Favourites
For Word
[n] P. Bricault et al., “Target and Mass Separator Concept for the RIB Facility”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-04, pp. 347-351.
[n] O. Singh and G. Decker, “Operational Experience with X-ray Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB008, pp. 539-543.
[n] G. C. Pappas, A. R. Donaldson, and D. Williams, “The PEP-II Injection Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W011, pp. 390-392.
[n] A. Valishev and V. D. Shiltsev, “Electron Lens for Beam-Beam Compensation at LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP034, pp. 2567-2569.
[n] C. Reece, B. Almeida, T. Powers, and J. Susta, “A Closed Cycle Cryogenic System for Testing Superconducting RF Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2325-2328.
[n] W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 425-427. doi:10.18429/JACoW-NAPAC2016-TUPOA71
[n] H. Deruyter et al., “Damped Accelerator Structures for Future Linear e_ Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 156-159.
[n] V. D. Shiltsev, “High Luminosity Operation, Beam-Beam Effects and Their Compensation in TEVATRON”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUXG02, pp. 951-955.
[n] L. Yang, D. Robin, F. Sannibale, C. Steier, and W. Wan, “Multiobjective Light Source Lattice Optimization”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP071, pp. 3365-3367.
[n] K.-H. Park et al., “The Design of Low Noise Magnet Power Supply”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 136-138. doi:10.18429/JACoW-FEL2015-MOP048
[n] H.-G. Lee et al., “Technical Overview of Bunch Compressor System for PAL XFEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 490-492. doi:10.18429/JACoW-FEL2015-TUP055
[n] O. A. Waldner et al., “Linear Resonant Accelerators for Industrial Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2613-2616.
[n] R. M. Jones et al., “Analysis and Application of Microwave Radiation from the Damping Manifolds of the SLAC Damped Detuned Structures (DDS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W016, pp. 554-556.
[n] F. Lenkszus, G. Decker, R. Laird, R. Lill, and O. Singh, “New APS Storage Ring BPM Timing System Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH001, pp. 767-769.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Bricault et al., “Target and Mass Separator Concept for the RIB Facility”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-04, pp. 347-351.
- O. Singh and G. Decker, “Operational Experience with X-ray Beam Position Monitors at the Advanced Photon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB008, pp. 539-543.
- G. C. Pappas, A. R. Donaldson, and D. Williams, “The PEP-II Injection Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W011, pp. 390-392.
- A. Valishev and V. D. Shiltsev, “Electron Lens for Beam-Beam Compensation at LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP034, pp. 2567-2569.
- C. Reece, B. Almeida, T. Powers, and J. Susta, “A Closed Cycle Cryogenic System for Testing Superconducting RF Cavities”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2325-2328.
- W. X. Cheng, B. Bacha, Y. Li, O. Singh, and Y. Tian, “Beam Stability During Top Off Operation at NSLS-II Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 425-427.
- H. Deruyter et al., “Damped Accelerator Structures for Future Linear e_ Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 156-159.
- V. D. Shiltsev, “High Luminosity Operation, Beam-Beam Effects and Their Compensation in TEVATRON”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUXG02, pp. 951-955.
- L. Yang, D. Robin, F. Sannibale, C. Steier, and W. Wan, “Multiobjective Light Source Lattice Optimization”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP071, pp. 3365-3367.
- K.-H. Park et al., “The Design of Low Noise Magnet Power Supply”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 136-138.
- H.-G. Lee et al., “Technical Overview of Bunch Compressor System for PAL XFEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 490-492.
- O. A. Waldner et al., “Linear Resonant Accelerators for Industrial Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2613-2616.
- R. M. Jones et al., “Analysis and Application of Microwave Radiation from the Damping Manifolds of the SLAC Damped Detuned Structures (DDS)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W016, pp. 554-556.
- F. Lenkszus, G. Decker, R. Laird, R. Lill, and O. Singh, “New APS Storage Ring BPM Timing System Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH001, pp. 767-769.
Back to search