Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. M. Wang et al., “NSLS-II Post Mortem Function Development and Data Analysis of Beam Dump”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1039-1041. doi:10.18429/JACoW-NAPAC2016-WEPOB66
[n] G. V. Eremeev and H. Padamsee, “Temperature Mapping Results on the High-Field Q-Slope of 1500 MHz Single Cell Superconducting Radiofrequency Cavities Baked In-situ at 400 C.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS005, pp. 2334-2336.
[n] J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2847-2850.
[n] I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
[n] P. Musumeci and C. Pellegrini, “IFEL Experiment at Neptune Lab”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A06, pp. 886-888.
[n] G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
[n] M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 185-187. doi:10.18429/JACoW-IPAC2014-MOPRO046
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2661-2664. doi:10.18429/JACoW-IPAC2019-WEPGW079
[n] P. K. Ambattu et al., “Status of the Crab Cavity Design for the CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC026, pp. 1054-1056.
[n] C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
[n] J. A. Rodriguez et al., “Beam Commissioning of the HIE-ISOLDE Post-Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2045-2047. doi:10.18429/JACoW-IPAC2016-WEOBA01
[n] E. R. Harms et al., “Status of the 3.9-GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN096, pp. 2254-2256.
[n] H. Damerau and R. Garoby, “Proposal for the Creation and Storage of Long Bunches in the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT015, pp. 1852-1854.
[n] P. J. Wang et al., “A Simple Way to Introduce an Ajustable Femtosecond Pre-Pulse to Enhance Laser-Driven Proton Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3686-3688. doi:10.18429/JACoW-IPAC2019-THPGW045
[n] P. Antici, “The CRISP Project – Building Synergies between Research Infrastructures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB009, pp. 3248-3250.
[n] H. Burkhardt, D. Manglunki, M. Martini, F. Roncarolo, and G. Rumolo, “Investigation of Space Charge Effects and Intrabeam Scattering for Lead Ions in the SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT013, pp. 1846-1848.
[n] D. E. Johnson, “Challenges Associated with 8 GeV H- Transport and Injection for Fermilab Project-X”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC07, pp. 290-299.
[n] N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 971-973. doi:10.18429/JACoW-IPAC2016-MOPOY053
[n] F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. IPAC'20, Caen, France, May 2020, paper MOOR03, pp. XX-XX.
[n] M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
[n] M. C. Ross, “Industrialization of the ILC Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
For LaTeX
Use Complete Form
For BibTeX
References
- G. M. Wang et al., “NSLS-II Post Mortem Function Development and Data Analysis of Beam Dump”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1039-1041.
- G. V. Eremeev and H. Padamsee, “Temperature Mapping Results on the High-Field Q-Slope of 1500 MHz Single Cell Superconducting Radiofrequency Cavities Baked In-situ at 400 C.”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS005, pp. 2334-2336.
- J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2847-2850.
- I. V. Khodak and V. A. Kushnir, “Performances of the Beam Generated by Metal-Dielectric Cathodes in RF Electron Guns”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT101, pp. 767-769.
- P. Musumeci and C. Pellegrini, “IFEL Experiment at Neptune Lab”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3A06, pp. 886-888.
- G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
- M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 185-187.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2661-2664.
- P. K. Ambattu et al., “Status of the Crab Cavity Design for the CLIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC026, pp. 1054-1056.
- C. Boffo, T. T. Arkan, E. Borissov, H. Carter, F. Le Pimpec, and A. Seryi, “Water Flow Vibration Effect on the NLC RF Structure-girder System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT121, pp. 821-823.
- J. A. Rodriguez et al., “Beam Commissioning of the HIE-ISOLDE Post-Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2045-2047.
- E. R. Harms et al., “Status of the 3.9-GHz Superconducting RF Cavity Technology at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN096, pp. 2254-2256.
- H. Damerau and R. Garoby, “Proposal for the Creation and Storage of Long Bunches in the LHC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT015, pp. 1852-1854.
- P. J. Wang et al., “A Simple Way to Introduce an Ajustable Femtosecond Pre-Pulse to Enhance Laser-Driven Proton Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3686-3688.
- P. Antici, “The CRISP Project – Building Synergies between Research Infrastructures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB009, pp. 3248-3250.
- H. Burkhardt, D. Manglunki, M. Martini, F. Roncarolo, and G. Rumolo, “Investigation of Space Charge Effects and Intrabeam Scattering for Lead Ions in the SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT013, pp. 1846-1848.
- D. E. Johnson, “Challenges Associated with 8 GeV H- Transport and Injection for Fermilab Project-X”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC07, pp. 290-299.
- N. Pichoff et al., “The SARAF-LINAC Project Status”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 971-973.
- F. Chautard, “Welcome to IPAC??20 and Opening Remarks by the LOC Chairman”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOOR03, pp. XX-XX.
- M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
- M. C. Ross, “Industrialization of the ILC Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
Back to search