Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Eppley, N. M. Kroll, Z. Li, R. H. Miller, C. Nantista, and S. Tantawi, “A Four-Port Launcher for a Multi-moded DLDS Power Distribution System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP30F, pp. 1779-1781.
[n] E. Bekhtenev, S. Khrushchev, N. Mezentsev, E. Miginsky, V. Shkaruba, and V. Tsukanov, “The main test results of the 3.5 Tesla 49-pole superconducting wiggler for DLS”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MONP06, pp. XX-XX.
[n] R. M. Zwaska et al., “Status of the NuMI Neutrino Beam at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAKI01, pp. 691-691.
[n] P. Vannerem, C. Gaspar, B. Jost, and N. Neufeld, “Distributed Control and Monitoring of High-Level Trigger Processes on the LHCb On-Line Farm.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE115, pp. XX-XX.
[n] P. Marchand et al., “Operation of the SOLEIL RF system”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP53, pp. XX-XX.
[n] M. A. Allen and P. B. Wilson, “Linac-Type RF Structures for High Energy Storage Rings”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper J04, pp. 279-282.
[n] M. Sullivan et al., “Beam-Beam Collisions at the PEP-II B FACTORY”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEAR6, pp. 296-298.
[n] B. Giaccone, P. Berrutti, and M. Martinello, “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR07, pp. XX-XX.
[n] S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 896-898. doi:10.18429/JACoW-IPAC2014-MOPRI116
[n] R. Goergen, R. Klein, P. Kuske, R. Thornagel, and G. Ulm, “High Precision Determination of the Energy at BESSY II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A09, pp. 1771-1773.
[n] F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 777-781. doi:10.18429/JACoW-ICALEPCS2015-WEPGF037
[n] A. K. Gupta, P. V. Bhagwat, and R. K. Choudhury, “Developmental Activities at BARC-TIFR Pelletron Accelerator Facility”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-03, pp. 36-40.
[n] W. C. Sellyey, J. D. Gilpatrick, P. S. Marroquin, and M. E. Gruchalla, “Experience with Photomultiplier Based Beam Loss Monitors (PMBLM) at the Low Energy Demonstration Accelerator (LEDA)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH042, pp. 1315-1317.
[n] P. Goslawski et al., “BESSY III Status Report and Lattice Design Process”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1417-1419. doi:10.18429/JACoW-IPAC2022-TUPOMS010
[n] A. J. Della Penna, “ADC Clocking Formats and Matching Networks”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP281, pp. 639-641.
[n] R. Santiago Kern et al., “Cryogenic Performance of the HNOSS Test Facility at Uppsala University”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB026, pp. 612-616.
[n] J. Wu, Y. M. Peng, and Y. Zhang, “Multiobjective Optimization of Dynamic Aperture at Off-axis Injection Lattice of HEPS”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 43-46. doi:10.18429/JACoW-SAP2017-MOPH08
[n] H. O. Moser et al., “Synchrotron Radiation Research at Singapore Synchrotron Light Source”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM102, pp. XX-XX.
[n] R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
[n] K. Nakajima et al., “A Proof of Principle Experiment of Laser Wakefield Accelerator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-14, pp. 332-334.
[n] L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
[n] I. Romera and M. Audrain, “Pre-Operation, During Operation and Post-Operational Verification of Protection Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU016, pp. 1090-1092.
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
[n] D. Tsifakis, P. Linardakis, and N. R. Lobanov, “Development of a Beam Pulse Monitor for the Heavy Ion Accelerator Facility”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 27-29. doi:10.18429/JACoW-IBIC2015-MOPB001
[n] R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
[n] L. O. Dallin and D. M. Skopik, “Canadian Light Source Proposal”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4B005, pp. 716-718.
[n] A. Halavanau, Y. Ding, C. E. Mayes, P. Piot, and S. Baturin, “Hollow Electron Beams in a Photoinjector”, in Proc. IPAC'20, Caen, France, May 2020, pp. 49. doi:10.18429/JACoW-IPAC2020-WEVIR06
[n] W. Leemans, S. Chattopadhyay, M. Conde, R. Govil, M. de Loos, and B. van der Geer, “Plasma Production for the 50 MeV Plasma Lens Experiment at LBL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 831-834.
[n] K. Morita et al., “Photoemission Properties of LaB6 and CeB6 Under Various Temperature and Incident Photon Energy Conditions”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2088-2090. doi:10.18429/JACoW-IPAC2016-WEOAB03
[n] Z. A. Conway et al., “Cryomodule Designs for Superconducting Half-Wave Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB068, pp. 627-629.
[n] M. Dehn, K. Aulenbacher, J. Diefenbach, F. Fichtner, R. Herbertz, and W. Klag, “Testing a Digital Beam Position Stabilization for the P2-experiment at MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 888-890. doi:10.18429/JACoW-IPAC2015-MOPHA044
[n] R. A. Rimmer, “Determination of Failure Mechanisms of RF Cavity Aperture Windows”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 214-217.
[n] Z. Liu, X. Deng, and L. Yan, “Unifying coherent synchrotron radiation wakefield and classical radiation reaction”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 825-827. doi:10.18429/JACoW-IPAC2024-MOPS47
[n] W. B. Mori et al., “Laser Wakefields at UCLA and LLNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 564-567.
[n] J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3679-3681. doi:10.18429/JACoW-IPAC2019-THPGW043
[n] D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
[n] C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1094-1097.
[n] J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
[n] T. Overton, B. Higuera Gonzalez, G. Xia, T. Pacey, and Y. Saveliev, “Passive longitudinal bunch diagnostics with a dielectric Wakefield streaker at CLARA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2214-2217. doi:10.18429/JACoW-IPAC2024-WEPG15
[n] Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 155-157.
[n] W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890.
[n] D. Khan and T. O. Raubenheimer, “Cancellation of Coherent Synchrotron Radiation Kicks at LCLS”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 296-299. doi:10.18429/JACoW-FEL2017-TUP027
[n] L. M. A. Ferreira, N. S. Chritin, R. Ferreira, and V. Gerbet, “Surface Polishing Facility for Superconducting RF Cavities at CERN”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 387. doi:10.18429/JACoW-SRF2021-TUPFAV004
[n] J. E. Spencer and H. A. Thiessen, “Some High Resolution Techniques for Use with Negative Ion Beams”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P21, pp. 415-421.
[n] Y. Chiba et al., “Ferrite Test Cavity For Muses”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP25G, pp. 1823-1825.
[n] V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
[n] S. Roling et al., “Optical Design and Time-dependent Wavefront Propagation Simulation for a Hard X-Ray Split- and delay-unit for the European XFEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO56, pp. 627-631.
[n] A. Luccio and M. Puglisi, “Beam - and Drive - Controlled Amplifier for the Isabelle Accelerating System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2893-2895.
[n] R. Lipa et al., “APS Fast Orbit Feedback System Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO03, pp. 1301-1303.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Eppley, N. M. Kroll, Z. Li, R. H. Miller, C. Nantista, and S. Tantawi, “A Four-Port Launcher for a Multi-moded DLDS Power Distribution System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP30F, pp. 1779-1781.
- E. Bekhtenev, S. Khrushchev, N. Mezentsev, E. Miginsky, V. Shkaruba, and V. Tsukanov, “The main test results of the 3.5 Tesla 49-pole superconducting wiggler for DLS”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MONP06, pp. XX-XX.
- R. M. Zwaska et al., “Status of the NuMI Neutrino Beam at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAKI01, pp. 691-691.
- P. Vannerem, C. Gaspar, B. Jost, and N. Neufeld, “Distributed Control and Monitoring of High-Level Trigger Processes on the LHCb On-Line Farm.”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE115, pp. XX-XX.
- P. Marchand et al., “Operation of the SOLEIL RF system”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP53, pp. XX-XX.
- M. A. Allen and P. B. Wilson, “Linac-Type RF Structures for High Energy Storage Rings”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper J04, pp. 279-282.
- M. Sullivan et al., “Beam-Beam Collisions at the PEP-II B FACTORY”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEAR6, pp. 296-298.
- B. Giaccone, P. Berrutti, and M. Martinello, “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR07, pp. XX-XX.
- S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 896-898.
- R. Goergen, R. Klein, P. Kuske, R. Thornagel, and G. Ulm, “High Precision Determination of the Energy at BESSY II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A09, pp. 1771-1773.
- F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 777-781.
- A. K. Gupta, P. V. Bhagwat, and R. K. Choudhury, “Developmental Activities at BARC-TIFR Pelletron Accelerator Facility”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-03, pp. 36-40.
- W. C. Sellyey, J. D. Gilpatrick, P. S. Marroquin, and M. E. Gruchalla, “Experience with Photomultiplier Based Beam Loss Monitors (PMBLM) at the Low Energy Demonstration Accelerator (LEDA)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH042, pp. 1315-1317.
- P. Goslawski et al., “BESSY III Status Report and Lattice Design Process”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1417-1419.
- A. J. Della Penna, “ADC Clocking Formats and Matching Networks”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP281, pp. 639-641.
- R. Santiago Kern et al., “Cryogenic Performance of the HNOSS Test Facility at Uppsala University”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB026, pp. 612-616.
- J. Wu, Y. M. Peng, and Y. Zhang, “Multiobjective Optimization of Dynamic Aperture at Off-axis Injection Lattice of HEPS”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 43-46.
- H. O. Moser et al., “Synchrotron Radiation Research at Singapore Synchrotron Light Source”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM102, pp. XX-XX.
- R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695.
- K. Nakajima et al., “A Proof of Principle Experiment of Laser Wakefield Accelerator”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-14, pp. 332-334.
- L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745.
- I. Romera and M. Audrain, “Pre-Operation, During Operation and Post-Operational Verification of Protection Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU016, pp. 1090-1092.
- F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
- D. Tsifakis, P. Linardakis, and N. R. Lobanov, “Development of a Beam Pulse Monitor for the Heavy Ion Accelerator Facility”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 27-29.
- R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
- L. O. Dallin and D. M. Skopik, “Canadian Light Source Proposal”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4B005, pp. 716-718.
- A. Halavanau, Y. Ding, C. E. Mayes, P. Piot, and S. Baturin, “Hollow Electron Beams in a Photoinjector”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 49.
- W. Leemans, S. Chattopadhyay, M. Conde, R. Govil, M. de Loos, and B. van der Geer, “Plasma Production for the 50 MeV Plasma Lens Experiment at LBL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 831-834.
- K. Morita et al., “Photoemission Properties of LaB6 and CeB6 Under Various Temperature and Incident Photon Energy Conditions”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2088-2090.
- Z. A. Conway et al., “Cryomodule Designs for Superconducting Half-Wave Resonators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB068, pp. 627-629.
- M. Dehn, K. Aulenbacher, J. Diefenbach, F. Fichtner, R. Herbertz, and W. Klag, “Testing a Digital Beam Position Stabilization for the P2-experiment at MESA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 888-890.
- R. A. Rimmer, “Determination of Failure Mechanisms of RF Cavity Aperture Windows”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 214-217.
- Z. Liu, X. Deng, and L. Yan, “Unifying coherent synchrotron radiation wakefield and classical radiation reaction”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS47, pp. 825-827.
- W. B. Mori et al., “Laser Wakefields at UCLA and LLNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 564-567.
- J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3679-3681.
- D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
- C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1094-1097.
- J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
- T. Overton, B. Higuera Gonzalez, G. Xia, T. Pacey, and Y. Saveliev, “Passive longitudinal bunch diagnostics with a dielectric Wakefield streaker at CLARA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG15, pp. 2214-2217.
- Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 155-157.
- W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1887-1890.
- D. Khan and T. O. Raubenheimer, “Cancellation of Coherent Synchrotron Radiation Kicks at LCLS”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 296-299.
- L. M. A. Ferreira, N. S. Chritin, R. Ferreira, and V. Gerbet, “Surface Polishing Facility for Superconducting RF Cavities at CERN”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 387.
- J. E. Spencer and H. A. Thiessen, “Some High Resolution Techniques for Use with Negative Ion Beams”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P21, pp. 415-421.
- Y. Chiba et al., “Ferrite Test Cavity For Muses”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP25G, pp. 1823-1825.
- V. I. Pershin et al., “Metal-Vapor Vacuum-Arc Ion Source with An Additional Anode”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH434, pp. 677-679.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
- S. Roling et al., “Optical Design and Time-dependent Wavefront Propagation Simulation for a Hard X-Ray Split- and delay-unit for the European XFEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO56, pp. 627-631.
- A. Luccio and M. Puglisi, “Beam - and Drive - Controlled Amplifier for the Isabelle Accelerating System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2893-2895.
- R. Lipa et al., “APS Fast Orbit Feedback System Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO03, pp. 1301-1303.
Back to search