Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 665-668. doi:10.18429/JACoW-IBIC2016-WEPG19
[n] M. Boscolo, M. E. Biagini, E. Paoloni, P. Raimondi, and M. K. Sullivan, “Touschek Background and Lifetime Studies for the SuperB Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP060, pp. 3844-3846.
[n] G. Bisoffi et al., “Results on INFN-LNL Niobium RFQ Resonators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO07, pp. 535-538.
[n] K. Fukami et al., “Novel iron lamination for fast kicker magnets with high flux density”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2631-2634. doi:10.18429/JACoW-IPAC2023-WEODC2
[n] M. Inoue, A. Yamamoto, S. Shiroya, H. Moriyama, H. Unesaki, and T. Misawa and Y, “PRESENT STATUS OF NEUTRON FACTORY PROJECT AT KURRI”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUAM05, pp. XX-XX.
[n] V. Tzoganis, A. V. Aleksandrov, and R. W. Dickson, “Present Status and Upgrades of the SNS Ion Beam Bunch Shape Monitors”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 968-970. doi:10.18429/JACoW-NAPAC2019-THZBB5
[n] K.Akai, H.Fukuma, T.Ieiri, T.Kawakubo, E.Kikutani, M.Tobiyama, “BEAM DIAGNOSTICS BY GATING A SINGLE BUNCH AT KEKB”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP044, pp. XX-XX.
[n] M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
[n] J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
[n] R. W. Freyman, “A 40-Kilovolt, 125-Ampere Hard Tube Modulator for Accelerator Service”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 205-208.
[n] S. R. Koscielniak and G. H. Rees, “Survey of Techniques for Longitudinal Emittance Blow-up in the Kaon Factory Collector Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1741-1744.
[n] Y. Gao et al., “Exploratory Data Analysis on the RHIC Cryogenics System Compressor Dataset”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 907-912. doi:10.18429/JACoW-ICALEPCS2023-TUPDP138
[n] L. K. Nguyen, “The Pointing Stabilization Algorithm for the Coherent Electron Cooling Laser Transport at RHIC”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 913-916. doi:10.18429/JACoW-ICALEPCS2023-TUPDP139
[n] T. Nakamura, K. Kobayashi, and Z. R. Zhou, “Bunch by Bunch Feedback by RF Direct Sampling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC128, pp. 3287-3289.
[n] A. Seryi, “Ground Motion Models for Future Linear Colliders”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A13, pp. 501-503.
[n] H. Wei and C. Chen, “Charged-Particle Dynamics in an Adiabatic Thermal Beam Equilibrium”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE097, pp. 4749-4751.
[n] H. Witte, J. H. Cobb, K. J. Peach, S. L. Sheehy, and T. Yokoi, “PAMELA Magnets - Design and Performance”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP073, pp. 301-303.
[n] R. Bonifacio et al., “The ELFA Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 340-343.
[n] C. H. Rivetta, K. J. Bertsche, A. Drago, and M. K. Sullivan, “Longitudinal Bunch Position Control for the Super-B Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP050, pp. 2607-2609.
[n] K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
[n] T. Nakamura et al., “Single-loop Two-dimensional Transverse Feedback for Photon Factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH092, pp. 3006-3008.
[n] G. H. Rees, “Outline Linac and Ring Designs for Potential ISIS Upgrades”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP086, pp. 4978-4980.
[n] S.Karnaev, V.Kiselev, E.Levichev, A.Naumenkov, S.Nikitin, I.Protopopov, D.Shatilov, E.Simonov, A.Skrinsky, G.Tumaikin, “LOW ENERGY LUMINOSITY AT VEPP-4M COLLIDER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAU04, pp. XX-XX.
[n] Y. L. Huang, Y. He, H. Jia, Y. S. Qin, Z. J. Wang, and Z. L. Zhang, “Deflecting Cavities for Proton Beam Spreader in CiADS Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 445. doi:10.18429/JACoW-SRF2021-TUPCAV004
[n] M. Turenne, F. Hunte, R. P. Johnson, J. Schwartz, and H. Song, “Roebel Cable for High-field Low-loss Accelerator Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB057, pp. 397-399.
[n] H. S. Suh et al., “Design, Fabrication, and Performance Tests of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP033, pp. 90-92.
[n] M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
[n] A. Topaloudis et al., “A Generic Real-Time Software in C++ for Digital Camera-Based Acquisition Systems at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1499-1504. doi:10.18429/JACoW-ICALEPCS2023-THPDP069
For LaTeX
Use Complete Form
For BibTeX
References
- S. Seletskiy et al., “Conceptual Design of LEReC Fast Machine Protection System”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 665-668.
- M. Boscolo, M. E. Biagini, E. Paoloni, P. Raimondi, and M. K. Sullivan, “Touschek Background and Lifetime Studies for the SuperB Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP060, pp. 3844-3846.
- G. Bisoffi et al., “Results on INFN-LNL Niobium RFQ Resonators”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO07, pp. 535-538.
- K. Fukami et al., “Novel iron lamination for fast kicker magnets with high flux density”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEODC2, pp. 2631-2634.
- M. Inoue, A. Yamamoto, S. Shiroya, H. Moriyama, H. Unesaki, and T. Misawa and Y, “PRESENT STATUS OF NEUTRON FACTORY PROJECT AT KURRI”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUAM05, pp. XX-XX.
- V. Tzoganis, A. V. Aleksandrov, and R. W. Dickson, “Present Status and Upgrades of the SNS Ion Beam Bunch Shape Monitors”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 968-970.
- K.Akai, H.Fukuma, T.Ieiri, T.Kawakubo, E.Kikutani, M.Tobiyama, “BEAM DIAGNOSTICS BY GATING A SINGLE BUNCH AT KEKB”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP044, pp. XX-XX.
- M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
- J. A. Vasquez, A. Andrighetto, G. P. Prete, and M. Bertocco, “New Control System for the SPES Off-line Laboratory at LNL-INFN using EPICS IOCs based on the Raspberry Pi”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC053, pp. 687-690.
- R. W. Freyman, “A 40-Kilovolt, 125-Ampere Hard Tube Modulator for Accelerator Service”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 205-208.
- S. R. Koscielniak and G. H. Rees, “Survey of Techniques for Longitudinal Emittance Blow-up in the Kaon Factory Collector Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1741-1744.
- Y. Gao et al., “Exploratory Data Analysis on the RHIC Cryogenics System Compressor Dataset”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP138, pp. 907-912.
- L. K. Nguyen, “The Pointing Stabilization Algorithm for the Coherent Electron Cooling Laser Transport at RHIC”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP139, pp. 913-916.
- T. Nakamura, K. Kobayashi, and Z. R. Zhou, “Bunch by Bunch Feedback by RF Direct Sampling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC128, pp. 3287-3289.
- A. Seryi, “Ground Motion Models for Future Linear Colliders”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A13, pp. 501-503.
- H. Wei and C. Chen, “Charged-Particle Dynamics in an Adiabatic Thermal Beam Equilibrium”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE097, pp. 4749-4751.
- H. Witte, J. H. Cobb, K. J. Peach, S. L. Sheehy, and T. Yokoi, “PAMELA Magnets - Design and Performance”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP073, pp. 301-303.
- R. Bonifacio et al., “The ELFA Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 340-343.
- C. H. Rivetta, K. J. Bertsche, A. Drago, and M. K. Sullivan, “Longitudinal Bunch Position Control for the Super-B Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP050, pp. 2607-2609.
- K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
- T. Nakamura et al., “Single-loop Two-dimensional Transverse Feedback for Photon Factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH092, pp. 3006-3008.
- G. H. Rees, “Outline Linac and Ring Designs for Potential ISIS Upgrades”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP086, pp. 4978-4980.
- S.Karnaev, V.Kiselev, E.Levichev, A.Naumenkov, S.Nikitin, I.Protopopov, D.Shatilov, E.Simonov, A.Skrinsky, G.Tumaikin, “LOW ENERGY LUMINOSITY AT VEPP-4M COLLIDER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAU04, pp. XX-XX.
- Y. L. Huang, Y. He, H. Jia, Y. S. Qin, Z. J. Wang, and Z. L. Zhang, “Deflecting Cavities for Proton Beam Spreader in CiADS Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 445.
- M. Turenne, F. Hunte, R. P. Johnson, J. Schwartz, and H. Song, “Roebel Cable for High-field Low-loss Accelerator Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB057, pp. 397-399.
- H. S. Suh et al., “Design, Fabrication, and Performance Tests of Dipole and Quadrupole Magnets for PAL-XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP033, pp. 90-92.
- M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
- A. Topaloudis et al., “A Generic Real-Time Software in C++ for Digital Camera-Based Acquisition Systems at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP069, pp. 1499-1504.
Back to search