Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. L. Rubin, D. Sagan, and J. P. Shanks, “CesrTA Layout and Optics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP103, pp. 2751-2753.
[n] L. Monaco et al., “Dark Current Investigation of TTF and PITZ RF Guns”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS051, pp. 2493-2495.
[n] S. Schreiber, “The Tesla Test Facility Linac - Status Report”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP14F, pp. 475-477.
[n] E. Wang et al., “Progress on Diamond Amplified Photo Cathode”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP155, pp. 382-384.
[n] C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3283-3286.
[n] R. Gebel, R. Brings, and O. Felden And R, “Operation Of The Injector Cyclotron Julic For The Cooler Synchrotron Cosy/J??lich”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 122-124.
[n] C. E. Reece et al., “Performance of the CEBAF prototype cryomodule renascence”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP32, pp. XX-XX.
[n] K. Noda et al., “S-ring Project at NIRS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE099, pp. 605-607.
[n] D. Zangrando, S. Di Mitri, B. Diviacco, C. Knapic, and L. Tosi, “Commissioning of Two New Insertion Devices at ELETTRA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG017, pp. 1050-1052.
[n] G. R. White, “A Design for 10 GeV, High Peak-Current, Tightly Focused Electron Beams at FACET-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 807-809. doi:10.18429/JACoW-IPAC2017-MOPIK115
[n] A. C. Kabel and P. Emma, “Peak Current Optimization for LCLS Bunch Compressor 2”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF081, pp. 506-508.
[n] Y. Luo et al., “Study of Crabbed Collision in eRHIC With a Combination of Strong-Strong and Weak-Strong Simulations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 105-107. doi:10.18429/JACoW-IPAC2018-MOPMF012
[n] K. Crook, T. V. Huang, G. Nelson, and V. Price, “Operational Aspects of the SLAC Main Control Center”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 510-514.
[n] T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Vacuum System for UVSOR Storage Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1672-1675.
[n] T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Beam Properties of UVSOR Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2550-2553.
[n] T. Gahl et al., “The Modular Control Concept of the Neutron Scattering Experiments at the European Spallation Source ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 529-532. doi:10.18429/JACoW-ICALEPCS2015-TUB3O03
[n] A. Mochihashi et al., “Observation of Vertical Instability in UVSOR Electron Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI047, pp. 1939-1941.
[n] Y. Han, Z. Q. Feng, W. Chen, B. G. Yin, and G. Y. Zhao, “Harmonic Measurement for KEK B-Factory Steering Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP161, pp. 3345-3347.
[n] M. Katoh et al., “UVSOR Upgrade Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI017, pp. 697-699.
[n] T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Present Status of UVSOR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3409-3412.
[n] A. Gasper, A. Goehl, T. Habermann, G. Mueller, C. Piel, and T. Weis, “An S-Band Test Cavity for a Field Emission Based RF-Gun”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04E, pp. 1471-1473.
[n] H. B. Hong et al., “The Performance of Double-grid O-18 Water Target for FDG Production”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH173, pp. 2337-2339.
[n] C. E. Chen, J. X. Fang, Z. Y. Guo, W. G. Li, X. Q. Yan, and Y. Wu, “Exploring the Feasibility of a Separated Function RFQ Structure”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE101, pp. 879-881.
[n] C. C. Liang et al., “Characterization of the THz Radiation-Based Bunch Length Measurement System for the NSRRC Photoinjector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4080-4082. doi:10.18429/JACoW-IPAC2017-THPAB149
[n] K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
[n] W. Bartmann et al., “Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 858-861. doi:10.18429/JACoW-IPAC2018-TUPAF060
[n] L. Liu et al., “Advances in Beam Orbit Stability at the LNLS Electron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH005, pp. 1924-1926.
[n] K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 68-70. doi:10.18429/JACoW-LINAC2016-MOOP12
[n] J. Butler et al., “Precision Synchrotron Radiation Detectors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1544-1547.
[n] D. K. Olsen et al., “Radioactive Beams with the HHIRF Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2604-2607.
[n] A. Bosotti et al., “The Wire Position Monitor (WPM) as a Sensor for Mechanical Vibration for the TTF Cryomodules”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP43, pp. 558-562.
[n] J. H. Hong et al., “New RF-Gun Design for The PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD43, pp. 129-131.
[n] D. E. Kim et al., “Status of PAL-XFEL Undulator System”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD27, pp. 595-597.
For LaTeX
Use Complete Form
For BibTeX
References
- D. L. Rubin, D. Sagan, and J. P. Shanks, “CesrTA Layout and Optics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP103, pp. 2751-2753.
- L. Monaco et al., “Dark Current Investigation of TTF and PITZ RF Guns”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS051, pp. 2493-2495.
- S. Schreiber, “The Tesla Test Facility Linac - Status Report”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP14F, pp. 475-477.
- E. Wang et al., “Progress on Diamond Amplified Photo Cathode”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP155, pp. 382-384.
- C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3283-3286.
- R. Gebel, R. Brings, and O. Felden And R, “Operation Of The Injector Cyclotron Julic For The Cooler Synchrotron Cosy/J??lich”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 122-124.
- C. E. Reece et al., “Performance of the CEBAF prototype cryomodule renascence”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP32, pp. XX-XX.
- K. Noda et al., “S-ring Project at NIRS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE099, pp. 605-607.
- D. Zangrando, S. Di Mitri, B. Diviacco, C. Knapic, and L. Tosi, “Commissioning of Two New Insertion Devices at ELETTRA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG017, pp. 1050-1052.
- G. R. White, “A Design for 10 GeV, High Peak-Current, Tightly Focused Electron Beams at FACET-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 807-809.
- A. C. Kabel and P. Emma, “Peak Current Optimization for LCLS Bunch Compressor 2”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF081, pp. 506-508.
- Y. Luo et al., “Study of Crabbed Collision in eRHIC With a Combination of Strong-Strong and Weak-Strong Simulations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 105-107.
- K. Crook, T. V. Huang, G. Nelson, and V. Price, “Operational Aspects of the SLAC Main Control Center”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 510-514.
- T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Vacuum System for UVSOR Storage Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1672-1675.
- T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Beam Properties of UVSOR Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2550-2553.
- T. Gahl et al., “The Modular Control Concept of the Neutron Scattering Experiments at the European Spallation Source ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 529-532.
- A. Mochihashi et al., “Observation of Vertical Instability in UVSOR Electron Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI047, pp. 1939-1941.
- Y. Han, Z. Q. Feng, W. Chen, B. G. Yin, and G. Y. Zhao, “Harmonic Measurement for KEK B-Factory Steering Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP161, pp. 3345-3347.
- M. Katoh et al., “UVSOR Upgrade Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI017, pp. 697-699.
- T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Present Status of UVSOR”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3409-3412.
- A. Gasper, A. Goehl, T. Habermann, G. Mueller, C. Piel, and T. Weis, “An S-Band Test Cavity for a Field Emission Based RF-Gun”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04E, pp. 1471-1473.
- H. B. Hong et al., “The Performance of Double-grid O-18 Water Target for FDG Production”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH173, pp. 2337-2339.
- C. E. Chen, J. X. Fang, Z. Y. Guo, W. G. Li, X. Q. Yan, and Y. Wu, “Exploring the Feasibility of a Separated Function RFQ Structure”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE101, pp. 879-881.
- C. C. Liang et al., “Characterization of the THz Radiation-Based Bunch Length Measurement System for the NSRRC Photoinjector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4080-4082.
- K. H. Gil, H. J. Choi, J. Y. Huang, J. H. Lim, and C. W. Bark, “Automation of Microbeam Focusing for X-Ray Micro-Experiments at the 4B Beamline of Pohang Light Source-II”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC058, pp. 703-706.
- W. Bartmann et al., “Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 858-861.
- L. Liu et al., “Advances in Beam Orbit Stability at the LNLS Electron Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH005, pp. 1924-1926.
- K. E. Nichols, B. E. Carlsten, and A. Malyzhenkov, “Klynac Design Simulations and Experimental Setup”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 68-70.
- J. Butler et al., “Precision Synchrotron Radiation Detectors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1544-1547.
- D. K. Olsen et al., “Radioactive Beams with the HHIRF Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2604-2607.
- A. Bosotti et al., “The Wire Position Monitor (WPM) as a Sensor for Mechanical Vibration for the TTF Cryomodules”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP43, pp. 558-562.
- J. H. Hong et al., “New RF-Gun Design for The PAL-XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD43, pp. 129-131.
- D. E. Kim et al., “Status of PAL-XFEL Undulator System”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD27, pp. 595-597.
Back to search