JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151. 
[n]	D. Wang et al., “The CEPC lattice design with combined dipole magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 315-318. doi:10.18429/JACoW-IPAC2018-MOPMF079
[n]	M. Abliz et al., “Septum Magnet Design for APS-U”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1231-1233. doi:10.18429/JACoW-NAPAC2016-THPOA63
[n]	M. Allen et al., “High Power Testing of PEP-II RF Cavity Windows”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP087L, pp. 2059-2061. 
[n]	A. Rhyder, G. R. Jackson, and A. Owen, “A software framework based on Qt for accessing EPICS data using Channel Access”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL002, pp. 30-32. 
[n]	D. Trbojevic et al., “Lattice Design for the ERL Electron Ion Collider in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA028, pp. 127-129. 
[n]	P. G. O, J. E. Dyson, R. G. Maggs, P. Schafstall, and T. J. Zaugg, “Variable Gradient Permanent-Magnet Quadrupole Lenses”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 354-357. 
[n]	D. H. Beck et al., “The New White Rabbit Based Timing System for the FAIR Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRIA01, pp. 242-244. 
[n]	J. Sekutowicz, K. Beard, P. Kneisel, C. Thomas, G. Wu, and S. Zheng, “Superstructures for High Current FEL Application”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE013, pp. 1575-1577. 
[n]	S. Redaelli et al., “The LHC Collimator Controls Architecture - Design and Beam Tests”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN081, pp. 344-346. 
[n]	J. H. Hetzel et al., “Beam-Dynamics Simulation Studies for the HESR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3084-3086. doi:10.18429/JACoW-IPAC2017-WEPIK067
[n]	M. Ivanyan, L. V. Hovakimyan, and A. Sargsyan, “Some Features of Wave Distribution in the Thin-Wall Waveguide”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1641-1643. doi:10.18429/JACoW-IPAC2014-TUPRI037
[n]	M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2016-2019. 
[n]	S. L. Leloir, T. A. Andre, B. Ducoudret, C. Jamet, G. Ledu, and C. Potier de courcy, “Measurement and Control of the Beam Intensity for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF33, pp. 900-902. 
[n]	J.-Y. Hemery, F. Lemeilleur, R. Olsen, and K. Potter, “Background and Luminosity Monitoring at the CERN ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3034-3037. 
[n]	V. Kamerdzhiev and G. W. Saewert, “Tevatron Electron Lens Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP029, pp. 2555-2557. 
[n]	R. E. Thern, “Bending Magnets for the CBA Beam Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2950-2953. 
[n]	W. Chou, “Summary: Joint Session of Other Technologies and Energy Efficiency”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 231-233. doi:10.18429/JACoW-eeFACT2016-THS2H6
[n]	A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924. 
[n]	E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251. 
[n]	A. Ghiorso et al., “The Bevalac--An Economical Facility for Very Energetic Heavy Particle Research”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 155-159. 
[n]	K. N. Sanosyan, M. Aghasyan, R. H. Mikaelyan, and V. M. Vartanian, “Shielding Design Study for CANDLE Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT002, pp. 1816-1818. 
[n]	C. H. Rode, R. A. Andrews, A. W. Maschke, and R. M. Mobley, “Design of the 500 GeV Slow Extracted Beam and Proton Beam Lines”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 984-989. 
[n]	R. Varela et al., “Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1877-1880. doi:10.18429/JACoW-IPAC2018-WEPAF026
[n]	R. E. Thern, “Space-Charge Distortion in the Brookhaven Ionization Profile Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 646-649. 
[n]	P. Owusu, C. Zhang, A. Bartnik, J. Maxson, and S. Karkare, “Optimizing 4D emittance measurements using the pinhole scan technique”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP045, unpublished. 
[n]	K. Chan et al., “Superconducting High-Intensity RF Proton Accelerator for Transmutation Technologies”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F16, pp. 623-627. 
[n]	J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1919-1922. doi:10.18429/JACoW-ICALEPCS2017-THPHA200
[n]	V. B. Reva et al., “Experimental Observation of Longitudinal Electron Cooling of DC and Bunched Proton Beam at 2425 MeV/c at COSY”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOXAUD02, pp. 10-14. 
[n]	J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862. 
[n]	P. Kainberger, “Replacement of Outdated VME Boards as Starting Point for Control System Modernization”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_093. 
[n]	K. Li et al., “A Project of Tandem Accelerator Mass Spectrometry Facility at Peking University”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1471-1474. 
[n]	M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2488-2491. 
[n]	T. Chen, J. Irwin, and R. Siemann, “Simulation of Beam-Beam Lifetime for LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1356-1359. 
[n]	T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1352-1355. 
[n]	C.-Y. Liu, D.-G. Huang, K.-B. Liu, and B. S. Wang, “The Cable Engineering Project for the TPS Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA048, pp. 780-782. 
[n]	E. Molina Marinas, A. Guirao, L. M. Martinez Fresno, I. Podadera, V. Villamayor, and A. Marqueta, “Status of the LIPAc MEBT Local Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1489-1491. doi:10.18429/JACoW-ICALEPCS2017-THPHA053
[n]	J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 266-268. 
[n]	Z. B. Du Toit et al., “Commissioning of the Injector Cyclotron for Polarised and Heavy Ions at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-04, pp. 28-31. 
[n]	S. Singh, J. A. Gore, S. Kulkarni, and P. Singh, “Control System for BARC-TIFR Pelletron”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCA04, pp. 251-253. 
[n]	P. Van Arsdall et al., “The National Ignition Facility: Status of the Integrated Computer Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO102, pp. XX-XX. 
[n]	C. Jamet and E. Petit, “Beam Current Measurements with Logarithmic Converter”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-40, pp. 297-300. 
[n]	D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300. 
[n]	J. A. Martin, “Beam Extraction from Sector - Focused Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B01, pp. XX-XX. 
[n]	F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830. 
[n]	F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427. 
[n]	A. Schempp, H. Deitinghoff, H. Klein, C. Herrlander, A. K?ñllberg, and A. Soltan, “The Cryring RFQ”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-13, pp. 70-72. 
[n]	K. Seiya et al., “Progress in slip stacking and barrier-RF”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY02, pp. 293-297. 
[n]	K. Herlo, “Stepping Motor Control for Septum Plate Positioning”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP019, pp. 125-127. 
[n]	M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346. 
[n]	C. Haddock, V. Kovachev, and D. Capone, “Measurement of Ramp Rate Sensitivity in Model Dipoles with Ebanol-Coated Cable”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ14, pp. 1417-1419. 
[n]	C. Chanavat, M. Arruat, E. Carlier, and N. Magnin, “A Generic Timing Software for Fast Pulsed Magnet Systems at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1003-1006. doi:10.18429/JACoW-ICALEPCS2015-WEPGF127
[n]	J. N. Corlett, J. Johnson, G. Lambertson, and F. Voelker, “Longitudinal and Transverse Feedback Kickers for the ALS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1625-1628. 
[n]	G. Franchetti et al., “The S317 Experiment on High Intensity Beam Loss and Emittance Growth”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA22, pp. 128-130. 
[n]	G. Vignola, “DAPhiNE: The Frascati Phi-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 68-71. 
[n]	C.-Y. Liu, D.-G. Huang, and J. C. Huang, “Optimal Design for Resonant Power Transformer”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD061, pp. 3650-3652. 
[n]	M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18

For LaTeX

Use Complete Form

For BibTeX

References

Back to search