Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
[n] D. A. Dohan, K. Fong, and V. Pacak, “Control of RF Leakage in the TRIUMF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-05, pp. 345-348.
[n] J. W. Staples and B. A. Ludewigt, “Modeling and System Specifications for an Integrated 3-D Proton Treatment Delivery System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1759-1762.
[n] S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX.
[n] Y. U. Jeong, H. J. Cha, G. M. Kazakevitch, B. C. Lee, and S. H. Park, “THz Imaging by a Wide-band Compact FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOS03, pp. XX-XX.
[n] S. V. Kuzikov, S. P. Antipov, O. A. Ivanov, A. A. Vikharev, and A. L. Vikharev, “Novel Concepts of a High-Brightness Photoinjector RF Gun”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 397-400. doi:10.18429/JACoW-FEL2017-WEA04
[n] H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
[n] S. Vrcic, J. Engelbrecht, and T. Juerges, “SKA control system in 2025”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 910-915. doi:10.18429/JACoW-ICALEPCS2025-WEMG002
[n] N. R. Stevenson and W. Z. Gelbart, “External High Current Targetry for Radioisotope Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-11, pp. 196-197.
[n] D. L. Bruhwiler et al., “Rapid Browser-Based Visualization of Large Neutron Scattering Datasets”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2494-2497. doi:10.18429/JACoW-IPAC2021-TUPAB413
[n] J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
[n] G. F. Burdzik, “Field Processing Methods Developed for a Separated-Sector Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3910-3913.
[n] Z. Yang, X. Liu, X. Lu, C. Tang, and L. Yan, “A high-peak-power, phase-stabilized laser system for quasi-steady-state microbunching”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM097, unpublished.
[n] G. Franchetti et al., “Long Term Simulations of the Space Charge and Beam Loss in the SIS18”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B04, pp. 615-618.
[n] N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
[n] H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1469-1471. doi:10.18429/JACoW-IPAC2017-TUPAB064
[n] D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2921-2924. doi:10.18429/JACoW-IPAC2022-THPOTK062
[n] W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 551-556.
[n] R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
[n] J. J. Ramirez, “Design of the Jupiter Accelerator for Large X-ray Yields”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE05, pp. 1198-1200.
[n] C. U. Choi, M. Chung, G. Hahn, J. Lee, T.-Y. Lee, and S. Shin, “Simulation Code Development for High-Power Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 68-70. doi:10.18429/JACoW-Cyclotrons2016-MOP09
[n] J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4352-4354. doi:10.18429/JACoW-IPAC2021-THPAB282
[n] C. E. Houghton, C. Bloomer, and L. Bobb, “Development of Non-Invasive Calibration Software for Front End X-Ray Beam Position Monitors at Diamond Light Source, Oxfordshire, UK”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 59-61. doi:10.18429/JACoW-IBIC2022-MOP15
[n] M. Q. Barton, “Application of an On-Line Computer to Accelerator Studies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 335-336.
[n] M. Hosaka, K. Chen, T. He, and W. Xu, “Comparison of BBA methods for commissioning of fourth generation light sources”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1369-1371. doi:10.18429/JACoW-IPAC2024-TUPG54
[n] H. Wang and P. R. China, “Cell Design and Test for an Induction Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP129, pp. 3263-3265.
[n] F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
[n] Y. Bao, G. Hansen, and D. V. Neuffer, “Phase Rotation of Muon Beams for Producing Intense Low-energy Muon Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1556-1558. doi:10.18429/JACoW-IPAC2016-TUPMY008
[n] M. A. Shapiro, G. Shvets, J. R. Sirigiri, and R. J. Temkin, “3D Metallic Lattices for Accelerator Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE023, pp. 1838-1840.
[n] M. W. McGee, P. G. Hurh, and K. J. Bertsche, “Design and Fabrication of Achromatic Bend for Medium Energy Electron Cooling at Fermilab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P031, pp. 3283-3285.
[n] L. Yan and Z. Liu, “Coherent synchrotron radiation instability in steady-state microbunching ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS004, unpublished.
[n] A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4187-4189. doi:10.18429/JACoW-IPAC2019-THPTS037
[n] T. Perron, L. Farvacque, and E. Plouviez, “Vertcal Effective Impedance Mapping of the ESRF Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT085, pp. 2053-2055.
[n] O. Gr, “Beam Induced Multipacting”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
[n] B. G. Sun et al., “Bunch Length Measurement and its Lengthening in HLS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA135, pp. 2184-2186.
[n] Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
[n] M. Kuntzsch, A. Penirschke, B. Scheible, K. Zenker, R. Yadav, and U. Lehnert, “Beam Diagnostic for the DALI accelerator”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPCO11, unpublished.
[n] K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
[n] D. H. An et al., “Beam Simulation of SQQ Injection System in KIRAMS-30 Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH080, pp. 2107-2109.
[n] K. J. Kugler, W. Paul, and U. Trinks, “A Superconducting Storage Ring for Very Slow Neutrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3152-3155.
[n] A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, “Qt Based Control System Software for Low Energy Accelerator Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD33, pp. 206-207.
[n] M. Reiser, D. Kehne, and H. Rudd, “Numerical and Experimental Studies of Halo Formation Due to Mismatch in a Space-Charge Dominated Electron Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 65-68.
[n] A. Valek, S. Biri, I. Sz??cs, and J. V?ímosi, “Test Measurements of the Debrecen ECRIS Subsystems”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-08, pp. 397-400.
[n] T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
[n] H. W. Zhao et al., “Commissioning of IMP 14.5 GHz ECR Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-06, pp. 417-419.
For LaTeX
Use Complete Form
For BibTeX
References
- E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
- D. A. Dohan, K. Fong, and V. Pacak, “Control of RF Leakage in the TRIUMF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-05, pp. 345-348.
- J. W. Staples and B. A. Ludewigt, “Modeling and System Specifications for an Integrated 3-D Proton Treatment Delivery System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1759-1762.
- S. V. Khruschev et al., “9 Tesla Superbend for BESSY-2”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14005, pp. XX-XX.
- Y. U. Jeong, H. J. Cha, G. M. Kazakevitch, B. C. Lee, and S. H. Park, “THz Imaging by a Wide-band Compact FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOS03, pp. XX-XX.
- S. V. Kuzikov, S. P. Antipov, O. A. Ivanov, A. A. Vikharev, and A. L. Vikharev, “Novel Concepts of a High-Brightness Photoinjector RF Gun”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 397-400.
- H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
- S. Vrcic, J. Engelbrecht, and T. Juerges, “SKA control system in 2025”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 910-915.
- N. R. Stevenson and W. Z. Gelbart, “External High Current Targetry for Radioisotope Production”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IV-11, pp. 196-197.
- D. L. Bruhwiler et al., “Rapid Browser-Based Visualization of Large Neutron Scattering Datasets”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2494-2497.
- J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
- G. F. Burdzik, “Field Processing Methods Developed for a Separated-Sector Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3910-3913.
- Z. Yang, X. Liu, X. Lu, C. Tang, and L. Yan, “A high-peak-power, phase-stabilized laser system for quasi-steady-state microbunching”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM097, unpublished.
- G. Franchetti et al., “Long Term Simulations of the Space Charge and Beam Loss in the SIS18”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2B04, pp. 615-618.
- N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
- H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1469-1471.
- D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2921-2924.
- W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 551-556.
- R. T. Acharya, D. W. Doll, K. Redler, and T. Van Hagan, “An Ogive Shaped Carbon-Carbon Composite Beam Stop”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA136, pp. 1393-1395.
- J. J. Ramirez, “Design of the Jupiter Accelerator for Large X-ray Yields”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE05, pp. 1198-1200.
- C. U. Choi, M. Chung, G. Hahn, J. Lee, T.-Y. Lee, and S. Shin, “Simulation Code Development for High-Power Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 68-70.
- J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4352-4354.
- C. E. Houghton, C. Bloomer, and L. Bobb, “Development of Non-Invasive Calibration Software for Front End X-Ray Beam Position Monitors at Diamond Light Source, Oxfordshire, UK”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 59-61.
- M. Q. Barton, “Application of an On-Line Computer to Accelerator Studies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 335-336.
- M. Hosaka, K. Chen, T. He, and W. Xu, “Comparison of BBA methods for commissioning of fourth generation light sources”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG54, pp. 1369-1371.
- H. Wang and P. R. China, “Cell Design and Test for an Induction Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP129, pp. 3263-3265.
- F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
- Y. Bao, G. Hansen, and D. V. Neuffer, “Phase Rotation of Muon Beams for Producing Intense Low-energy Muon Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1556-1558.
- M. A. Shapiro, G. Shvets, J. R. Sirigiri, and R. J. Temkin, “3D Metallic Lattices for Accelerator Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE023, pp. 1838-1840.
- M. W. McGee, P. G. Hurh, and K. J. Bertsche, “Design and Fabrication of Achromatic Bend for Medium Energy Electron Cooling at Fermilab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P031, pp. 3283-3285.
- L. Yan and Z. Liu, “Coherent synchrotron radiation instability in steady-state microbunching ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS004, unpublished.
- A. X. Wang et al., “The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4187-4189.
- T. Perron, L. Farvacque, and E. Plouviez, “Vertcal Effective Impedance Mapping of the ESRF Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT085, pp. 2053-2055.
- O. Gr, “Beam Induced Multipacting”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
- B. G. Sun et al., “Bunch Length Measurement and its Lengthening in HLS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA135, pp. 2184-2186.
- Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
- M. Kuntzsch, A. Penirschke, B. Scheible, K. Zenker, R. Yadav, and U. Lehnert, “Beam Diagnostic for the DALI accelerator”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper WEPCO11, unpublished.
- K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
- D. H. An et al., “Beam Simulation of SQQ Injection System in KIRAMS-30 Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH080, pp. 2107-2109.
- K. J. Kugler, W. Paul, and U. Trinks, “A Superconducting Storage Ring for Very Slow Neutrons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3152-3155.
- A. Basu, S. K. Gupta, S. B. V. Nagraju, P. Singh, and S. Singh, “Qt Based Control System Software for Low Energy Accelerator Facility”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD33, pp. 206-207.
- M. Reiser, D. Kehne, and H. Rudd, “Numerical and Experimental Studies of Halo Formation Due to Mismatch in a Space-Charge Dominated Electron Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 65-68.
- A. Valek, S. Biri, I. Sz??cs, and J. V?ímosi, “Test Measurements of the Debrecen ECRIS Subsystems”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-08, pp. 397-400.
- T. Katsouleas, T. C. Chiou, W. B. Mori, J. S. Wurtele, and G. Shvets, “Studies of Intense Laser Propagation in Channels for Extended Length Plasma Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB08, pp. 773-775.
- H. W. Zhao et al., “Commissioning of IMP 14.5 GHz ECR Ion Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-06, pp. 417-419.
Back to search