Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Geloni, V. Kocharyan, and E. Saldin, “Improvement of the Crossed Undulator Design for Effective Circular Polarization”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB25, pp. 61-64.
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
[n] K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n] R. Appleby et al., “The 2mrad Crossing Angle Interaction Region and Extraction Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS077, pp. 730-732.
[n] J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2579-2581. doi:10.18429/JACoW-IPAC2016-WEPMY015
[n] M. Wendt et al., “High Resolution Cavity BPM for the CLIC Test Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM032, pp. 189-193.
[n] P. M. McIntyre and W. Shen, “16 Tesla Block-Coil Dipole for Future Hadron Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ31, pp. 1462-1464.
[n] M. Kase, “PRESENT STATUS OF THE RIKEN RING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P24, pp. XX-XX.
[n] S. Z. Zhang, Y.-M. Abiven, F. Blache, D. Corruble, C. K. Kheffafa, and S. M. Minolli, “Revolution Project: Progress in the Evolution of Soleil Motion Control Model”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 201-204. doi:10.18429/JACoW-ICALEPCS2015-MOPGF047
[n] D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
[n] V. A. Dolgashev, “Traveling Wave Linear Accelerator With RF Power Flow Outside of Accelerating Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 48-51. doi:10.18429/JACoW-LINAC2016-MOOP04
[n] K. Saito and P. Kneisel, “Temperature Dependence of the Surface Resistance of Niobium at 1300 MHz - Comparison to BCS Theory -”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP031, pp. 277-282.
[n] J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 496-499. doi:10.18429/JACoW-IPAC2019-MOPMP027
[n] T. Kamps, K. Holldack, and P. Kuske, “Optical Transition Radiation Based Beam Diagnostics at the BESSY Synchrotron Radiation Source and FEL Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT027, pp. 2532-2534.
[n] H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
[n] P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
[n] W. J. Gallagher, “Relativistic Multipactoring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2008-2010.
[n] J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4516-4518. doi:10.18429/JACoW-IPAC2017-THPVA037
[n] M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3417-3419. doi:10.18429/JACoW-IPAC2016-THPMR014
[n] G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
[n] R. S. Larsen, “Challenges for Emerging New Electronics Standards for Physics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAUIO05, pp. 558-562.
[n] S. Federmann, F. Caspers, A. Grudiev, E. Montesinos, and I. Syratchev, “High Temperature Radio Frequency Loads”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS103, pp. 1783-1785.
[n] N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
[n] H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1410-1413.
[n] Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP024, unpublished.
[n] B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
[n] J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
[n] S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 424-426. doi:10.18429/JACoW-MEDSI2018-THPH41
[n] A. V. Smirnov, “On the Characterization of a CCR Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1926-1928. doi:10.18429/JACoW-IPAC2015-TUPMA041
[n] L. R. Evans, “The Large Hadron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD04, pp. 40-44.
[n] D. Trbojevic, Y. Papaphilippou, S. Peggs, and R. de Maria, “Lattice without Transition Energy for the Future PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC129, pp. 370-372.
[n] G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
[n] Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
[n] T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
[n] G. Arduini, H. Burkhardt, K. Cornelis, Y. Papaphilippou, F. Zimmermann, and M. P. Zorzano, “Measurements of Coherent Tune Shifts and Head-Tail Growth Rates at the CERN SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B09, pp. 1447-1452.
[n] X. Shen et al., “AC Dipole Based Optics Measurement and Correction at RHIC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA04, pp. 526-528.
[n] D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 120-123. doi:10.18429/JACoW-IBIC2020-WEPP12
[n] M. Schaer et al., “Optimization Studies for the SwissFEL RF-Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI062, pp. 425-427.
[n] M. Verderi et al., “PEPITES: an ultra-thin beam profiler with wide dynamic range for charged particle beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 521-524. doi:10.18429/JACoW-IBIC2025-TUPMO24
[n] G. A. Bartholomew, “Research Possibilities with an Intense Neutron Generator”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-005, pp. XX-XX.
[n] Y. Yamazaki et al., “Development of the 1 GeV Proton Linac for the Japanese Hadron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 947-950.
[n] N. M. Jecklin et al., “Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP073, pp. 611-613.
[n] E. P, E. Klopfer, and P. Kostka, “The New 5 MeV Electorstatic Ion Accelerator at the Central Research Institute for Physics, Budapest, Hungary”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 82-85.
[n] W. J. Corbett, W. Y. Mok, and K. Tian, “Bunch Pattern Measurement via Single Photon Counting at SPEAR3”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD21, pp. 195-198.
[n] V. Kornilov, O. Boine-Frankenheim, and V. V. Kapin, “Coherent Instability Thresholds and Dynamic Aperture with Octupoles and Nonlinear Space-Charge in the SIS100 Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD029, pp. 1988-1990.
[n] Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
[n] G. Stancari et al., “Collimation Studies with Hollow Electron Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEODA02, pp. 1939-1941.
[n] Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
[n] P. K. Saha et al., “Preliminary Studies of Laser-assisted H- Stripping at 400 MeV”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3795-3797. doi:10.18429/JACoW-IPAC2015-THPF043
[n] N. Biancacci et al., “LEIR Impedance Model and Coherent Beam Instability Observations”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3159-3162. doi:10.18429/JACoW-IPAC2017-WEPIK094
[n] D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
[n] F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “A Fast Particle Tracking Tool for the Simulation of Dielectric Laser Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3716-3719. doi:10.18429/JACoW-IPAC2017-THPAB013
[n] C. Nieter, Y. Choi, and D. A. Dimitrov, “Modeling the Development and Mitigation of Charge Accumulation for Photo Emission Electron Guns”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM30, pp. 700-702.
[n] V. Litvinenko, “Advances in Coherent Electron Cooling”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THAM2HA02, pp. 175-183.
[n] C. K. Allen and M. Reiser, “Review of Image Effects on Particle Beams in Cylindrical Pipes”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V015, pp. 1526-1528.
[n] A. Arteche, S. E. Bashforth, A. Bosco, S. M. Gibson, M. Krupa, and T. Lef?¿vre, “Beam Measurements at the CERN SPS Using Interferometric Electro-Optic Pickups”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 457-460. doi:10.18429/JACoW-IBIC2019-WEAO04
[n] G. A. Blair et al., “Beam Profile Measurements with the 2-D Laser-wire”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH050, pp. 1121-1123.
[n] E. Chiadroni et al., “High Energy Emittance Measurement at SPARC”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD44, pp. 402-404.
[n] C. Liebig, M. Huening, and M. Schmitz, “Construction and First Tests of the New Injection System for the Linac II at DESY”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI011, pp. 303-305.
[n] T. Aumeyr et al., “Zemax Simulations of Diffraction and Transition Radiation”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF18, pp. 852-855.
[n] E. Huttel, I. Birkel, A.-S. M??ller, and P. Wesolowski, “Low Beta Structure for the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC024, pp. 2034-2036.
[n] C. F. Papadopoulos et al., “Injector Design Studies for NGLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO69, pp. 391-394.
[n] J. A. Martin, “The Separated-Orbit Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-004, pp. XX-XX.
[n] G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 451-453. doi:10.18429/JACoW-IPAC2014-MOPME033
[n] I. Rodriguez et al., “Detailed Design, Manufacturing and Testing of a Strip-line Extraction Kicker for CTF3 Combiner Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD014, pp. 1458-1460.
[n] R. E. Meller, “Thermodynamic Mechanism for Bunch Lengthening”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1155-1158.
[n] E. Pl?Ânjes, B. Faatz, J. Feldhaus, M. Kuhlmann, K. I. Tiedtke, and R. Treusch, “FLASH2 Beamline and Phontondiagnostics Concepts”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO50, pp. 614-617.
[n] K. V. Ettinger and F. R. Stewart, “A Non-intercepting Cyclotron Beam Monitor”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D17, pp. XX-XX.
[n] A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2133-2135. doi:10.18429/JACoW-IPAC2017-TUPVA034
[n] V. Andreev et al., “First Results with the Full Niobium Superconducting RFQ Resonator at INFN-LNL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOAF202, pp. 324-326.
[n] D. Trbojevic and V. S. Morozov, “Innovative Superconducting Non Scaling Fixed Field Alternating Gradient Isocentric Gantry for Carbon Cancer Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS029, pp. 2544-2546.
[n] G. Riddone, T. O. Niinikoski, F. Rossi, R. J. Raatikainen, K. ?ûsterberg, and A. Samoshkin, “Improved Modelling of the Thermo-mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR033, pp. 1891-1893.
[n] A. Terebilo, C. Pellegrini, M. Cornacchia, J. Corbett, and D. Martin, “Measurement of the Variation of Machine Parameters and the Effect of the Power Supplies Ripple on the Instantaneous Tunes at SPEAR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V046, pp. 1490-1492.
[n] A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
[n] A. Sato, “DESIGN AND CONSTRUCTION STATUS OF AN FFAG FOR THE PRISM PROJECT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19C5, pp. XX-XX.
[n] J. Irwin, N. Walker, and Y. T. Yan, “The Application of Lie Algebra Methods to PEP-II Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 899-902.
[n] B. Cole, G. Bourianoff, F. Pilat, and R. Talman, “Particle Orbit Tracking on a Parallel Computer: Hypertrack”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 204-207.
[n] S. Lescano, E. P. Coelho, G. R. S. Franco, P. H. Nallin, G. C. Pinton, and A. R. D. Rodrigues, “UVX Control System: An Approach with Beaglebone Black”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 91-93. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO03
[n] X. Huang, S.-Y. Lee, and K. Y. Ng, “Emittance Measurement and Modeling for the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAAB03, pp. 799-803.
[n] R. Parodi, P. Fabbricatore, G. Gemme, and R. Musenich, “Microwave Performances of Two Cavities Fully Coated by YBCO”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I29, pp. XX-XX.
[n] J.-L. Revol et al., “Status of the ESRF-Extremely Brilliant Source Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2882-2885. doi:10.18429/JACoW-IPAC2018-THXGBD3
[n] S. X. Zheng et al., “Status of CPHS Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO051, pp. 3887-3889.
[n] A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Performance of Linear Collider Beam-Based Alignment Algorithms at FACET”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR029, pp. 1879-1881.
[n] Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
[n] A. J. DeMello et al., “Progress on MICE RFCC Module for the MICE Experiment”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP290, pp. 1370-1372.
[n] C. J. Spataro, C. Amundsen, H. Bassan, and S. K. Sharma, “NSLS-II Beam Aperture Slit Vibration Studies”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 239-241. doi:10.18429/JACoW-MEDSI2016-TUPE33
[n] S. K. Sharma, C. Amundsen, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Recent Progress on the Design of High-Heat-Load Components”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 277-279. doi:10.18429/JACoW-MEDSI2016-WEBA03
[n] M. Fukuda et al., “Use of Microbeam at JAEA Takasaki”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZH102, pp. 588-591.
[n] R. H. Soares, M. J. Barnes, S. Calatroni, J. W. Kovermann, and W. Wuensch, “A 12 kV, 1 kHz, Pulse Generator for Breakdown Studies of Samples for CLIC RF Accelerating Structures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC061, pp. 3431-3433.
[n] C. P. Welsch, T. Cybulski, R. Boll, S. Sellner, S. Tegami, and M. Holzscheiter, “Development of Imaging Techniques for Medical Accelerators in the QUASAR Group”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP012, pp. 2160-2162.
[n] J. Qiang, C. E. Mitchell, S. Paret, R. D. Ryne, and Y. X. Chao, “A Parallel Multi-objective Differential Evolution Algorithm for Photoinjector Beam Dynamics Optimization”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO062, pp. 1031-1033.
[n] P. Valente et al., “Detectors for Absolute Luminosity Measurement at DAFNE”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD23, pp. 345-347.
[n] P. Baudrenghien and T. Mastoridis, “Proposal for an RF Roadmap Towards Ultimate Intensity in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC015, pp. 154-156.
[n] B. DeGraff et al., “Spallation Neutron Source Cryogenic Test Facility Horizontal Test Apparatus Operation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4043-4045. doi:10.18429/JACoW-IPAC2014-THPRI113
[n] L. Mether et al., “Electron Cloud Effects in the CERN Accelerators in Run 3”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 538-542. doi:10.18429/JACoW-HB2023-THBP31
[n] D. C. Plostinar, M. Ikegami, Y. Liu, and T. Maruta, “Measurement of Resonant Space Charge Effects in the J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO087, pp. 3966-3968.
[n] W. Bartmann et al., “Injection and Extraction Considerations for a 2 GeV RCS at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS054, pp. 3550-3552.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Geloni, V. Kocharyan, and E. Saldin, “Improvement of the Crossed Undulator Design for Effective Circular Polarization”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB25, pp. 61-64.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
- K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1766-1768.
- R. Appleby et al., “The 2mrad Crossing Angle Interaction Region and Extraction Line”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS077, pp. 730-732.
- J. Kim, M. Kim, I. H. Nam, H. Suk, and M. S. Hur, “Numerical Studies on Tunable Coherent Radiations with a Laser-Plasma Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2579-2581.
- M. Wendt et al., “High Resolution Cavity BPM for the CLIC Test Facility”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM032, pp. 189-193.
- P. M. McIntyre and W. Shen, “16 Tesla Block-Coil Dipole for Future Hadron Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ31, pp. 1462-1464.
- M. Kase, “PRESENT STATUS OF THE RIKEN RING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P24, pp. XX-XX.
- S. Z. Zhang, Y.-M. Abiven, F. Blache, D. Corruble, C. K. Kheffafa, and S. M. Minolli, “Revolution Project: Progress in the Evolution of Soleil Motion Control Model”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 201-204.
- D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
- V. A. Dolgashev, “Traveling Wave Linear Accelerator With RF Power Flow Outside of Accelerating Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 48-51.
- K. Saito and P. Kneisel, “Temperature Dependence of the Surface Resistance of Niobium at 1300 MHz - Comparison to BCS Theory -”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP031, pp. 277-282.
- J. Keintzel et al., “Second Order Dispersion Measurements in LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 496-499.
- T. Kamps, K. Holldack, and P. Kuske, “Optical Transition Radiation Based Beam Diagnostics at the BESSY Synchrotron Radiation Source and FEL Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT027, pp. 2532-2534.
- H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
- P. N. Ostroumov, “Heavy Ion Superconducting Linacs: Status and Upgrade Projects”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA01, pp. 196-196.
- W. J. Gallagher, “Relativistic Multipactoring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 2008-2010.
- J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4516-4518.
- M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3417-3419.
- G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
- R. S. Larsen, “Challenges for Emerging New Electronics Standards for Physics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAUIO05, pp. 558-562.
- S. Federmann, F. Caspers, A. Grudiev, E. Montesinos, and I. Syratchev, “High Temperature Radio Frequency Loads”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS103, pp. 1783-1785.
- N. Akasaka et al., “C-band RF Main Linac System for eE- Linear Collider at 500 GeV to 1 TeV C.M. Energy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP087G, pp. 792-794.
- H.-D. Nuhn et al., “A Longitudinal Multibunch Feedback System for PEP”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1410-1413.
- Y. Y. Du et al., “The Design and Optimization of Digital Beam Position Monitor Processor in HEPS”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP024, unpublished.
- B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
- J. Alessi et al., “The AGS H RFQ Preinjector”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-59, pp. 196-198.
- S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 424-426.
- A. V. Smirnov, “On the Characterization of a CCR Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1926-1928.
- L. R. Evans, “The Large Hadron Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD04, pp. 40-44.
- D. Trbojevic, Y. Papaphilippou, S. Peggs, and R. de Maria, “Lattice without Transition Energy for the Future PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC129, pp. 370-372.
- G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
- Y. Takeda and M. A. Plum, “Thermal Simulations of Charge-exchange Stripper Foils for High-melting-point Materials”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI011, pp. 3312-3314.
- T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
- G. Arduini, H. Burkhardt, K. Cornelis, Y. Papaphilippou, F. Zimmermann, and M. P. Zorzano, “Measurements of Coherent Tune Shifts and Head-Tail Growth Rates at the CERN SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B09, pp. 1447-1452.
- X. Shen et al., “AC Dipole Based Optics Measurement and Correction at RHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA04, pp. 526-528.
- D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 120-123.
- M. Schaer et al., “Optimization Studies for the SwissFEL RF-Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI062, pp. 425-427.
- M. Verderi et al., “PEPITES: an ultra-thin beam profiler with wide dynamic range for charged particle beams”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 521-524.
- G. A. Bartholomew, “Research Possibilities with an Intense Neutron Generator”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper E-005, pp. XX-XX.
- Y. Yamazaki et al., “Development of the 1 GeV Proton Linac for the Japanese Hadron Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 947-950.
- N. M. Jecklin et al., “Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP073, pp. 611-613.
- E. P, E. Klopfer, and P. Kostka, “The New 5 MeV Electorstatic Ion Accelerator at the Central Research Institute for Physics, Budapest, Hungary”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 82-85.
- W. J. Corbett, W. Y. Mok, and K. Tian, “Bunch Pattern Measurement via Single Photon Counting at SPEAR3”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD21, pp. 195-198.
- V. Kornilov, O. Boine-Frankenheim, and V. V. Kapin, “Coherent Instability Thresholds and Dynamic Aperture with Octupoles and Nonlinear Space-Charge in the SIS100 Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD029, pp. 1988-1990.
- Y. D. Chernousov, A. M. Barnyakov, A. E. Levichev, V. M. Pavlov, V. Ivannikov, and I. V. Shebolaev, “Localization of the RF Breakdown in the Parallel Coupled Accelerating Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA018, pp. 281-283.
- G. Stancari et al., “Collimation Studies with Hollow Electron Beams”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEODA02, pp. 1939-1941.
- Y. Jongen et al., “Iba C400 Cyclotron Project For Hadron Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 151-156.
- P. K. Saha et al., “Preliminary Studies of Laser-assisted H- Stripping at 400 MeV”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3795-3797.
- N. Biancacci et al., “LEIR Impedance Model and Coherent Beam Instability Observations”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3159-3162.
- D. Filippetto et al., “APEX Initial Commissioning Results”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOAI01, pp. 337-344.
- F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “A Fast Particle Tracking Tool for the Simulation of Dielectric Laser Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3716-3719.
- C. Nieter, Y. Choi, and D. A. Dimitrov, “Modeling the Development and Mitigation of Charge Accumulation for Photo Emission Electron Guns”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM30, pp. 700-702.
- V. Litvinenko, “Advances in Coherent Electron Cooling”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THAM2HA02, pp. 175-183.
- C. K. Allen and M. Reiser, “Review of Image Effects on Particle Beams in Cylindrical Pipes”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V015, pp. 1526-1528.
- A. Arteche, S. E. Bashforth, A. Bosco, S. M. Gibson, M. Krupa, and T. Lef?¿vre, “Beam Measurements at the CERN SPS Using Interferometric Electro-Optic Pickups”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 457-460.
- G. A. Blair et al., “Beam Profile Measurements with the 2-D Laser-wire”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH050, pp. 1121-1123.
- E. Chiadroni et al., “High Energy Emittance Measurement at SPARC”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD44, pp. 402-404.
- C. Liebig, M. Huening, and M. Schmitz, “Construction and First Tests of the New Injection System for the Linac II at DESY”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI011, pp. 303-305.
- T. Aumeyr et al., “Zemax Simulations of Diffraction and Transition Radiation”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF18, pp. 852-855.
- E. Huttel, I. Birkel, A.-S. M??ller, and P. Wesolowski, “Low Beta Structure for the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC024, pp. 2034-2036.
- C. F. Papadopoulos et al., “Injector Design Studies for NGLS”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO69, pp. 391-394.
- J. A. Martin, “The Separated-Orbit Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper E-004, pp. XX-XX.
- G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 451-453.
- I. Rodriguez et al., “Detailed Design, Manufacturing and Testing of a Strip-line Extraction Kicker for CTF3 Combiner Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD014, pp. 1458-1460.
- R. E. Meller, “Thermodynamic Mechanism for Bunch Lengthening”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1155-1158.
- E. Pl?Ânjes, B. Faatz, J. Feldhaus, M. Kuhlmann, K. I. Tiedtke, and R. Treusch, “FLASH2 Beamline and Phontondiagnostics Concepts”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO50, pp. 614-617.
- K. V. Ettinger and F. R. Stewart, “A Non-intercepting Cyclotron Beam Monitor”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D17, pp. XX-XX.
- A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2133-2135.
- V. Andreev et al., “First Results with the Full Niobium Superconducting RFQ Resonator at INFN-LNL”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOAF202, pp. 324-326.
- D. Trbojevic and V. S. Morozov, “Innovative Superconducting Non Scaling Fixed Field Alternating Gradient Isocentric Gantry for Carbon Cancer Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS029, pp. 2544-2546.
- G. Riddone, T. O. Niinikoski, F. Rossi, R. J. Raatikainen, K. ?ûsterberg, and A. Samoshkin, “Improved Modelling of the Thermo-mechanical Behavior of the CLIC Two-Beam Module”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR033, pp. 1891-1893.
- A. Terebilo, C. Pellegrini, M. Cornacchia, J. Corbett, and D. Martin, “Measurement of the Variation of Machine Parameters and the Effect of the Power Supplies Ripple on the Instantaneous Tunes at SPEAR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V046, pp. 1490-1492.
- A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
- A. Sato, “DESIGN AND CONSTRUCTION STATUS OF AN FFAG FOR THE PRISM PROJECT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19C5, pp. XX-XX.
- J. Irwin, N. Walker, and Y. T. Yan, “The Application of Lie Algebra Methods to PEP-II Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 899-902.
- B. Cole, G. Bourianoff, F. Pilat, and R. Talman, “Particle Orbit Tracking on a Parallel Computer: Hypertrack”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 204-207.
- S. Lescano, E. P. Coelho, G. R. S. Franco, P. H. Nallin, G. C. Pinton, and A. R. D. Rodrigues, “UVX Control System: An Approach with Beaglebone Black”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 91-93.
- X. Huang, S.-Y. Lee, and K. Y. Ng, “Emittance Measurement and Modeling for the Fermilab Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAAB03, pp. 799-803.
- R. Parodi, P. Fabbricatore, G. Gemme, and R. Musenich, “Microwave Performances of Two Cavities Fully Coated by YBCO”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I29, pp. XX-XX.
- J.-L. Revol et al., “Status of the ESRF-Extremely Brilliant Source Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2882-2885.
- S. X. Zheng et al., “Status of CPHS Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO051, pp. 3887-3889.
- A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Performance of Linear Collider Beam-Based Alignment Algorithms at FACET”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR029, pp. 1879-1881.
- Y. Xu, A. Facco, M. J. Johnson, S. J. Miller, and J. Popielarski, “Electromagnetic Optimization of the FRIB 322 MHz =0.29 Half Wave Resonator”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO046, pp. 200-202.
- A. J. DeMello et al., “Progress on MICE RFCC Module for the MICE Experiment”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP290, pp. 1370-1372.
- C. J. Spataro, C. Amundsen, H. Bassan, and S. K. Sharma, “NSLS-II Beam Aperture Slit Vibration Studies”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 239-241.
- S. K. Sharma, C. Amundsen, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Recent Progress on the Design of High-Heat-Load Components”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 277-279.
- M. Fukuda et al., “Use of Microbeam at JAEA Takasaki”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THZH102, pp. 588-591.
- R. H. Soares, M. J. Barnes, S. Calatroni, J. W. Kovermann, and W. Wuensch, “A 12 kV, 1 kHz, Pulse Generator for Breakdown Studies of Samples for CLIC RF Accelerating Structures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC061, pp. 3431-3433.
- C. P. Welsch, T. Cybulski, R. Boll, S. Sellner, S. Tegami, and M. Holzscheiter, “Development of Imaging Techniques for Medical Accelerators in the QUASAR Group”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP012, pp. 2160-2162.
- J. Qiang, C. E. Mitchell, S. Paret, R. D. Ryne, and Y. X. Chao, “A Parallel Multi-objective Differential Evolution Algorithm for Photoinjector Beam Dynamics Optimization”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO062, pp. 1031-1033.
- P. Valente et al., “Detectors for Absolute Luminosity Measurement at DAFNE”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD23, pp. 345-347.
- P. Baudrenghien and T. Mastoridis, “Proposal for an RF Roadmap Towards Ultimate Intensity in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC015, pp. 154-156.
- B. DeGraff et al., “Spallation Neutron Source Cryogenic Test Facility Horizontal Test Apparatus Operation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4043-4045.
- L. Mether et al., “Electron Cloud Effects in the CERN Accelerators in Run 3”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP31, pp. 538-542.
- D. C. Plostinar, M. Ikegami, Y. Liu, and T. Maruta, “Measurement of Resonant Space Charge Effects in the J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO087, pp. 3966-3968.
- W. Bartmann et al., “Injection and Extraction Considerations for a 2 GeV RCS at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS054, pp. 3550-3552.
Back to search