JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113. 
[n]	A. Fornara et al., “First proton crabbing at the LHC via head-on beam-beam interaction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2317-2320. doi:10.18429/JACoW-IPAC2025-WEPS036
[n]	M. Tobiyama et al., “Beam Commissioning of SuperKEKB Rings at Phase-2”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 6-12. doi:10.18429/JACoW-IBIC2018-MOOB01
[n]	N. Stapley et al., “CERNÔÇÖs SRF Test Stand for Cavity Performance Measurements”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1082-1086. doi:10.18429/JACoW-SRF2019-THP078
[n]	W. Buczak, M. Buttner, F. Ehm, P. Jurcso, and M. Mitev, “DIAMON2 ÔÇô Improved Monitoring of CERN's Accelerator Controls Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBA03, pp. 1415-1418. 
[n]	A. Anikeichik et al., “Injectors for High-Intensity Linear Accelerator of INR Moscow Meson Factory”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-54, pp. 660-662. 
[n]	D. Filippetto et al., “APEX Present Experimental Results”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 730-732. doi:10.18429/JACoW-IPAC2014-MOPRI055
[n]	M. Vogt, B. Faatz, J. Feldhaus, K. Honkavaara, S. Schreiber, and R. Treusch, “Status of the Free Electron Laser User Facility FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 938-940. doi:10.18429/JACoW-IPAC2014-TUOCA02
[n]	J. Wei et al., “An Anti-symmetric Lattice for High Intensity Rapid-cycling Synchrotrons”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH137, pp. 369-371. 
[n]	J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA037, pp. 750-752. 
[n]	G. Kruk, O. Da Silva Alves, L. Molinari, and E. Roux, “Best Practices for Efficient Development of JavaFX Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1078-1083. doi:10.18429/JACoW-ICALEPCS2017-THAPL02
[n]	C. Gaspar, “An Overview of the LHC Experiments' Control Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOAAB01, pp. 982-986. 
[n]	A. A. Gorzawski et al., “Observation of Fast Losses in the LHC Operation in 2017”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 740-743. doi:10.18429/JACoW-IPAC2018-TUPAF029
[n]	S. Pfeiffer et al., “Virtual Cavity Probe Generation using Calibrated Forward and Reflected Signals”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 200-202. doi:10.18429/JACoW-IPAC2015-MOPWA040
[n]	C. Engblom et al., “Overview of Some Feedback & Control Systems at Synchrotron Soleil”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 132-136. doi:10.18429/JACoW-PCAPAC2016-FRFMPLIO03
[n]	H. Timko, T. Argyropoulos, I. Karpov, and E. N. Shaposhnikova, “Beam Instabilities After Injection to the LHC”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 163-167. doi:10.18429/JACoW-HB2018-TUP1WA03
[n]	R. Tomas, M. Aiba, A. Franchi, and U. Iriso, “Review of Linear Optics Measurements and Corrections in Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 20-26. doi:10.18429/JACoW-IPAC2016-MOYCA01
[n]	A. Kanareykin, W. Gai, C.-J. Jing, A. L. Kustov, J. G. Power, and P. Schoessow, “Beam Breakup Instabilities in Dielectric Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS094, pp. 4300-4302. 
[n]	N. Magnin et al., “External Post-Operational Checks for the LHC Beam Dumping System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU023, pp. 1111-1114. 
[n]	I. Karpov and P. Baudrenghien, “Beam Loading and Longitudinal Stability Evaluation for the FCC-ee Rings”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 266-271. doi:10.18429/JACoW-HB2018-WEP2PO003
[n]	K. P. Przygoda, H. Schlarb, Ch. Schmidt, P. Echevarria, and R. Rybaniec, “MicroTCA.4 based Single Cavity Regulation including Piezo Controls”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3152-3154. doi:10.18429/JACoW-IPAC2016-THOAA03
[n]	M. Venturini et al., “Beam Dynamics Studies of a High-repetition Rate Linac Driver for a 4th-generation Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP074, pp. 1771-1773. 
[n]	R. Bruce et al., “Collimator Layouts for HL-LHC in the Experimental Insertions”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2064-2067. doi:10.18429/JACoW-IPAC2015-TUPTY028
[n]	H. Niewiadomski, H. Burkhardt, and F. J. Nemes, “LHC Optics Determination with Proton Tracks Measured in the Roman Pots Detectors of the TOTEM Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC008, pp. 136-138. 
[n]	M. F. Gomez De La Cruz et al., “The Automatic Quench Analysis Software for the High Luminosity LHC Magnets Evaluation at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 357-360. doi:10.18429/JACoW-ICALEPCS2017-TUMPA08
[n]	T. Pugnat, L. Bonaventura, B. Dalena, R. De Maria, V. K. B. Olsen, and A. Simona, “Study of Fringe Fields Effects from Final Focus Quadrupoles on Beam Based Measured Quantities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 90-93. doi:10.18429/JACoW-IPAC2019-MOPGW012
[n]	L. Soby, D. Belohrad, M. Krupa, P. Odier, J. F. Bergoz, and F. Stulle, “A New Integrating Current Transformer for the LHC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF06, pp. 540-543. 
[n]	P. Schoessow et al., “Beam Breakup in Dielectric Wakefield Accelerating Structures: Modeling and Experiments”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP111, pp. 1689-1691. 
[n]	C. F. Papadopoulos et al., “Determination of True RMS Emittance from OTR Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP053, pp. 4072-4074. 
[n]	A. Intermite, M. Putignano, and C. P. Welsch, “Feasibility Study of an Optical Fibre Sensor for Beam Loss Detection Based on a SPAD Array”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB27, pp. 228-230. 
[n]	M. Vogt, J. Feldhaus, K. Honkavaara, J. Roensch-Schulenburg, S. Schreiber, and R. Treusch, “The Superconducting Soft X-ray Free-Electron Laser User Facility FLASH”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 729-731. doi:10.18429/JACoW-IPAC2016-MOPOW010
[n]	S. Aguilera, H. Hofmann, and P. Odier, “Comparative Study of Magnetic Properties for CERN Beam Current Transformers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 127-130. doi:10.18429/JACoW-IBIC2016-MOPG37
[n]	L. F. Li and C. H. Wang, “A Web Based Realtime Monitor on EPICS Data”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN014, pp. 121-123. 
[n]	O. A. Anderson and L. Soroka, “Emittance Growth in Intense Mismatched Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1043-1046. 
[n]	J. M. D. Kowalczyk, M. R. Hadmack, and J. Madey, “Laser Cooling to Counteract Back-Bombardment Heating in Microwave Thermionic Electron Guns”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO44, pp. 79-81. 
[n]	A. H. Lumpkin, M. R. Hadmack, J. M. D. Kowalczyk, J. Madey, and E. B. Szarmes, “Initial Streak Camera Measurements of the S-band Linac Beam for the University of Hawaii FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO45, pp. 325-328. 
[n]	M. E. Conde et al., “The Argonne Wakefield Accelerator Facility (AWA): Upgrades and Future Experiments”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP055, pp. 2923-2925. 
[n]	J. Wei et al., “Injection Choice for Spallation Neutron Source Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH050, pp. 2560-2562. 
[n]	Y.-M. Abiven et al., “SOLEIL and SYMETRIE Company Collaborate to Build Tango Ready in-Vacuum Diffractometer”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 380-384. doi:10.18429/JACoW-ICALEPCS2017-TUPHA007
[n]	A. Denker, “APPLICATIONS OF HIGH-ENERGY IONS IN MATERIALS SCIENCE”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19B3, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search