Favourites
For Word
[n] E. D. Bush et al., “LAMPF Transition-Region Mechanical Fabrication”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3083-3086.
[n] A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1734-1735. doi:10.18429/JACoW-ICALEPCS2017-THPHA148
[n] A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134.
[n] S. Fu et al., “Status of the China Spallation Neutron Source Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH1GRI02, pp. 3053-3057.
[n] M. A. Oothoudt, C. Pillai, and M. V. Zumbro, “Automatic Beam Position Control at LASREF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P044, pp. 2064-2066.
[n] D. Teytelman et al., “Measurements of Transverse Coupled-bunch Instabilities in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT160, pp. 2834-2836.
[n] C. Bloomer, G. Rehm, and A. Tipper, “Fast Feedback Using Electron Beam Steering to Maintain the X-Ray Beam Position at a Monochromatic X-Ray Diagnostic at Diamond Light Source”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 172-176. doi:10.18429/JACoW-IBIC2019-MOPP032
[n] C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
[n] T. Reid, Z. A. Conway, S. M. Gerbick, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “Electropolishing for Low-Beta and Quasi-Waveguide SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3273-3275. doi:10.18429/JACoW-IPAC2015-WEPTY010
[n] J. W. Wang et al., “Wakefield Measuremetns of SLAC Linac Structures at the Argonne AATF”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3219-3222.
[n] B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
[n] C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 67-70. doi:10.18429/JACoW-ECRIS2018-TUB3
[n] C. E. Houghton, C. Bloomer, and L. Bobb, “Development of Non-Invasive Calibration Software for Front End X-Ray Beam Position Monitors at Diamond Light Source, Oxfordshire, UK”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 59-61. doi:10.18429/JACoW-IBIC2022-MOP15
[n] A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
[n] X. Qi, Z. Hao, and W. Zhang, “The Status of the CSNS/RCS Power Supply System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2850-2852. doi:10.18429/JACoW-IPAC2018-WEPML070
[n] A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3094-3097.
[n] F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
[n] W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2793-2796.
[n] F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
[n] R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
[n] J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished.
[n] R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
[n] K. Nakajima et al., “A Short Pulse X-Ray Generation via Thomson Scattering of Ultrashort Laser Pulses by Relativistic Electron Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V014, pp. 760-762.
[n] L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
[n] JP. de Brion, R. Dei-Cas, and H. Leboutet, “A Magnetic Compressor for a 5 MeV Electron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 961-964.
[n] S. M. Matsubara, A. Maekawa, and H. Tomizawa, “A Probe Laser Source for Single-Shot EO-Based 3D Bunch Charge Distribution Monitor”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC15, pp. 269-272.
[n] R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1953-1956.
[n] S. Mazzoni et al., “Recent Results on Non-invasive Beam Size Measurement Methods Based on Polarization Currents”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 464-467. doi:10.18429/JACoW-IBIC2018-WEPB14
[n] T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
For LaTeX
Use Complete Form
For BibTeX
References
- E. D. Bush et al., “LAMPF Transition-Region Mechanical Fabrication”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3083-3086.
- A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1734-1735.
- A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3131-3134.
- S. Fu et al., “Status of the China Spallation Neutron Source Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH1GRI02, pp. 3053-3057.
- M. A. Oothoudt, C. Pillai, and M. V. Zumbro, “Automatic Beam Position Control at LASREF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P044, pp. 2064-2066.
- D. Teytelman et al., “Measurements of Transverse Coupled-bunch Instabilities in PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT160, pp. 2834-2836.
- C. Bloomer, G. Rehm, and A. Tipper, “Fast Feedback Using Electron Beam Steering to Maintain the X-Ray Beam Position at a Monochromatic X-Ray Diagnostic at Diamond Light Source”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 172-176.
- C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
- T. Reid, Z. A. Conway, S. M. Gerbick, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “Electropolishing for Low-Beta and Quasi-Waveguide SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3273-3275.
- J. W. Wang et al., “Wakefield Measuremetns of SLAC Linac Structures at the Argonne AATF”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3219-3222.
- B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
- C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 67-70.
- C. E. Houghton, C. Bloomer, and L. Bobb, “Development of Non-Invasive Calibration Software for Front End X-Ray Beam Position Monitors at Diamond Light Source, Oxfordshire, UK”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 59-61.
- A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
- X. Qi, Z. Hao, and W. Zhang, “The Status of the CSNS/RCS Power Supply System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2850-2852.
- A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3094-3097.
- F. J. Decker, R. K. Jobe, N. Merminga, and K. A. Thompson, “Controlling Multi-Bunches by a Fast Phase Switching”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU423, pp. 364-366.
- W. Brefeld and P. Gurtler, “A Bypass for Synchrotron Radiation Experiments at the Storage Ring PETRA II”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2793-2796.
- F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
- R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
- J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished.
- R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4180-4183.
- K. Nakajima et al., “A Short Pulse X-Ray Generation via Thomson Scattering of Ultrashort Laser Pulses by Relativistic Electron Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V014, pp. 760-762.
- L. Reginato, C. Peters, D. Vanecek, S. Yu, and F. Deadrick, “Engineering Conceptual Design of the Relativistic Klystron Two-Beam Accelerator Based Power Source for 1-TeV Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC18, pp. 743-745.
- JP. de Brion, R. Dei-Cas, and H. Leboutet, “A Magnetic Compressor for a 5 MeV Electron Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 961-964.
- S. M. Matsubara, A. Maekawa, and H. Tomizawa, “A Probe Laser Source for Single-Shot EO-Based 3D Bunch Charge Distribution Monitor”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC15, pp. 269-272.
- R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1953-1956.
- S. Mazzoni et al., “Recent Results on Non-invasive Beam Size Measurement Methods Based on Polarization Currents”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 464-467.
- T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
Back to search