in CTF3”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP010, pp. 571-573.
- G. S. Mauro et al., “Numerical Simulation and Beam-Dynamics Study of a Hollow-Core Woodpile Coupler for Dielectric Laser Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2022-2025.
- A. Alexopoulos et al., “First LHC Transverse Beam Size Measurements With the Beam Gas Vertex Detector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1240-1243.
- S. Golubev et al., “Point-like Neutron Emission Observation Using a Neutron Generator Based on a Gasdynamic ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 185-187.
- S. Vlachos et al., “The LHC Beam Gas Vertex Detector - a Non-Invasive Profile Monitor for High Energy Machines”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 323-329.
- Yu. P. Bouzouloukov et al., “Beam Transport and Special Undulators Designed for High Power FELs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP106G, pp. 742-744.
- A. Vodopyanov, S. Golubev, I. Izotov, A. Mansfeld, and G. Yushkov, “He2+ Source Based on Penning Discharge with Additional 75 GHz ECR Heating”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT008, pp. 54-54.
- M. Mousavinia, H. Afarideh, and M. Ghergherehchi, “Design and Simulation of Cavity for 18 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 267-269.
- J. Branlard et al., “Equipping FLASH with MTCA.4-based LLRF System”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP085, pp. 1126-1128.
- O. V. Chubar et al., “Novel Opportunities for Sub-meV Inelastic X-Ray Scattering Experiments at High-Repetition Rate Self-seeded XFELs”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 257-262.
- D. P. May et al., “Status of the Texas A&M University Cyclotron Institute”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 281-284.
- M. R. Clausen, M. Moeller, S. Rettig-Labusga, and B. Schoeneburg, “What it Takes to Make a System Reliable”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD02, pp. 139-141.
- P. Ferracin et al., “Field Quality Analysis of a Second Generation IR Quadrupole for the LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE021, pp. 1984-1986.
- N. V. Mokhov et al., “Energy Deposition Limits in a Nb3Sn Separation Dipole in Front of the LHC High-Luminosity Inner Triplet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB065, pp. 1748-1750.
- F. H. Raab, “High-Efficiency 500-W RF-Power Modules for UHF”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 174-176.
- M. Ohno et al., “Performance of the Vacuum System for SORTEC 1 GeV Electron Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1335-1338.
- R. Corsini et al., “Fast Vertical Beam Instability in the CTF3 Combiner Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP011, pp. 574-576.
- M. Takanaka et al., “Control System of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 836-839.
- O. V. Chubar, A. S. Khlebnikov, N. V. Smolyakov, and S. V. Tolmachev, “A VUV-wiggler Scheme with Non-sinusoidal Magnetic Field Profile for High Energy Storage Rings”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP109G, pp. 2558-2560.
- J. Payet et al., “Design of an Interaction Region with Head-on Collisions for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS060, pp. 682-684.
- P. Fernandes, R. Parodi, and G. Sabbi, “The Extension of the OSCAR2D Code to Compute Azimuthally Dependent Modes of Axially Symmetric Cavities”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 366-369.
- F. Bouly et al., “Developments and Tests of a 700 MHz Cryomodule for the Superconducting Linac of MYRRHA”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP057, pp. 250-254.
- T. A. Puntambekar et al., “Experience of Beam Diagnostic Systems in Commissioning Stage of Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA065, pp. 413-415.
- A. D. McInturff, J.M. van Oort, and R. M. Scanlan, “Two Alternate High Gradient Quadrupoles; An Upgraded Tevatron IR and a "Pipe" Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ07, pp. 1402-1404.
- H. Fauska, J. S. Heagney, T. J. Morgan, and F. H. Schmidt, “Terminal Voltage Fluctuations of an FN Tandem Van De Graaff Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 166-169.
- T. Lamy et al., “60 GHz ECR Ion Sources”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2I01, pp. 277-281.
- S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
- F. H. Schmidt, “External Beam Focusing System”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F02, pp. 257-261.
- L. Emery et al., “The 1.2 GeV High Brightness Photon Source at the Stanford Photon Research Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1496-1499.
- N. J. Caling, H. Fauska, and F. H. Schmidt, “Suppression of Vertical Jitter" of the Beam from an Inclined Field Tube 3-Stage FN-Type Tandem Van de Graaff Accelerator"”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 96-98.
- F. H. Schmidt, “Beam Quality for Nuclear Scattering and Reaction Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D09, pp. 216-219.
- G. Favre et al., “Manufacturing the Linac4 PI-mode Structure Prototype at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS100, pp. 1774-1776.
- D. Belohrad et al., “Upgrade of the Fast Beam Intensity Measurement System for the CERN PS Complex”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF03, pp. 525-529.
- G. P. Williams et al., “Calculations and Mitigation of THz Mirror Heating at the Jefferson Lab FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP058, pp. XX-XX.
- C. Cork, J. Fox, and R. Melen, “A Network Real Time Control System for the Stanford Photon Research Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 716-719.
- C. Compton et al., “Superconducting Resonator Production for Ion Linac at Michigan State University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO055, pp. 226-228.
- D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15.
- H. L. Phillips, K. Macha, and A-M. Valente-Feliciano, “Design and Commissioning Status of New Cylindrical HiPIMS Nb Coating System for SRF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP075, pp. 617-619.
- M. R. Clausen et al., “RF Heat Load Compensation for the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 348-351.
- F. Briquez et al., “Construction of Short Period APPLE II Type Undulators at SOLEIL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH015, pp. 265-268.
- J. P. Shanks, J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Characterization of Single Particle Dynamics for the International Linear Collider Damping Ring Lattice”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR066, pp. 1972-1974.
- E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
- S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034.
- M. Lindroos et al., “Upgrade Strategies for High Power Proton Linacs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS064, pp. 2646-2648.
- Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1007-1009.
- A. Ghigo et al., “Status of the CTF3 Frequency Multiplication Rings”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA075, pp. 217-219.
- N. Awaji, T. Iida, Y. Kijima, T. Kishimoto, M. Kodaira, and H. Tsuchidate, “High Current Beam Storage Experiments in SORTEC CR Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 348-351.
- J. Deng et al., “R&D for Linear Induction Accelerator in China”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2RAI01, pp. 4259-4263.
- M. Doubek et al., “Simultaneous On-line Ultrasonic Flowmetery and Binary Gas Mixture Analysis for the ATLAS Silicon Tracker Cooling Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC038, pp. 642-645.
- X. J. Shu, Y. H. Dou, M. Li, Z. Xu, Y. Xu, and X. Yang, “Optimization on the Optical Resonator of CTFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3228-3230.
- W. Bai, M. Li, L. J. Shan, X. M. Shen, and Z. Xu, “Latest Developments of a C-band 2MeV Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2165-2167.
- G. Sabbi et al., “Superconducting Focusing Quadrupoles for Heavy Ion Fusion Experiments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE023, pp. 1990-1992.
- D. Alesini, C. Biscari, A. Ghigo, and F. Marcellini, “Analysis of the Vertical Beam Instability in CTF3 Combiner Ring and New RF Deflector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP125, pp. 2791-2793.
- B. Diviacco et al., “Design, Construction and Field Characterization of a Variable Polarization Undulator for SOLEIL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT090, pp. 4242-4244.
Back to search