Favourites
For Word
[n] V. Grattoni, S. Casalbuoni, and B. Marchetti, “Tolerance Study on the Geometrical Errors for a Planar Superconducting Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2734-2736. doi:10.18429/JACoW-IPAC2022-THPOPT060
[n] J. H. Shao et al., “Generation of High Power Short Rf Pulses using an X-Band Metallic Power Extractor Driven by High Charge Multi-Bunch Train”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 734-737. doi:10.18429/JACoW-IPAC2019-MOPRB069
[n] A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
[n] L. Malagutti et al., “Anodically bonded bent crystals: an advanced tool for channeling applications in particle beams steering”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC48, unpublished.
[n] M. Cieslak-Kowalska, J. L. Abelleira, E. Benedetto, and C. Bracco, “Evolution of High Intensity Beams in the CERN PS Booster after H- Injection and Phase Space Painting”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 656-659. doi:10.18429/JACoW-IPAC2016-MOPOR024
[n] Ju. V. Bylinsky et al., “Meson Factory Accelerating Structure Tuning”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1202-1205.
[n] Y. He et al., “Accelerator driven system – a solution to multiple problems of society”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5205-5209. doi:10.18429/JACoW-IPAC2023-FRYG2
[n] V. Belkovets et al., “Experimental Set-up for Multiplication Coefficient Fluctuation Study vs Accelerator Parameter Deviations on the JINR Pulsed Acclerator Driven Neutron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC16, pp. 152-154.
[n] M. Apollonio, W. J. Hoffman, A. J. Rose, A. Thomson, and R. Bartolini, “Girder Alignment in the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME054, pp. 3052-3054.
[n] S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
[n] W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
[n] V. Veshcherevich et al., “Design of High Power Input Coupler for Cornell ERL Injector Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP54, pp. 590-592.
[n] M. Tashiro and T. Nakanishi, “Diffusion of a Circulating Beam by the RF-Knockout with a Spectrum including Many Bands”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS039, pp. 3508-3510.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Grattoni, S. Casalbuoni, and B. Marchetti, “Tolerance Study on the Geometrical Errors for a Planar Superconducting Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2734-2736.
- J. H. Shao et al., “Generation of High Power Short Rf Pulses using an X-Band Metallic Power Extractor Driven by High Charge Multi-Bunch Train”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 734-737.
- A.-S. M??ller et al., “Characterizing THz Coherent Synchrotron Radiation at the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC046, pp. 2091-2093.
- L. Malagutti et al., “Anodically bonded bent crystals: an advanced tool for channeling applications in particle beams steering”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC48, unpublished.
- M. Cieslak-Kowalska, J. L. Abelleira, E. Benedetto, and C. Bracco, “Evolution of High Intensity Beams in the CERN PS Booster after H- Injection and Phase Space Painting”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 656-659.
- Ju. V. Bylinsky et al., “Meson Factory Accelerating Structure Tuning”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1202-1205.
- Y. He et al., “Accelerator driven system – a solution to multiple problems of society”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRYG2, pp. 5205-5209.
- V. Belkovets et al., “Experimental Set-up for Multiplication Coefficient Fluctuation Study vs Accelerator Parameter Deviations on the JINR Pulsed Acclerator Driven Neutron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC16, pp. 152-154.
- M. Apollonio, W. J. Hoffman, A. J. Rose, A. Thomson, and R. Bartolini, “Girder Alignment in the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME054, pp. 3052-3054.
- S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
- W. C. Turner et al., “Reduction of Beam Corkscrew Motion on the Eta-II Linear Induction Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU447, pp. 435-437.
- V. Veshcherevich et al., “Design of High Power Input Coupler for Cornell ERL Injector Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP54, pp. 590-592.
- M. Tashiro and T. Nakanishi, “Diffusion of a Circulating Beam by the RF-Knockout with a Spectrum including Many Bands”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS039, pp. 3508-3510.
Back to search
