Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Wang et al., “High Power Test of the S-Band Spherical Pulse Compressor at Tsinghua University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4008-4010. doi:10.18429/JACoW-IPAC2018-THPAL153
[n] K. Cornelis, W. Herr, and M. Meddahi, “Proton Antiproton Collisions at a Finite Crossing Angle in the SPS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 153-156.
[n] C. K. Sinclair, I. V. Bazarov, B. M. Dunham, Y. Li, X. G. Liu, and K. W. Smolenski, “Performance of a Very High Voltage Photoemission Electron Gun for a High Brightness, High Average Current ERL Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS021, pp. 1224-1226.
[n] F. Furuta et al., “High Reliable Surface Treatment Recipe of High Gradient Single Cell SRF Cavities at KEK”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP10, pp. XX-XX.
[n] V. Ptitsyn et al., “The ERL-based Design of Electron-Hadron Collider eRHIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2482-2485. doi:10.18429/JACoW-IPAC2016-WEPMW027
[n] Y. Lei, X. Guan, R. Tang, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “Experimental Study of Tuning Method on a Model Alvarez DTL Cavity for CPHS Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 756-758. doi:10.18429/JACoW-LINAC2018-THPO034
[n] T. Sen, C. M. Bhat, H. J. Kim, and J.-F. Ostiguy, “Dynamics of Flat Bunches with Second Harmonic RF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD067, pp. 2078-2080.
[n] N. Yamamoto, S. Sakanaka, and T. Takahashi, “Simulation Study of Normal-Conducting Double RF System for the 3-GeV KEK Light Source Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4176-4179. doi:10.18429/JACoW-IPAC2017-THPIK037
[n] R. Xiang, A. Arnold, P. Michel, P. Murcek, and J. Teichert, “Thermal Emittance Measurement of the Cs2Te Photocathode in FZD Superconducting RF Gun”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB22, pp. 449-452.
[n] R. M??ller et al., “Coherent Synchrotron Radiation at the Metrology Light Source of the PTB”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC033, pp. 2058-2060.
[n] D. Morris, G. LeBlanc, D. C. McGilvery, and J. Trewhella, “Maximising Beam Availability at the Australian Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA002, pp. 2469-2471.
[n] T. Sen and M. P. Zorzano, “Emittance Growth of the LHC Beam due to the Effect of Head-on Beam-Beam Interaction and Ground Motion”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B07, pp. 1226-1228.
[n] F. Perez, “A Proposed RF System for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP094L, pp. 2071-2073.
[n] J.-P. Carneiro and D. E. Johnson, “Start-to-End Simulations for the Proposed Fermilab High Intensity Proton Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS012, pp. 1676-1678.
[n] V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
[n] V. G. Ziemann et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches in FLASH at DESY”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH081, pp. 1199-1201.
[n] T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1669-1672. doi:10.18429/JACoW-IPAC2019-TUPGW110
[n] D. Robin, Z. K. Fisher, G. C. Pappas, and C. Sun, “Pulsed Multipole Injection for the ALS Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA068, pp. 2642-2644.
[n] S. P. Weathersby, M. Kosovsky, N. Kurita, A. Novokhatski, and J. Seeman, “A Proposal for a New HOM Absorber in a Straight Section of the PEP-II Low Energy Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP031, pp. 2173-2175.
[n] M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
[n] A. P. Zhukov and S. Assadi, “Beam Loss Simulation of SNS LINAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN060, pp. 4138-4140.
[n] R. F. Welton, “Overview of High-Brightness H- Ion Sources”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH101, pp. 559-563.
[n] C. Fischer, G. Ferioli, J. Koopman, and F. Roncarolo Geneva, “Beam Studies Made With The SPS Ionization Profile Monitor”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM11, pp. XX-XX.
[n] W. Herr, “Tune Spreads and Shifts Due to the Long Range Beam-Beam Effect in the LHC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1630-1633.
[n] A. Meseck and V. G. Ziemann, “Facility for Coherent THz and FIR Radiation”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP066, pp. 512-515.
[n] D. Jeon and S. Y. Lee, “Design of Minimum Emittance Lattices”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02F, pp. 397-399.
[n] P. Pierini, S. Barbanotti, L. Monaco, and N. Panzeri, “Design of the magnetic shield for TRASCO low beta elliptical cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP61, pp. XX-XX.
[n] M. Xiao and D. E. Johnson, “Recycler Lattice for Project X at Fermilab”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC058, pp. 367-370.
[n] A. Arnold et al., “Commissioning Results of the 2nd 3.5 Cell SRF Gun for ELBE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP066, pp. 578-580.
[n] H. Bach et al., “The ANKA Injector”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18F, pp. 632-634.
[n] S. Y. Xu and S. Fu, “Magnetic Field Tracking at CSNS/RCS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 306-308. doi:10.18429/JACoW-HB2018-WEP2PO018
[n] K. Jacobs et al., “Commissioning the MIT-Bates South Hall Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG05, pp. 327-329.
[n] M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
[n] E. Schneidmiller and M. V. Yurkov, “Spatial Properties of the Radiation from SASE FELs at the European XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD06, pp. 57-60.
[n] T. Pieloni, W. Herr, and J. Qiang, “Emittance Growth due to Beam-Beam Effects with a Static Offset in Collision in the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP039, pp. 2582-2584.
[n] K. Fukushima, T. Maruta, P. N. Ostroumov, and T. Yoshimoto, “No Beam-Loss Quadrupole Scan for Transverse Phase Space Measurements”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 650-652. doi:10.18429/JACoW-NAPAC2019-WEZBA3
[n] S. Y. Xu, S. X. Fang, and S. Wang, “The Study of Space Charge Effects for CSNS”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A03, pp. 420-424.
[n] T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1666-1668. doi:10.18429/JACoW-IPAC2019-TUPGW109
[n] V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
[n] E. Kako et al., “Improvement of Cavity Performance in the Saclay/Cornell/DESY's SC Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP011, pp. 179-186.
[n] N. Inabe, T. Katayama, T. Ohkawa, M. Takanaka, and S. Watanabe, “Study of a Magnet Power Supply for a MUSES Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP065G, pp. 2340-2342.
[n] T. Sen, “Dynamic Aperture in the Luminosity Upgraded HERA-e Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP34G, pp. 424-426.
[n] A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
[n] S. Y. Xu, S. X. Fang, and S. Wang, “The Study on the Space Charge Effects of RCS/CSNS”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TH4IODN04, pp. 239-244.
[n] M. Meddahi and W. Herr, “Aperture and Stability Studies for the CNGS Proton Beam Line”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT010, pp. 1150-1152.
[n] J. Branlard et al., “LLRF System Design and Performance for XFEL Cryomodules Continuous Wave Operation”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP086, pp. 1129-1131.
[n] D. Kostin, W.-D. Moeller, A. Goessel, and R. Lange, “Testing the FLASH superconducting accelerating modules”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP05, pp. XX-XX.
[n] G. Cox, “Control Desk: A Generic Control Application for the SRS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP564, pp. XX-XX.
[n] K. Cornelis, W. Herr, and A. Piwinski, “Experimental Study of Electron Positron Collisions in LEP with a Finite Crossing Angle”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 164-167.
[n] P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Comparison of Optimization Methods for Hybrid Seven-Bend-Achromat Lattice Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1532-1534. doi:10.18429/JACoW-IPAC2019-TUPGW055
[n] R. Xiang et al., “Photoemission Studies of Niobium and Lead Photocathodes Using Picosecond UV Laser”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP047, pp. 836-839.
[n] C.-Y. Tan, “New Multithreaded Code for Calculating Longitudinal Collective Instabilities Using Computers with Multiprocessors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH085, pp. 3039-3041.
[n] G. L. Orlandi, R. Ischebeck, V. Schlott, and B. Steffen, “Particle Density Effects in the Transition Radiation Energy Spectrum: Theory and Experimental Investigation at PSI”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB19, pp. 441-444.
[n] P. Kneisel and K. Saito, “Superconducting Niobium Cavities with High Gradients”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-42, pp. 160-162.
[n] S. R. Buckley and R. J. Smith, “Beam Loss Monitoring and Machine Protection Designs for the Daresbury Laboratory Energy Recovery Linac Prototype”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH038, pp. 1088-1090.
[n] M. Koratzinos, “Transverse Polarization for Energy Calibration at the Z-Peak”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SUT1A1, pp. 223-226.
[n] F. Perez and M. J. Vicente, “Lifetime Calculations for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP114G, pp. 1438-1440.
[n] J. Teichert et al., “Commissioning of an Improved Superconducting RF Photo Injector at ELBE”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP061, pp. 881-884.
[n] H. Reeg, J. Glatz, N. Schneider, and H. Walter, “Machine Protection by Active Current-transmission Control at GSI-UNILAC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH014, pp. 1025-1027.
[n] Y. Fukui, R. C. Fernow, and J. C. Gallardo, “Muon Polarization in a Front-End Channel of a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH021, pp. 2126-2128.
[n] C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736.
[n] H. H?ñhnel, C. M. Kleffner, U. Ratzinger, M. Syha, and R. Tiede, “End to End Simulations and Error Studies of the FAIR Proton Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 885-888. doi:10.18429/JACoW-IPAC2019-MOPTS019
[n] M. Y. Huang, S. Wang, and S. Y. Xu, “Study on the Phase Space Painting Injection during the Beam Commissioning for CSNS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 309-311. doi:10.18429/JACoW-HB2018-WEP2PO022
[n] J. M. Jowett, “The tau-CHARM Factory Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 368-371.
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] C. Y. Wong, K. Fukushima, and S. M. Lund, “Self-Consistent PIC Modeling of Near Source Transport of FRIB”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 441-444. doi:10.18429/JACoW-LINAC2016-TUPRC014
[n] A. A. Garren and L. Smith, “Diagnosis and Correction of Beam Behaviour in an Isochronous Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A03, pp. XX-XX.
[n] Q. S. Shu et al., “R & D in Progress to Overcome Field Emission in Superconducting Accelerator Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 491-494.
[n] F. E. Hannon, I. V. Bazarov, B. M. Dunham, Y. Li, and X. G. Liu, “Phase Space Tomography Using the Cornell ERL DC Gun”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC032, pp. 1119-1121.
[n] K. Fuchsberger et al., “JMAD - Integration of MADX into the JAVA World”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC006, pp. 465-467.
[n] A. Arnold et al., “Fabrication, Tuning, Treatment and Testing of Two 3.5 Cell Photo-Injector Cavities for the ELBE Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO019, pp. 405-407.
[n] A. Peters, H. Reeg, P. Forck, W. Vodel, and R. Neubert, “Recent Improvements of a Cryogenic Current Comparator for nA Ion Beams with High Intensity Dynamics”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS05, pp. XX-XX.
[n] R. Zeng, P. Jonsson, and W. Schappert, “Application Investigation of High Precision Measurement for Basic Cavity Parameters at ESS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP040, pp. 149-151.
[n] W. Wang et al., “2D Beam Profile Monitors at CPHS of Tsinghua University”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 298-301. doi:10.18429/JACoW-IPAC2017-MOPAB076
[n] E. Fol, J. M. Coello de Portugal, and R. Tom?ís, “Unsupervised Machine Learning for Detection of Faulty Beam Position Monitors”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2668-2671. doi:10.18429/JACoW-IPAC2019-WEPGW081
[n] H. Hayano et al., “Beam Tuning for Low Emittance in KEK-ATF Damping Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A12, pp. 483-485.
[n] P. N. Lu et al., “Transverse Emittance Measurement by Slit-scan Method for an SRF Photo Injector”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO44, pp. 322-324.
[n] G. D. Alton, J. Dellwo, R. F. Welton, and D. N. Smithe, “Computational Studies for an Advanced Design ECR Ion Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC12, pp. 1022-1024.
[n] Y. L. Jiang et al., “Design and Measurement of the X-Band Pulse Compressor for TTX”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4745-4748. doi:10.18429/JACoW-IPAC2018-THPML047
[n] E. N. Shaposhnikova et al., “Reference Measurements of the Longitudinal Impedance in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP056, pp. 4667-4669.
[n] H. J. Kim and T. Sen, “Beam-Beam Compensation Using Electron Lens in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP032, pp. 2561-2563.
[n] E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
[n] N. Inabe and T. Katayama, “Design of Double Storage Rings at MUSES”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06H, pp. 897-899.
[n] M. A. Plum, “Beam Loss Mitigation in the Oak Ridge Spallation Neutron Source”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C04, pp. 329-333.
[n] E. D. Courant, D. R. Douglas, A. A. Garren, and D. E. Johnson, “SSC Test Lattice Designs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1669-1672.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Wang et al., “High Power Test of the S-Band Spherical Pulse Compressor at Tsinghua University”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4008-4010.
- K. Cornelis, W. Herr, and M. Meddahi, “Proton Antiproton Collisions at a Finite Crossing Angle in the SPS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 153-156.
- C. K. Sinclair, I. V. Bazarov, B. M. Dunham, Y. Li, X. G. Liu, and K. W. Smolenski, “Performance of a Very High Voltage Photoemission Electron Gun for a High Brightness, High Average Current ERL Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS021, pp. 1224-1226.
- F. Furuta et al., “High Reliable Surface Treatment Recipe of High Gradient Single Cell SRF Cavities at KEK”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP10, pp. XX-XX.
- V. Ptitsyn et al., “The ERL-based Design of Electron-Hadron Collider eRHIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2482-2485.
- Y. Lei, X. Guan, R. Tang, X. W. Wang, Q. Z. Xing, and S. X. Zheng, “Experimental Study of Tuning Method on a Model Alvarez DTL Cavity for CPHS Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 756-758.
- T. Sen, C. M. Bhat, H. J. Kim, and J.-F. Ostiguy, “Dynamics of Flat Bunches with Second Harmonic RF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD067, pp. 2078-2080.
- N. Yamamoto, S. Sakanaka, and T. Takahashi, “Simulation Study of Normal-Conducting Double RF System for the 3-GeV KEK Light Source Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4176-4179.
- R. Xiang, A. Arnold, P. Michel, P. Murcek, and J. Teichert, “Thermal Emittance Measurement of the Cs2Te Photocathode in FZD Superconducting RF Gun”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB22, pp. 449-452.
- R. M??ller et al., “Coherent Synchrotron Radiation at the Metrology Light Source of the PTB”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC033, pp. 2058-2060.
- D. Morris, G. LeBlanc, D. C. McGilvery, and J. Trewhella, “Maximising Beam Availability at the Australian Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA002, pp. 2469-2471.
- T. Sen and M. P. Zorzano, “Emittance Growth of the LHC Beam due to the Effect of Head-on Beam-Beam Interaction and Ground Motion”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B07, pp. 1226-1228.
- F. Perez, “A Proposed RF System for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP094L, pp. 2071-2073.
- J.-P. Carneiro and D. E. Johnson, “Start-to-End Simulations for the Proposed Fermilab High Intensity Proton Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS012, pp. 1676-1678.
- V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
- V. G. Ziemann et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches in FLASH at DESY”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH081, pp. 1199-1201.
- T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1669-1672.
- D. Robin, Z. K. Fisher, G. C. Pappas, and C. Sun, “Pulsed Multipole Injection for the ALS Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA068, pp. 2642-2644.
- S. P. Weathersby, M. Kosovsky, N. Kurita, A. Novokhatski, and J. Seeman, “A Proposal for a New HOM Absorber in a Straight Section of the PEP-II Low Energy Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP031, pp. 2173-2175.
- M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
- A. P. Zhukov and S. Assadi, “Beam Loss Simulation of SNS LINAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN060, pp. 4138-4140.
- R. F. Welton, “Overview of High-Brightness H- Ion Sources”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH101, pp. 559-563.
- C. Fischer, G. Ferioli, J. Koopman, and F. Roncarolo Geneva, “Beam Studies Made With The SPS Ionization Profile Monitor”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM11, pp. XX-XX.
- W. Herr, “Tune Spreads and Shifts Due to the Long Range Beam-Beam Effect in the LHC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1630-1633.
- A. Meseck and V. G. Ziemann, “Facility for Coherent THz and FIR Radiation”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP066, pp. 512-515.
- D. Jeon and S. Y. Lee, “Design of Minimum Emittance Lattices”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02F, pp. 397-399.
- P. Pierini, S. Barbanotti, L. Monaco, and N. Panzeri, “Design of the magnetic shield for TRASCO low beta elliptical cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP61, pp. XX-XX.
- M. Xiao and D. E. Johnson, “Recycler Lattice for Project X at Fermilab”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC058, pp. 367-370.
- A. Arnold et al., “Commissioning Results of the 2nd 3.5 Cell SRF Gun for ELBE”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP066, pp. 578-580.
- H. Bach et al., “The ANKA Injector”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18F, pp. 632-634.
- S. Y. Xu and S. Fu, “Magnetic Field Tracking at CSNS/RCS”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 306-308.
- K. Jacobs et al., “Commissioning the MIT-Bates South Hall Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG05, pp. 327-329.
- M. F. Fernandes, J. Tan, and C. P. Welsch, “Cryogenic Current Comparator as Low Intensity Beam Current Monitor in the CERN Antiproton Decelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF25, pp. 267-270.
- E. Schneidmiller and M. V. Yurkov, “Spatial Properties of the Radiation from SASE FELs at the European XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD06, pp. 57-60.
- T. Pieloni, W. Herr, and J. Qiang, “Emittance Growth due to Beam-Beam Effects with a Static Offset in Collision in the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP039, pp. 2582-2584.
- K. Fukushima, T. Maruta, P. N. Ostroumov, and T. Yoshimoto, “No Beam-Loss Quadrupole Scan for Transverse Phase Space Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 650-652.
- S. Y. Xu, S. X. Fang, and S. Wang, “The Study of Space Charge Effects for CSNS”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1A03, pp. 420-424.
- T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1666-1668.
- V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576.
- E. Kako et al., “Improvement of Cavity Performance in the Saclay/Cornell/DESY's SC Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP011, pp. 179-186.
- N. Inabe, T. Katayama, T. Ohkawa, M. Takanaka, and S. Watanabe, “Study of a Magnet Power Supply for a MUSES Booster Synchrotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP065G, pp. 2340-2342.
- T. Sen, “Dynamic Aperture in the Luminosity Upgraded HERA-e Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP34G, pp. 424-426.
- A. Labrador and F. Perez, “Diagnostic System for the LLS. Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP40C, pp. 1547-1549.
- S. Y. Xu, S. X. Fang, and S. Wang, “The Study on the Space Charge Effects of RCS/CSNS”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TH4IODN04, pp. 239-244.
- M. Meddahi and W. Herr, “Aperture and Stability Studies for the CNGS Proton Beam Line”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT010, pp. 1150-1152.
- J. Branlard et al., “LLRF System Design and Performance for XFEL Cryomodules Continuous Wave Operation”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP086, pp. 1129-1131.
- D. Kostin, W.-D. Moeller, A. Goessel, and R. Lange, “Testing the FLASH superconducting accelerating modules”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP05, pp. XX-XX.
- G. Cox, “Control Desk: A Generic Control Application for the SRS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP564, pp. XX-XX.
- K. Cornelis, W. Herr, and A. Piwinski, “Experimental Study of Electron Positron Collisions in LEP with a Finite Crossing Angle”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 164-167.
- P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Comparison of Optimization Methods for Hybrid Seven-Bend-Achromat Lattice Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1532-1534.
- R. Xiang et al., “Photoemission Studies of Niobium and Lead Photocathodes Using Picosecond UV Laser”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP047, pp. 836-839.
- C.-Y. Tan, “New Multithreaded Code for Calculating Longitudinal Collective Instabilities Using Computers with Multiprocessors”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH085, pp. 3039-3041.
- G. L. Orlandi, R. Ischebeck, V. Schlott, and B. Steffen, “Particle Density Effects in the Transition Radiation Energy Spectrum: Theory and Experimental Investigation at PSI”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB19, pp. 441-444.
- P. Kneisel and K. Saito, “Superconducting Niobium Cavities with High Gradients”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-42, pp. 160-162.
- S. R. Buckley and R. J. Smith, “Beam Loss Monitoring and Machine Protection Designs for the Daresbury Laboratory Energy Recovery Linac Prototype”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH038, pp. 1088-1090.
- M. Koratzinos, “Transverse Polarization for Energy Calibration at the Z-Peak”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SUT1A1, pp. 223-226.
- F. Perez and M. J. Vicente, “Lifetime Calculations for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP114G, pp. 1438-1440.
- J. Teichert et al., “Commissioning of an Improved Superconducting RF Photo Injector at ELBE”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP061, pp. 881-884.
- H. Reeg, J. Glatz, N. Schneider, and H. Walter, “Machine Protection by Active Current-transmission Control at GSI-UNILAC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH014, pp. 1025-1027.
- Y. Fukui, R. C. Fernow, and J. C. Gallardo, “Muon Polarization in a Front-End Channel of a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH021, pp. 2126-2128.
- C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736.
- H. H?ñhnel, C. M. Kleffner, U. Ratzinger, M. Syha, and R. Tiede, “End to End Simulations and Error Studies of the FAIR Proton Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 885-888.
- M. Y. Huang, S. Wang, and S. Y. Xu, “Study on the Phase Space Painting Injection during the Beam Commissioning for CSNS”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 309-311.
- J. M. Jowett, “The tau-CHARM Factory Storage Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 368-371.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- C. Y. Wong, K. Fukushima, and S. M. Lund, “Self-Consistent PIC Modeling of Near Source Transport of FRIB”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 441-444.
- A. A. Garren and L. Smith, “Diagnosis and Correction of Beam Behaviour in an Isochronous Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63A03, pp. XX-XX.
- Q. S. Shu et al., “R & D in Progress to Overcome Field Emission in Superconducting Accelerator Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 491-494.
- F. E. Hannon, I. V. Bazarov, B. M. Dunham, Y. Li, and X. G. Liu, “Phase Space Tomography Using the Cornell ERL DC Gun”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC032, pp. 1119-1121.
- K. Fuchsberger et al., “JMAD - Integration of MADX into the JAVA World”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC006, pp. 465-467.
- A. Arnold et al., “Fabrication, Tuning, Treatment and Testing of Two 3.5 Cell Photo-Injector Cavities for the ELBE Linac”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO019, pp. 405-407.
- A. Peters, H. Reeg, P. Forck, W. Vodel, and R. Neubert, “Recent Improvements of a Cryogenic Current Comparator for nA Ion Beams with High Intensity Dynamics”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS05, pp. XX-XX.
- R. Zeng, P. Jonsson, and W. Schappert, “Application Investigation of High Precision Measurement for Basic Cavity Parameters at ESS”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP040, pp. 149-151.
- W. Wang et al., “2D Beam Profile Monitors at CPHS of Tsinghua University”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 298-301.
- E. Fol, J. M. Coello de Portugal, and R. Tom?ís, “Unsupervised Machine Learning for Detection of Faulty Beam Position Monitors”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2668-2671.
- H. Hayano et al., “Beam Tuning for Low Emittance in KEK-ATF Damping Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A12, pp. 483-485.
- P. N. Lu et al., “Transverse Emittance Measurement by Slit-scan Method for an SRF Photo Injector”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO44, pp. 322-324.
- G. D. Alton, J. Dellwo, R. F. Welton, and D. N. Smithe, “Computational Studies for an Advanced Design ECR Ion Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC12, pp. 1022-1024.
- Y. L. Jiang et al., “Design and Measurement of the X-Band Pulse Compressor for TTX”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4745-4748.
- E. N. Shaposhnikova et al., “Reference Measurements of the Longitudinal Impedance in the CERN SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP056, pp. 4667-4669.
- H. J. Kim and T. Sen, “Beam-Beam Compensation Using Electron Lens in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP032, pp. 2561-2563.
- E.-S. Kim, J. G. Hwang, and H. J. Kim, “Design Study for a Hard X-ray Generation by Using High Harmonic Generation Free Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA04, pp. 337-340.
- N. Inabe and T. Katayama, “Design of Double Storage Rings at MUSES”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP06H, pp. 897-899.
- M. A. Plum, “Beam Loss Mitigation in the Oak Ridge Spallation Neutron Source”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3C04, pp. 329-333.
- E. D. Courant, D. R. Douglas, A. A. Garren, and D. E. Johnson, “SSC Test Lattice Designs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1669-1672.
Back to search