Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
[n] J. Wernsmann and F. Lemery, “Development and laboratory validation of a precise alignment setup for beam-based THz radiation generation at the STERN experimental area of the European XFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB012, unpublished.
[n] D. C. Weisser, “Laboratory Report, Department of Nuclear Physics, Australian National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A03, pp. XX-XX.
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
[n] K. R. Chu, S. Kuechler, Y. C. Tsai, and E. Weihreter, “Optimization and Experimental Characterization of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP09C, pp. 1826-1828.
[n] J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
[n] K. Skoufaris, C. M. Garcia Jaimes, and R. Tomas, “Interplay between sextupole settings and single particle instabilities during the FCC-ee commissioning”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM028, unpublished.
[n] A. Rauchas and R. Zolecki, “Injected Beam Chopper System for the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2947-2950.
[n] T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4285-4287. doi:10.18429/JACoW-IPAC2019-THPTS073
[n] S. Bai et al., “Beam-Gas and Beam-Thermal Photon Scattering in CEPC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 626-629. doi:10.18429/JACoW-IPAC2019-MOPRB024
[n] C. Goffing et al., “Experimental validation of parallel quadrupole beam-based alignment at KARA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM111, unpublished.
[n] I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3143-3146. doi:10.18429/JACoW-IPAC2023-WEPL017
[n] B. Steffen, J. Wernsmann, K. Floettmann, and F. Lemery, “Design, fabrication, and characterization of 3D-printed photonic crystals for THz filtering applications in particle accelerator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB011, unpublished.
[n] S. S. Jagabathuni, F. Carlier, and S. Liuzzo, “FCC-ee Interaction point optics correction with alignment errors using local tuning knobs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM038, unpublished.
[n] M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
[n] R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
[n] M. Haj Tahar, F. Meot, and S. Peggs, “Energy Efficiency of High Power Accelerators for ADS Applications”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2001-2003. doi:10.18429/JACoW-IPAC2016-TUPOY044
[n] D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
[n] W. Bartmann et al., “Beam Loss Control for the Unstripped Ions from the PS2 Charge Exchange Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP039, pp. 3790-3792.
[n] F. Perez and M. J. Vicente, “Lifetime Calculations for the LSB Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP114G, pp. 1438-1440.
[n] G. Dugan and M. J. Syphers, “50 TeV High-Field VLHC with a Low Field Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA9, pp. 2632-2634.
[n] M. Schenk et al., “Modeling Particle Stability Plots for Accelerator Optimization Using Adaptive Sampling”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1923-1926. doi:10.18429/JACoW-IPAC2021-TUPAB216
[n] S. Anami et al., “High Power Isolator for the KEK Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-9, pp. 367-369.
[n] Y. Papaphilippou, J. Barranco, W. Bartmann, M. Benedikt, D. Trbojevic, and R. de Maria, “Lattice Options for PS2”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGE06, pp. 402-402.
[n] F. Ebeling, P. Schuett, and T. Weiland, “Selfconsistent Simulation of High Power Tubes with TBCI-SF”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 678-681.
[n] J. Molson, R. J. Barlow, H. L. Owen, and A. M. Toader, “Advances With Merlin - A Beam Tracking Code”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC057, pp. 1853-1855.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
- J. Wernsmann and F. Lemery, “Development and laboratory validation of a precise alignment setup for beam-based THz radiation generation at the STERN experimental area of the European XFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB012, this conference.
- D. C. Weisser, “Laboratory Report, Department of Nuclear Physics, Australian National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93A03, pp. XX-XX.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
- K. R. Chu, S. Kuechler, Y. C. Tsai, and E. Weihreter, “Optimization and Experimental Characterization of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP09C, pp. 1826-1828.
- J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
- K. Skoufaris, C. M. Garcia Jaimes, and R. Tomas, “Interplay between sextupole settings and single particle instabilities during the FCC-ee commissioning”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM028, this conference.
- A. Rauchas and R. Zolecki, “Injected Beam Chopper System for the Intense Pulsed Neutron Source Accelerator System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2947-2950.
- T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4285-4287.
- S. Bai et al., “Beam-Gas and Beam-Thermal Photon Scattering in CEPC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 626-629.
- C. Goffing et al., “Experimental validation of parallel quadrupole beam-based alignment at KARA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM111, this conference.
- I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL017, pp. 3143-3146.
- B. Steffen, J. Wernsmann, K. Floettmann, and F. Lemery, “Design, fabrication, and characterization of 3D-printed photonic crystals for THz filtering applications in particle accelerator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB011, this conference.
- S. S. Jagabathuni, F. Carlier, and S. Liuzzo, “FCC-ee Interaction point optics correction with alignment errors using local tuning knobs”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM038, this conference.
- M. J. Vicente, “Conceptual Design of the Vacuum System for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP098L, pp. 2530-2534.
- R. Zou, Z. Dong, Z. Wang, Y. Qin, and Y. Du, “Investigation of beam generation in laser back-illumination mode using metal cathodes of varying thickness in a photocathode DC electron gun”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR88, unpublished.
- M. Haj Tahar, F. Meot, and S. Peggs, “Energy Efficiency of High Power Accelerators for ADS Applications”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2001-2003.
- D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
- W. Bartmann et al., “Beam Loss Control for the Unstripped Ions from the PS2 Charge Exchange Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP039, pp. 3790-3792.
- F. Perez and M. J. Vicente, “Lifetime Calculations for the LSB Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP114G, pp. 1438-1440.
- G. Dugan and M. J. Syphers, “50 TeV High-Field VLHC with a Low Field Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA9, pp. 2632-2634.
- M. Schenk et al., “Modeling Particle Stability Plots for Accelerator Optimization Using Adaptive Sampling”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1923-1926.
- S. Anami et al., “High Power Isolator for the KEK Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-9, pp. 367-369.
- Y. Papaphilippou, J. Barranco, W. Bartmann, M. Benedikt, D. Trbojevic, and R. de Maria, “Lattice Options for PS2”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGE06, pp. 402-402.
- F. Ebeling, P. Schuett, and T. Weiland, “Selfconsistent Simulation of High Power Tubes with TBCI-SF”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 678-681.
- J. Molson, R. J. Barlow, H. L. Owen, and A. M. Toader, “Advances With Merlin - A Beam Tracking Code”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC057, pp. 1853-1855.
Back to search