Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1250-1253. doi:10.18429/JACoW-IPAC2023-MOPM116
[n] Y. Lu et al., “Enhancing the MOGA Optimization Process at ALS-U with Machine Learning”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 387-390. doi:10.18429/JACoW-IPAC2021-MOPAB106
[n] C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
[n] Ji Qiang, Salman Habib, “A Second Order Stochastic Leap-Frog Algorithm for Langevin Simulation”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA20, pp. 89-91.
[n] A. Seryi, “Investigations of Slow Motions of the SLAC Linac Tunnel”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA11, pp. 62-64.
[n] R. Sabattier, N. Breteau, G. Goin, and L. Le Polotec, “A New Beryllium Target for the Orleans Neutrontherapy Facility”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J45, pp. 483-485.
[n] T. Dickinson, “A Gradient Ferrite Pulsed Inflector for 130 Me V Electrons”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 744-746.
[n] K. Umemori, M. Egi, E. Kako, T. Konomi, S. Michizono, and H. Sakai, “Design and Commissioning of KEK New Vacuum Furnace for SRF Cavity Development”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 496-498. doi:10.18429/JACoW-LINAC2018-TUPO070
[n] A. Seryi, “Ground Motion Studies and Modeling for the Interaction Region of a Linear Collider”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA12, pp. 65-67.
[n] R. Schuhmann, “Improvement in 3D computation of RF-losses in resonant cavities”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB20, pp. 842-844.
[n] F. Kramer et al., “Simulations and Measurements of the BPM Non Linearity and Kicker Timing Influence on the Tune Shift With Amplitude (TSWA) Measurement at BESSY II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2107-2109. doi:10.18429/JACoW-IPAC2018-WEPAK010
[n] T. Dickinson, “Radiation Safety Systems at the NSLS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1605-1608.
[n] J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
[n] P. Zisopoulos, F. Antoniou, H. Bartosik, and Y. Papaphilippou, “Optics considerations for the Delay Loop in the CLIC Damping Rings Complex”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC049, pp. 1108-1110.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Li, N. Yang, and Z. Zhao, “Theoretical studies on polarization control of segmental undulator system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM116, pp. 1250-1253.
- Y. Lu et al., “Enhancing the MOGA Optimization Process at ALS-U with Machine Learning”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 387-390.
- C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
- Ji Qiang, Salman Habib, “A Second Order Stochastic Leap-Frog Algorithm for Langevin Simulation”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA20, pp. 89-91.
- A. Seryi, “Investigations of Slow Motions of the SLAC Linac Tunnel”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA11, pp. 62-64.
- R. Sabattier, N. Breteau, G. Goin, and L. Le Polotec, “A New Beryllium Target for the Orleans Neutrontherapy Facility”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J45, pp. 483-485.
- T. Dickinson, “A Gradient Ferrite Pulsed Inflector for 130 Me V Electrons”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 744-746.
- K. Umemori, M. Egi, E. Kako, T. Konomi, S. Michizono, and H. Sakai, “Design and Commissioning of KEK New Vacuum Furnace for SRF Cavity Development”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 496-498.
- A. Seryi, “Ground Motion Studies and Modeling for the Interaction Region of a Linear Collider”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA12, pp. 65-67.
- R. Schuhmann, “Improvement in 3D computation of RF-losses in resonant cavities”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB20, pp. 842-844.
- F. Kramer et al., “Simulations and Measurements of the BPM Non Linearity and Kicker Timing Influence on the Tune Shift With Amplitude (TSWA) Measurement at BESSY II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2107-2109.
- T. Dickinson, “Radiation Safety Systems at the NSLS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1605-1608.
- J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX.
- P. Zisopoulos, F. Antoniou, H. Bartosik, and Y. Papaphilippou, “Optics considerations for the Delay Loop in the CLIC Damping Rings Complex”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC049, pp. 1108-1110.
Back to search
