Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Borer, A. Hofmann, J.-P. Koutchouk, T. Risselada, and B. Zotter, “Measurements of Betatron Phase Advance and Beta Function in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2406-2409.
[n] Y. H. Chin et al., “The 120 MW X-Band Klystron Development at KEK”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP15G, pp. 1894-1899.
[n] F. Furuta et al., “TM-Furnace Qualification at Cornell”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP059, pp. 561-563.
[n] D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
[n] E. Métral, D. Amorim, and X. Buffat, “Comparison between self-consistent and non self-consistent space charge analysis for the evolution of the coherent direct space charge modes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 794-797. doi:10.18429/JACoW-IPAC2024-MOPS35
[n] A. V. Smirnov et al., “Update on CW 8 kW 1.5 GHz Klystron Replacement”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 232-234. doi:10.18429/JACoW-NAPAC2016-MOPOB72
[n] W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] D. Rice, “High Luminosity Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 444-447.
[n] T. W. Eaton et al., “Conducting Targets for /pbar Production of ACOL Past Experience and Prospects”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3060-3063.
[n] M. T. Crofford et al., “Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3363-3366. doi:10.18429/JACoW-IPAC2021-WEPAB299
[n] P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
[n] D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-15, pp. 646-649.
[n] F.-J. Decker et al., “Results on Plasma Focusing of High Energy Density Electron and Positron Beams”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC13, pp. 884-886.
[n] A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1597-1600. doi:10.18429/JACoW-IPAC2019-TUPGW082
[n] Y. B. Sun, W. Ma, L. Lu, L. Yang, Z. Zhang, and G. M. Liu, “Design and Simulation of 500 MHz Single Cell Superconducting Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 46. doi:10.18429/JACoW-SRF2021-SUPCAV014
[n] J. Reijonen et al., “Multicusp Ion Source for Induction Linac Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA25, pp. 1943-1945.
[n] B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
[n] A. P. Shishlo and J. Galambos, “SNS Beam Commissioning Tools and Experience”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD13, pp. 382-384.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Borer, A. Hofmann, J.-P. Koutchouk, T. Risselada, and B. Zotter, “Measurements of Betatron Phase Advance and Beta Function in the ISR”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2406-2409.
- Y. H. Chin et al., “The 120 MW X-Band Klystron Development at KEK”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP15G, pp. 1894-1899.
- F. Furuta et al., “TM-Furnace Qualification at Cornell”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP059, pp. 561-563.
- D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
- E. Métral, D. Amorim, and X. Buffat, “Comparison between self-consistent and non self-consistent space charge analysis for the evolution of the coherent direct space charge modes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS35, pp. 794-797.
- A. V. Smirnov et al., “Update on CW 8 kW 1.5 GHz Klystron Replacement”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 232-234.
- W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 201-204.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- D. Rice, “High Luminosity Operation of the Cornell Electron Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 444-447.
- T. W. Eaton et al., “Conducting Targets for /pbar Production of ACOL Past Experience and Prospects”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3060-3063.
- M. T. Crofford et al., “Spallation Neutron Source Proton Power Upgrade Low-Level RF Control System Development”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3363-3366.
- P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
- D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-15, pp. 646-649.
- F.-J. Decker et al., “Results on Plasma Focusing of High Energy Density Electron and Positron Beams”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC13, pp. 884-886.
- A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1597-1600.
- Y. B. Sun, W. Ma, L. Lu, L. Yang, Z. Zhang, and G. M. Liu, “Design and Simulation of 500 MHz Single Cell Superconducting Cavity”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 46.
- J. Reijonen et al., “Multicusp Ion Source for Induction Linac Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA25, pp. 1943-1945.
- B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
- A. P. Shishlo and J. Galambos, “SNS Beam Commissioning Tools and Experience”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD13, pp. 382-384.
Back to search
