Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. A. Komkov, O. L. Maslennikov, V. F. Petrov, V. L. Smirnov, and B. A. Sokolov, “Input Coupler for Superconducting Accelerator Structure”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1407-1410.
[n] A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1510-1513.
[n] Q. Q. Song et al., “A Real-Time Controller for Rapid Energy Degrading of the CYCIAE-230 Cyclotron Beam Production System”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO001, pp. 47-50. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO001
[n] A. Mostacci, F. Caspers, F. Ruggiero, and L. Palumbo, “Image Currents in Azimuthally Inhomogeneous Metallic Beam Pipes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH074, pp. 1835-1837.
[n] E. Syresin, A. Tuzikov, and N. O. Zagibin, “Influence of Injection Kicker Post-pulses on Storage of Ion Stack in NICA Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 93-95. doi:10.18429/JACoW-IPAC2021-MOPAB017
[n] Y. Saito et al., “Scenario of Beam-based Alignment with New BPM System for Future Beam Commissioning of 1.3-MW Operation at the J-PARC Main Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4608, unpublished.
[n] O. Yavas, H.-H. Braun, R. Corsini, and S. Sultansoy, “CLIC Drive Beam and LHC Based FEL-Nucleus Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT097, pp. 4320-4322.
[n] M. D. Woodley and P. J. Emma, “Measurement and Correction of Cross-Plane Coupling in Transport Lines”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC19, pp. 196-198.
[n] E. Todesco, “Analysis of Resonant Structures of a 4D Model of a Nonlinear Magnetic Lattice through Resonant Normal Forms”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 914-917.
[n] L.-H. Yu et al., “Short Rayleigh Range Free Electron Laser Amplifiers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP044, pp. XX-XX.
[n] T. Y. Lee, B. Y. Chen, T. W. Hsu, B. Y. Huang, C. H. Kuo, and W. Y. Lin, “A Remote-Controlled Robot-Car in the TPS Tunnel”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3435-3438. doi:10.18429/JACoW-IPAC2019-THYYPLS3
[n] Z. G. Li et al., “The High Quality Water Cooling System for a 100 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 205-207. doi:10.18429/JACoW-Cyclotrons2016-TUP16
[n] A. Bazzani, D. Bortolotti, M. Giovannozzi, G. Servizi, E. Todesco, and G. Turchetti, “GIOTTO: An Interactive Program for the Analysis of 2D Area Preserving Mappings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 923-926.
[n] W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
[n] O. Capatina, K. Artoos, G. Huet, and B. Nicquevert, “Mechanical Dynamic Load of the LHC Arc Cryo-magnets during the LHC Installation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT014, pp. 1849-1851.
[n] G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
[n] M. F. Vorogushin, “ELECTROPHYSICAL SYSTEMS BASED on CHARGED PARTICLE ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper MOAI02, pp. XX-XX.
[n] M. Lalande et al., “A versatile beam splitting system for simultaneous delivery of three beams to industrial applications at the GANIL accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3001, unpublished.
[n] G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
[n] M. Sitko et al., “Towards Implementation of Laser Engineered Surface Structures for Electron Cloud Mitigation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1220-1223. doi:10.18429/JACoW-IPAC2018-TUZGBE3
[n] M. F. Vorogushin, V. A. Shishov, S. F. Naumov, A. V. Sidorov, O. M. Anouchin, and S. V. Kanaev, “MAIN TENDENCIES OF DEVELOPMENT OF RUSSIAN ONCOLOGY RADIOTHERAPY SYSTEM EFARAD”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper FRJO04, pp. XX-XX.
[n] S. V. Sinyatkin, V. A. Kiselev, E. B. Levichev, V. V. Parkhomchuk, V. B. Reva, and V. A. Vostrikov, “Lattice Study for the Carbon Ion Synchrotron forTherapy with Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC123, pp. 355-357.
[n] N. O. Strelnikov, E. Gluskin, I. Vasserman, and J. Z. Xu, “Performance of the Full-Length Vertical Polarizing Undulator Prototype for LCLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 946-949. doi:10.18429/JACoW-NAPAC2016-WEPOB23
[n] R. Than et al., “Cryogenic Vertical Test Facility for the SRF Cavities at BNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP224, pp. 1238-1240.
[n] C. Wang, X. D. Jiang, J. Z. Wang, S. M. Wei, N. G. Zeng, and T. J. Zhang, “The Redesign, Installation of Light II-A Pulsed Power Generator and its Potential Application”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP067, pp. 1702-1704.
[n] L. E. Medina Medrano, J. Barranco, T. Pieloni, X. Buffat, and R. Tomas, “Assessment of Linear and Non-Linear Optics Errors due to Beam-Beam with Multipoles for the High Luminosity LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3557-3560. doi:10.18429/JACoW-IPAC2018-THPAK135
[n] W. Bartmann et al., “Beam Loss Control for the Unstripped Ions from the PS2 Charge Exchange Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP039, pp. 3790-3792.
[n] J. Wei, S. X. Fang, and S. Fu, “China Spallation Neutron Source Accelerators: Design, Research, and Development”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH136, pp. 366-368.
[n] G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 589-592.
[n] R. B. Deng, W. L. Chen, H. W. Du, Z. B. Yan, and M. Zhang, “Mechanical Design of Shift Driving System for DEPU at SSRF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA026, pp. 2187-2189.
[n] P. Baxevanis and R. D. Ruth, “Theoretical Analysis of a Laser Undulator-Based High Gain FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO04, pp. 27-31.
[n] R. Maas and Y. Y. Wu, “Optical Design of the Electron Pulse Stretcher Facility AmPs”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1488-1491.
[n] T. Sakai et al., “Research and development of coherent terahertz sources at LEBRA linac, Nihon University”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 611-614. doi:10.18429/JACoW-LINAC2024-THAA006
[n] K. Yamamoto et al., “Beam Instrumentation at the 1 MW Proton Beam of J-PARC RCS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO2AB03, pp. 278-282.
[n] M. M. Rihaoui, W. Gai, P. Piot, and J. G. Power, “Limiting Effects in the Transverse-to-Longitudinal Emittance Exchange Technique for Low Energy Relativistic Electron Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP087, pp. 3907-3909.
For LaTeX
Use Complete Form
For BibTeX
References
- A. A. Komkov, O. L. Maslennikov, V. F. Petrov, V. L. Smirnov, and B. A. Sokolov, “Input Coupler for Superconducting Accelerator Structure”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1407-1410.
- A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1510-1513.
- Q. Q. Song et al., “A Real-Time Controller for Rapid Energy Degrading of the CYCIAE-230 Cyclotron Beam Production System”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO001, pp. 47-50.
- A. Mostacci, F. Caspers, F. Ruggiero, and L. Palumbo, “Image Currents in Azimuthally Inhomogeneous Metallic Beam Pipes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH074, pp. 1835-1837.
- E. Syresin, A. Tuzikov, and N. O. Zagibin, “Influence of Injection Kicker Post-pulses on Storage of Ion Stack in NICA Collider”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 93-95.
- Y. Saito et al., “Scenario of Beam-based Alignment with New BPM System for Future Beam Commissioning of 1.3-MW Operation at the J-PARC Main Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4608, this conference.
- O. Yavas, H.-H. Braun, R. Corsini, and S. Sultansoy, “CLIC Drive Beam and LHC Based FEL-Nucleus Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT097, pp. 4320-4322.
- M. D. Woodley and P. J. Emma, “Measurement and Correction of Cross-Plane Coupling in Transport Lines”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC19, pp. 196-198.
- E. Todesco, “Analysis of Resonant Structures of a 4D Model of a Nonlinear Magnetic Lattice through Resonant Normal Forms”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 914-917.
- L.-H. Yu et al., “Short Rayleigh Range Free Electron Laser Amplifiers”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP044, pp. XX-XX.
- T. Y. Lee, B. Y. Chen, T. W. Hsu, B. Y. Huang, C. H. Kuo, and W. Y. Lin, “A Remote-Controlled Robot-Car in the TPS Tunnel”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3435-3438.
- Z. G. Li et al., “The High Quality Water Cooling System for a 100 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 205-207.
- A. Bazzani, D. Bortolotti, M. Giovannozzi, G. Servizi, E. Todesco, and G. Turchetti, “GIOTTO: An Interactive Program for the Analysis of 2D Area Preserving Mappings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 923-926.
- W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
- O. Capatina, K. Artoos, G. Huet, and B. Nicquevert, “Mechanical Dynamic Load of the LHC Arc Cryo-magnets during the LHC Installation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT014, pp. 1849-1851.
- G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
- M. F. Vorogushin, “ELECTROPHYSICAL SYSTEMS BASED on CHARGED PARTICLE ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper MOAI02, pp. XX-XX.
- M. Lalande et al., “A versatile beam splitting system for simultaneous delivery of three beams to industrial applications at the GANIL accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3001, this conference.
- G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-B02, pp. 194-197.
- M. Sitko et al., “Towards Implementation of Laser Engineered Surface Structures for Electron Cloud Mitigation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1220-1223.
- M. F. Vorogushin, V. A. Shishov, S. F. Naumov, A. V. Sidorov, O. M. Anouchin, and S. V. Kanaev, “MAIN TENDENCIES OF DEVELOPMENT OF RUSSIAN ONCOLOGY RADIOTHERAPY SYSTEM EFARAD”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper FRJO04, pp. XX-XX.
- S. V. Sinyatkin, V. A. Kiselev, E. B. Levichev, V. V. Parkhomchuk, V. B. Reva, and V. A. Vostrikov, “Lattice Study for the Carbon Ion Synchrotron forTherapy with Electron Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC123, pp. 355-357.
- N. O. Strelnikov, E. Gluskin, I. Vasserman, and J. Z. Xu, “Performance of the Full-Length Vertical Polarizing Undulator Prototype for LCLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 946-949.
- R. Than et al., “Cryogenic Vertical Test Facility for the SRF Cavities at BNL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP224, pp. 1238-1240.
- C. Wang, X. D. Jiang, J. Z. Wang, S. M. Wei, N. G. Zeng, and T. J. Zhang, “The Redesign, Installation of Light II-A Pulsed Power Generator and its Potential Application”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP067, pp. 1702-1704.
- L. E. Medina Medrano, J. Barranco, T. Pieloni, X. Buffat, and R. Tomas, “Assessment of Linear and Non-Linear Optics Errors due to Beam-Beam with Multipoles for the High Luminosity LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3557-3560.
- W. Bartmann et al., “Beam Loss Control for the Unstripped Ions from the PS2 Charge Exchange Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP039, pp. 3790-3792.
- J. Wei, S. X. Fang, and S. Fu, “China Spallation Neutron Source Accelerators: Design, Research, and Development”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH136, pp. 366-368.
- G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 589-592.
- R. B. Deng, W. L. Chen, H. W. Du, Z. B. Yan, and M. Zhang, “Mechanical Design of Shift Driving System for DEPU at SSRF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA026, pp. 2187-2189.
- P. Baxevanis and R. D. Ruth, “Theoretical Analysis of a Laser Undulator-Based High Gain FEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO04, pp. 27-31.
- R. Maas and Y. Y. Wu, “Optical Design of the Electron Pulse Stretcher Facility AmPs”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1488-1491.
- T. Sakai et al., “Research and development of coherent terahertz sources at LEBRA linac, Nihon University”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 611-614.
- K. Yamamoto et al., “Beam Instrumentation at the 1 MW Proton Beam of J-PARC RCS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO2AB03, pp. 278-282.
- M. M. Rihaoui, W. Gai, P. Piot, and J. G. Power, “Limiting Effects in the Transverse-to-Longitudinal Emittance Exchange Technique for Low Energy Relativistic Electron Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP087, pp. 3907-3909.
Back to search