Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Gounder et al., “A Study of Emittance Growth in the Recycler Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH056, pp. 3356-3358.
[n] B.-S. Wang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Development of a GaN FETs based fully digital correction magnet power supply platform for taiwan photon source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3776-3778. doi:10.18429/JACoW-IPAC2023-WEPM087
[n] H. Aoyagi et al., “Diamond-based Beam Halo Monitor Equipped with RF Fingers for SACLA”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOOB03, pp. 12-14.
[n] J.-L. Vay, J. Qiang, J. F. Amundson, E. G. Stern, Z. Li, and C.-K. Ng, “Needs and Considerations for a Consortium of Accelerator Modeling”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO2LR01, pp. 175-177.
[n] G. Wu, B. C. Brown, D. P. Capista, R. H. Flora, D. E. Johnson, and K. S. Martin, “Tune Control in the Fermilab Main Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP27, pp. 714-716.
[n] J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 394-396. doi:10.18429/JACoW-ICALEPCS2017-TUPHA012
[n] S. G. Tantawi, G. B. Bowden, C. Chang, J. Neilson, M. Shumail, and C. Pellegrini, “Application of the Balanced Hybrid Mode in Overmoded Corrugated Waveguides to Short Wavelength Dynamic Undulators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC183, pp. 3326-3328.
[n] M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 148-153.
[n] K. P. Wootton, H. Cease, M. Erdmann, S. M. Oprondek, M. Ramanathan, and B. X. Yang, “X-Ray Beam Position Monitor Silicon Photodiode Measurements for the Advanced Photon Source Upgrade”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 46-50. doi:10.18429/JACoW-IBIC2020-TUPP10
[n] B. C. Brown, C. M. Bhat, D. J. Harding, P. S. Martin, and G. Wu, “Design for Fermilab Main Injector Magnet Ramps which Account for Hysteresis”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P008, pp. 3245-3247.
[n] C. C. Liang et al., “The Protection Instrument for Cryogenic Phase Separator Pressure Relief Valve of TPS Beamline”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1350-1352. doi:10.18429/JACoW-IPAC2019-TUPMP045
[n] U. Lehnert et al., “Conceptual Design of a THz Facility at the ELBE Radiation Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC05, pp. 656-659.
[n] W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
[n] T. Hamano, R. Fujihara, and A. Yamashita, “Development of High Resolution Large Display for SPring-8 Central Control Room”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP008, pp. 111-113.
[n] N. Hafz, C. Kim, G. H. Kim, H. Suk, and J. Lee, “Thomson Scattering of Intense Femtosecond Laser from Relativistic Plasma-Accelerated Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20005, pp. XX-XX.
[n] P. Cameron, A. V. Fedotov, and N. Malitsky, “Tune Measurement in the SNS Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI071, pp. 1858-1860.
[n] L.-H. Chang, M.-C. Lin, C. Wang, and M.-S. Yeh, “Effects of the Passive Harmonic Cavity on the Beam Bunch”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE073, pp. 3904-3906.
[n] D. Neuffer, “Collective Longitudinal Motion in Intense Ion Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2434-2437.
[n] T. Inagaki et al., “Studies on high repetition rate operation of SACLA with X-band normal conducting accelerator”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 747-750. doi:10.18429/JACoW-LINAC2024-THPB054
[n] X. J. Nie, L. Kang, L. Liu, and H. Qu, “Anti-earthquake Structural Design for CSNS Beam Dump”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI028, pp. 3358-3360.
[n] Y. C. Yang, C. K. Chan, C.-C. Chang, A. Y. Chen, J.-Y. Chuang, and C. H. Huang, “The Beam Cleaning Analysis for the TPS Vacuum System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1344-1346. doi:10.18429/JACoW-IPAC2019-TUPMP042
[n] W. Ma, Y. He, L. Lu, X. B. Xu, Z. L. Zhang, and H. W. Zhao, “Design Study on an Injector RFQ for Heavy Ion Accelerator Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 928-931. doi:10.18429/JACoW-IPAC2016-MOPOY033
[n] L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
[n] T. A. Trinh et al., “Development of a 13.56MHz RF Implanter at PEFP”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA031, pp. 3747-3749.
[n] Y. Yang et al., “Commissioning Progress of LEAF at IMP”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 42-45. doi:10.18429/JACoW-HIAT2018-MOPB05
For LaTeX
Use Complete Form
For BibTeX
References
- K. Gounder et al., “A Study of Emittance Growth in the Recycler Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH056, pp. 3356-3358.
- B.-S. Wang, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “Development of a GaN FETs based fully digital correction magnet power supply platform for taiwan photon source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM087, pp. 3776-3778.
- H. Aoyagi et al., “Diamond-based Beam Halo Monitor Equipped with RF Fingers for SACLA”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOOB03, pp. 12-14.
- J.-L. Vay, J. Qiang, J. F. Amundson, E. G. Stern, Z. Li, and C.-K. Ng, “Needs and Considerations for a Consortium of Accelerator Modeling”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO2LR01, pp. 175-177.
- G. Wu, B. C. Brown, D. P. Capista, R. H. Flora, D. E. Johnson, and K. S. Martin, “Tune Control in the Fermilab Main Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP27, pp. 714-716.
- J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 394-396.
- S. G. Tantawi, G. B. Bowden, C. Chang, J. Neilson, M. Shumail, and C. Pellegrini, “Application of the Balanced Hybrid Mode in Overmoded Corrugated Waveguides to Short Wavelength Dynamic Undulators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC183, pp. 3326-3328.
- M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 148-153.
- K. P. Wootton, H. Cease, M. Erdmann, S. M. Oprondek, M. Ramanathan, and B. X. Yang, “X-Ray Beam Position Monitor Silicon Photodiode Measurements for the Advanced Photon Source Upgrade”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 46-50.
- B. C. Brown, C. M. Bhat, D. J. Harding, P. S. Martin, and G. Wu, “Design for Fermilab Main Injector Magnet Ramps which Account for Hysteresis”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P008, pp. 3245-3247.
- C. C. Liang et al., “The Protection Instrument for Cryogenic Phase Separator Pressure Relief Valve of TPS Beamline”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1350-1352.
- U. Lehnert et al., “Conceptual Design of a THz Facility at the ELBE Radiation Source”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC05, pp. 656-659.
- W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
- T. Hamano, R. Fujihara, and A. Yamashita, “Development of High Resolution Large Display for SPring-8 Central Control Room”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP008, pp. 111-113.
- N. Hafz, C. Kim, G. H. Kim, H. Suk, and J. Lee, “Thomson Scattering of Intense Femtosecond Laser from Relativistic Plasma-Accelerated Electron Bunches”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20005, pp. XX-XX.
- P. Cameron, A. V. Fedotov, and N. Malitsky, “Tune Measurement in the SNS Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI071, pp. 1858-1860.
- L.-H. Chang, M.-C. Lin, C. Wang, and M.-S. Yeh, “Effects of the Passive Harmonic Cavity on the Beam Bunch”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE073, pp. 3904-3906.
- D. Neuffer, “Collective Longitudinal Motion in Intense Ion Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2434-2437.
- T. Inagaki et al., “Studies on high repetition rate operation of SACLA with X-band normal conducting accelerator”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 747-750.
- X. J. Nie, L. Kang, L. Liu, and H. Qu, “Anti-earthquake Structural Design for CSNS Beam Dump”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI028, pp. 3358-3360.
- Y. C. Yang, C. K. Chan, C.-C. Chang, A. Y. Chen, J.-Y. Chuang, and C. H. Huang, “The Beam Cleaning Analysis for the TPS Vacuum System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1344-1346.
- W. Ma, Y. He, L. Lu, X. B. Xu, Z. L. Zhang, and H. W. Zhao, “Design Study on an Injector RFQ for Heavy Ion Accelerator Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 928-931.
- L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
- T. A. Trinh et al., “Development of a 13.56MHz RF Implanter at PEFP”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA031, pp. 3747-3749.
- Y. Yang et al., “Commissioning Progress of LEAF at IMP”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 42-45.
Back to search