Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. D. Joo, I. Hwang, C. Kim, and B.-J. Lee, “Design of SLED System with Dual Side-wall Coupling Irises and Biplanar Power Splitter for PAL XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC059, pp. 3425-3427.
[n] L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1003-1006. doi:10.18429/JACoW-IPAC2017-MOPVA060
[n] A. Asami et al., “Progress of Positron Generator at KEK”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-20, pp. 577-579.
[n] R. A. Early and J. K. Cobb, “TOSCA Calculations and Measurements for the SLAC SLC Damping Ring Dipole Manget”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3654-3657.
[n] F. Marhauser, R. Rodriguez, and Z. Li, “A Novel Design of a High Brightness Superconducting RF Photoinjector Gun Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD078, pp. 1581-1583.
[n] S. A. Blankenburg, J. K. Cobb, and J. J. Muray, “Secondary Emission from Thin Metal Foils Bombarded with 70 - MeV Electrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 935-943.
[n] M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1011-1014. doi:10.18429/JACoW-IPAC2017-MOPVA062
[n] L. R. Lucas and D. R. Walz, “A Precision Actuator and Shaft Encoder for a High Radiation Environment and Other Beam Component Developments at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 792-795.
[n] S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
[n] R. A. Early, J. K. Cobb, and J. E. Oijala, “Design Calculations and Measurements of a Dipole Magnet with Permendur Pole Pieces”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 351-354.
[n] G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 138-141.
[n] M. E. Herniter and W. D. Getty, “Development of High-Current-Density Lab 6 Thermionic Emitters for a Space-Charge-Limited Electron Gun”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 292-295.
[n] S. Pirani et al., “Investigation of HOM Frequency Shifts Induced by Mechanical Tolerances”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1071-1073. doi:10.18429/JACoW-IPAC2017-MOPVA091
[n] J. H. Han, I. Hwang, and H.-S. Kang, “Microbunching Instability Study for the PAL-XFEL Linac”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD42, pp. 125-128.
[n] G. Cheng, E. Daly, and M. Wiseman, “Pressure Safety of JLAB 12GeV Upgrade Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO055, pp. 718-722.
[n] Y. Nakamura, “STATUS REPORT ON JAERI-AVF CYCLOTRON SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P23, pp. XX-XX.
[n] Q. S. Shu et al., “SQUID-based Nondestructive Testing Instrument of Dished Niobium Sheets for SRF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS055, pp. 2469-2471.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. D. Joo, I. Hwang, C. Kim, and B.-J. Lee, “Design of SLED System with Dual Side-wall Coupling Irises and Biplanar Power Splitter for PAL XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC059, pp. 3425-3427.
- L. Monaco et al., “Fabrication and Treatment of the ESS Medium Beta Prototype Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1003-1006.
- A. Asami et al., “Progress of Positron Generator at KEK”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-20, pp. 577-579.
- R. A. Early and J. K. Cobb, “TOSCA Calculations and Measurements for the SLAC SLC Damping Ring Dipole Manget”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3654-3657.
- F. Marhauser, R. Rodriguez, and Z. Li, “A Novel Design of a High Brightness Superconducting RF Photoinjector Gun Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD078, pp. 1581-1583.
- S. A. Blankenburg, J. K. Cobb, and J. J. Muray, “Secondary Emission from Thin Metal Foils Bombarded with 70 - MeV Electrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 935-943.
- M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1011-1014.
- L. R. Lucas and D. R. Walz, “A Precision Actuator and Shaft Encoder for a High Radiation Environment and Other Beam Component Developments at SLAC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 792-795.
- S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
- R. A. Early, J. K. Cobb, and J. E. Oijala, “Design Calculations and Measurements of a Dipole Magnet with Permendur Pole Pieces”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 351-354.
- G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 138-141.
- M. E. Herniter and W. D. Getty, “Development of High-Current-Density Lab 6 Thermionic Emitters for a Space-Charge-Limited Electron Gun”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 292-295.
- S. Pirani et al., “Investigation of HOM Frequency Shifts Induced by Mechanical Tolerances”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1071-1073.
- J. H. Han, I. Hwang, and H.-S. Kang, “Microbunching Instability Study for the PAL-XFEL Linac”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD42, pp. 125-128.
- G. Cheng, E. Daly, and M. Wiseman, “Pressure Safety of JLAB 12GeV Upgrade Cryomodule”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO055, pp. 718-722.
- Y. Nakamura, “STATUS REPORT ON JAERI-AVF CYCLOTRON SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P23, pp. XX-XX.
- Q. S. Shu et al., “SQUID-based Nondestructive Testing Instrument of Dished Niobium Sheets for SRF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS055, pp. 2469-2471.
Back to search