Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216.
[n] K. Yoshimura et al., “Measurements of Proton Beam Extinction at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE013, pp. 984-986.
[n] K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2162-2164. doi:10.18429/JACoW-IPAC2014-WEPRO088
[n] K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
[n] J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621.
[n] P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3174-3176. doi:10.18429/JACoW-IPAC2014-THPRO121
[n] L. J. Mao et al., “Experimental Demonstration of Electron Cooling with Bunched Electron Beam”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 61-63. doi:10.18429/JACoW-COOL2017-TUP15
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3743-3746.
[n] D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
[n] P. Tenenbaum, L. Eriksson, T. Markiewicz, T. O. Raubenheimer, and A. Ringwall, “New Developments in the Next Linear Collider Beam Delivery System Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA32, pp. 3462-3464.
[n] M. Torikoshi et al., “Development of Superconducting Wiggler at NIRS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE002, pp. 2442-2444.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] S. M. Pattalwar et al., “Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP087, pp. 353-356.
[n] R. Kazimi, J. Hansknecht, M. Spata, and H. Wang, “Source and Extraction for Simultaneous Four-hall Beam Delivery System at CEBAF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI085, pp. 2896-2898.
[n] K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
[n] A. Andersson, “Phase Detection Electronics for CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC134, pp. 1338-1340.
[n] M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4178-4181. doi:10.18429/JACoW-IPAC2023-THPA094
[n] Y. Hao, “Computation Requirement Towards the Future Electron Ion Collider, eRHIC”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. XX-XX. doi:10.18429/JACoW-ICAP2015-MOBJI3
[n] D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
[n] C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1014-1018. doi:10.18429/JACoW-IPAC2016-TUYA01
[n] Y. J. Pei et al., “A Low Cost and High Efficient Facility for Removal of SO2 and NOx in the Flue Gas from Coal Fire Power Plant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA011, pp. 660-662.
[n] N. Sunilkumar, G. L. Gassner, J. A. Safranek, and Y. T. Yan, “Characterization of Slow Orbit Motion in the SPEAR3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE097, pp. 1215-1217.
[n] A. Sato et al., “Ramp;D Status of the High-intense Monochromatic Low-energy Muon Source: PRISM”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS056, pp. 2508-2510.
[n] M. A. Kempkes, M. P. J. Gaudreau, I. Roth, and R. P. Torti, “A High Voltage Hard Switch Modulator for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN113, pp. 2301-2303.
[n] T. H. Nicol et al., “SSR1 Cryomodule Design PXIE”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD005, pp. 2504-2506.
[n] H. Geng, W. B. Liu, W. Qiao, Q. Qin, Y. F. Sui, and Y. Yue, “Emittance Measurement with Multi-wire Scanners for BEPC-II Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME031, pp. 541-543.
[n] K. Fukami, K. Kobayashi, C. Mitsuda, T. Nakamura, and K. Soutome, “Beam-based Alignment for Injection Bump Magnets of the Storage Ring using Remote Tilt-control System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC143, pp. 3221-3223.
[n] R. Hipple and M. Berz, “Implementation of Benchmarks for Precision Tracking in Storage Rings”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 13-16. doi:10.18429/JACoW-ICAP2015-MODBC3
[n] M. Betz, O. R. Jones, T. Lefevre, and M. Wendt, “Upgrade of the LHC Schottky Monitor, Operational Experience and First Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 226-228. doi:10.18429/JACoW-IPAC2016-MOPMB060
[n] A. Liu, “Applications of an MPI Enhanced Simulated Annealing Algorithm on nuSTORM and 6D Muon Cooling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 568-570. doi:10.18429/JACoW-IPAC2015-MOPMA015
[n] S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
[n] D. E. Berkaev et al., “Beams Injection System for e+e- Collider VEPP-2000”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS037, pp. 622-624.
[n] Y. Li, W. X. Cheng, and L. Yang, “Using Big Data in NSLS-II Storage Ring Commissioning”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 6-8. doi:10.18429/JACoW-ICAP2015-MODBC1
[n] H.-S. Kang et al., “Current Status of PAL-XFEL Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB103, pp. 2074-2076.
[n] H. Safa et al., “Specific Resistance Measurement of a Single Grain Boundary in Pure Niobium”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP029, pp. 267-269.
[n] T. Saeki and H. Hayano, “Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 31-33. doi:10.18429/JACoW-IPAC2015-MOBB2
[n] K. Baptiste et al., “A Third-Harmonic RF Cavity for the Advanced Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20F, pp. 1808-1810.
[n] C. Y. Kuo et al., “Design and Measurement of the Transfer Line Magnets for the Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME036, pp. 3591-3593.
[n] X. Q. Ge et al., “Comparison of TiZrV Non-evaporable Getter Films Deposited by DC Magnetron Sputtering or Quantitative Deposition”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1283-1285. doi:10.18429/JACoW-IPAC2019-TUPMP021
[n] L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3181-3184. doi:10.18429/JACoW-IPAC2023-WEPL030
[n] V. D. Elvira, V. I. Balbekov, P. Lebrun, and P. Spentzouris, “GEANT4 Simulation and Theoretical Studies of a Helical Cooling Channel”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH083, pp. 3873-3875.
[n] J. M. Benavent, J. A. Carrasco, E. J. Dede, J. B. Ejea, V. Esteve, and G. Garcera, “A ZVT Converter for Superconducting Corrector Magnet Applications”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP122G, pp. 2367-2372.
[n] M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 879-881. doi:10.18429/JACoW-LINAC2018-THPO084
[n] H. Shimizu et al., “Fabrication and Evaluation of Low RRR Large Grain 1-Cell Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB030, pp. 1146-1148.
[n] F. Curbis, O. Karlberg, S. Thorin, and S. Werin, “Prospects for Longitudinal Phase-space Measurements at the MAX IV Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3665-3667. doi:10.18429/JACoW-IPAC2014-THPME170
[n] S. X. Peng et al., “Numerical Methods to the Space Charge Compensation (SCC) Effect of the LEBT Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO014, pp. 915-917.
[n] H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3159-3161. doi:10.18429/JACoW-IPAC2014-THPRO112
[n] A. Saa Hernandez and M. Aiba, “Investigation of the Injection Scheme for SLS 2.0”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1720-1723. doi:10.18429/JACoW-IPAC2015-TUPJE046
[n] D. Arbelaez, A. Madur, S. Marks, S. Prestemon, D. Schlueter, and H.-D. Nuhn, “Error Analysis for Hybrid Undulators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA24, pp. 387-390.
[n] D. Pellegrini, A. Latina, and D. Schulte, “PLACET2: A Novel Code for Beam Dynamics in Recirculating Machines”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 465-467. doi:10.18429/JACoW-IPAC2015-MOPJE068
[n] C. H. Kuo et al., “The Profile Measurement of Synchrotron Radiation Monitor in NSRRC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP581, pp. XX-XX.
[n] W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
[n] M. D'yachkov, R. Baartman, and F. W. Jones, “Multiturn Simulation of Coherent Betatron Resonance with Space Charge”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB004, pp. 267-269.
[n] A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153.
[n] Z. Liu et al., “NSRL Phase 2 Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1213-1216.
- K. Yoshimura et al., “Measurements of Proton Beam Extinction at J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE013, pp. 984-986.
- K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2162-2164.
- K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
- J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621.
- P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3174-3176.
- L. J. Mao et al., “Experimental Demonstration of Electron Cooling with Bunched Electron Beam”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 61-63.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3743-3746.
- D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
- P. Tenenbaum, L. Eriksson, T. Markiewicz, T. O. Raubenheimer, and A. Ringwall, “New Developments in the Next Linear Collider Beam Delivery System Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA32, pp. 3462-3464.
- M. Torikoshi et al., “Development of Superconducting Wiggler at NIRS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE002, pp. 2442-2444.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- S. M. Pattalwar et al., “Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP087, pp. 353-356.
- R. Kazimi, J. Hansknecht, M. Spata, and H. Wang, “Source and Extraction for Simultaneous Four-hall Beam Delivery System at CEBAF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI085, pp. 2896-2898.
- K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
- A. Andersson, “Phase Detection Electronics for CLIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC134, pp. 1338-1340.
- M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA094, pp. 4178-4181.
- Y. Hao, “Computation Requirement Towards the Future Electron Ion Collider, eRHIC”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. XX-XX.
- D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
- C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1014-1018.
- Y. J. Pei et al., “A Low Cost and High Efficient Facility for Removal of SO2 and NOx in the Flue Gas from Coal Fire Power Plant”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA011, pp. 660-662.
- N. Sunilkumar, G. L. Gassner, J. A. Safranek, and Y. T. Yan, “Characterization of Slow Orbit Motion in the SPEAR3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE097, pp. 1215-1217.
- A. Sato et al., “Ramp;D Status of the High-intense Monochromatic Low-energy Muon Source: PRISM”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS056, pp. 2508-2510.
- M. A. Kempkes, M. P. J. Gaudreau, I. Roth, and R. P. Torti, “A High Voltage Hard Switch Modulator for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN113, pp. 2301-2303.
- T. H. Nicol et al., “SSR1 Cryomodule Design PXIE”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD005, pp. 2504-2506.
- H. Geng, W. B. Liu, W. Qiao, Q. Qin, Y. F. Sui, and Y. Yue, “Emittance Measurement with Multi-wire Scanners for BEPC-II Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME031, pp. 541-543.
- K. Fukami, K. Kobayashi, C. Mitsuda, T. Nakamura, and K. Soutome, “Beam-based Alignment for Injection Bump Magnets of the Storage Ring using Remote Tilt-control System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC143, pp. 3221-3223.
- R. Hipple and M. Berz, “Implementation of Benchmarks for Precision Tracking in Storage Rings”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 13-16.
- M. Betz, O. R. Jones, T. Lefevre, and M. Wendt, “Upgrade of the LHC Schottky Monitor, Operational Experience and First Results”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 226-228.
- A. Liu, “Applications of an MPI Enhanced Simulated Annealing Algorithm on nuSTORM and 6D Muon Cooling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 568-570.
- S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
- D. E. Berkaev et al., “Beams Injection System for e+e- Collider VEPP-2000”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS037, pp. 622-624.
- Y. Li, W. X. Cheng, and L. Yang, “Using Big Data in NSLS-II Storage Ring Commissioning”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 6-8.
- H.-S. Kang et al., “Current Status of PAL-XFEL Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEODB103, pp. 2074-2076.
- H. Safa et al., “Specific Resistance Measurement of a Single Grain Boundary in Pure Niobium”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP029, pp. 267-269.
- T. Saeki and H. Hayano, “Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 31-33.
- K. Baptiste et al., “A Third-Harmonic RF Cavity for the Advanced Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP20F, pp. 1808-1810.
- C. Y. Kuo et al., “Design and Measurement of the Transfer Line Magnets for the Taiwan Photon Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME036, pp. 3591-3593.
- X. Q. Ge et al., “Comparison of TiZrV Non-evaporable Getter Films Deposited by DC Magnetron Sputtering or Quantitative Deposition”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1283-1285.
- L. Carver et al., “Beam loading simulations in PyAT for the ESRF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL030, pp. 3181-3184.
- V. D. Elvira, V. I. Balbekov, P. Lebrun, and P. Spentzouris, “GEANT4 Simulation and Theoretical Studies of a Helical Cooling Channel”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH083, pp. 3873-3875.
- J. M. Benavent, J. A. Carrasco, E. J. Dede, J. B. Ejea, V. Esteve, and G. Garcera, “A ZVT Converter for Superconducting Corrector Magnet Applications”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP122G, pp. 2367-2372.
- M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 879-881.
- H. Shimizu et al., “Fabrication and Evaluation of Low RRR Large Grain 1-Cell Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB030, pp. 1146-1148.
- F. Curbis, O. Karlberg, S. Thorin, and S. Werin, “Prospects for Longitudinal Phase-space Measurements at the MAX IV Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3665-3667.
- S. X. Peng et al., “Numerical Methods to the Space Charge Compensation (SCC) Effect of the LEBT Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO014, pp. 915-917.
- H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3159-3161.
- A. Saa Hernandez and M. Aiba, “Investigation of the Injection Scheme for SLS 2.0”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1720-1723.
- D. Arbelaez, A. Madur, S. Marks, S. Prestemon, D. Schlueter, and H.-D. Nuhn, “Error Analysis for Hybrid Undulators”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA24, pp. 387-390.
- D. Pellegrini, A. Latina, and D. Schulte, “PLACET2: A Novel Code for Beam Dynamics in Recirculating Machines”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 465-467.
- C. H. Kuo et al., “The Profile Measurement of Synchrotron Radiation Monitor in NSRRC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP581, pp. XX-XX.
- W. W. Lee and L. C. Teng, “Beam Bunch Length Matching at Transition Crossing with Space-Charge Forces”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1057-1062.
- M. D'yachkov, R. Baartman, and F. W. Jones, “Multiturn Simulation of Coherent Betatron Resonance with Space Charge”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB004, pp. 267-269.
- A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153.
- Z. Liu et al., “NSRL Phase 2 Project”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6A002, pp. 636-640.
Back to search