Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
[n] P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
[n] E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3134-3136. doi:10.18429/JACoW-IPAC2018-THPAF068
[n] D. Stratakis, J. P. Morgan, M. J. Syphers, A. Fiedler, S-C. Kim, and M. Korostelev, “Towards commissioning the Fermilab Muon g-2 Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4505-4508. doi:10.18429/JACoW-IPAC2017-THPVA033
[n] D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1255-1258.
[n] A. Mondelli, K. T. Tsang, and C. Kostas, “A High-Order Moment Simulation Model”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3270-3273.
[n] J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 758-761. doi:10.18429/JACoW-NAPAC2016-WEPOA30
[n] S. de Simone and A. Ghigo, “DAPhiNA Accumulator Kickers”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1449-1452.
[n] K. T. Tsang, D. P. Chernin, C. Kostas, A. Mondelli, and J. J. Petillo, “A High-Order Moment Simulation Model”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 312-315.
[n] P. G. Lane, P. Snopok, Y. Torun, and A. V. Kochemirovskiy, “Acoustic Localization of RF Cavity Breakdown: Status and Progress”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 470-473. doi:10.18429/JACoW-IPAC2016-MOPMW033
[n] V. Sajaev, M. Borland, Y.-C. Chae, and L. Emery, “Experimental Verification of Single-bunch Accumulation Limit Dependence on Impedance at the APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBB2, pp. 405-407.
[n] G. Biallas, D. Douglas, J. Karn, and K. Tremblay, “Magnetic Measurement of the PI Bend Dipole Magnets for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP147, pp. 3312-3314.
[n] E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Peak Detected Schottky Spectrum”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C04, pp. 363-367.
[n] S. Isagawa et al., “Operational Experience and Recent Upgrading of TRISTAN High Power CW Klystrons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1206-1209.
[n] M. Bernard et al., “Secondary Emission Grids for Low and High Energy Electron Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP058L, pp. 1680-1682.
[n] E. Acerbi et al., “Progress Report on the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-02, pp. 26-29.
[n] G. Parzen, “Theory of the Beta Function Shift Due to Linear Coupling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 655-658.
[n] P. Schipani and D. Mancini, “VST Telescope Dynamic Analysis and Position Control Algorithms”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP061, pp. XX-XX.
[n] G. V. Dolbilov, A. A. Fateev, N. I. Lebedev, and V. A. Petrov, “Project of Control System for Accelerator SILUND-21”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP048L, pp. 1787-1788.
[n] A. Ijspeert, R. Bellone, and P. Sievers, “The New Internal Beam Dump at the SPS. Temperature and Stress Calculations and Its Design.”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3062-3065.
[n] N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1496-1499.
[n] A. Drago et al., “High Current Multibunch Operation at DAɸNE”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH130, pp. 3543-3545.
[n] R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1824-1827.
[n] A. V. Tiunov et al., “Variants of Optics Schemes and Accelerator Configurations for Athens Microtron: Preliminary Considerations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ01, pp. 3285-3287.
[n] F. Z. Chen et al., “SXFEL Linac BPM System Development and Performance Evaluation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4794-4796. doi:10.18429/JACoW-IPAC2018-THPML067
[n] M. Yudelev, J. Burmeister, E. Blosser, R. L. Maughan, and C. Kota, “Hospital Based Superconducting Cyclotron for Neutron Therapy: Medical Physics Perspective”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-14, pp. XX-XX.
[n] D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3782-3785. doi:10.18429/JACoW-IPAC2019-THPGW089
[n] G. Spalek and A. Klapetzky, “A Coaxial Line Azimuthal Field Stabilizer for Radio Frequency Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO410, pp. 67-69.
[n] S. Simrock, L. Merminga, J. Perry, E. Woodworth, R. May, and G. Stapleton, “The CEBAF Beam Loss Sensors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2184-2187.
[n] J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 894-898.
[n] A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2503-2506.
[n] P. Savage et al., “The Mechanical Engineering Design of the FETS RFQ”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD056, pp. 810-812.
[n] T. Tajima et al., “Q Disease: Insights from 350 MHz Spoke Cavities Tests and ERD Analyses of Hydrogen in Niobium”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP19, pp. 655-657.
[n] R. P. Johnson, W. R. Knopf, and A. D. Thomas, “The Fermilab Timeline Generation System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2053-2056.
[n] M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
[n] M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
[n] R. C. York and C. Reece, “RF Steering in the CEBAF CW Superconducting Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1307-1310.
[n] M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 449-454.
[n] M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
[n] S. M. H. Alsari, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “FETS RF System Design and Circulator Testing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI067, pp. 2851-2853.
[n] D. R. Dechow, J. F. Amundson, B. Norris, P. Spentzouris, and P. Stoltz, “Software Components for Electron Cloud Simulation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP088, pp. 1735-1737.
[n] D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4530-4533. doi:10.18429/JACoW-IPAC2018-THPMK097
[n] J. C. Brutus et al., “Mechanical Design of 112 MHz SRF Gun FPC for CeC PoP Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC07, pp. 802-804.
[n] R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
[n] A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
[n] E. Ciapala et al., “Commissioning of the 400 MHz LHC RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP124, pp. 847-849.
[n] R. Warange and R. E. Braddock, “SKA Synchronization and Timing Local Monitor Control - Software Design Approach”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1190-1194. doi:10.18429/JACoW-ICALEPCS2017-THCPL04
[n] G. V. Dolbilov, “Two-Beam Induction Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B15, pp. 904-906.
[n] W. Lawson et al., “Design Considerations of High Peak Power Gyroklystrons for Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-47, pp. 643-645.
[n] W. H?Âfle et al., “LHC Transverse Feedback System and its Hardware Commissioning”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC121, pp. 3266-3268.
[n] K. Zenker, U. Lehnert, A. E. Rivera Osorio, R. Steinbrück, and M. Kuntzsch, “Wide range low cost digital RF phase shifter”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 546-550. doi:10.18429/JACoW-IBIC2025-TUPMO32
[n] A. Macridin, J. F. Amundson, D. O. McCarron, L. K. Spentzouris, and P. Spentzouris, “Wake Functions for Laminated Magnets and Applications for Fermilab Booster Synchrotron”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2C05, pp. 529-533.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Wilde et al., “High Power Impulse Magnetron Sputtering of Thin Films for Superconducting RF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB040, pp. 647-650.
- P. Pizzol et al., “Superconducting Coatings Synthetized by CVD/PECVD for SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB038, pp. 643-646.
- E. G. Stern, J. F. Amundson, and A. Macridin, “Suppression of Instabilities Generated by an Anti-Damper With a Nonlinear Magnetic Element in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3134-3136.
- D. Stratakis, J. P. Morgan, M. J. Syphers, A. Fiedler, S-C. Kim, and M. Korostelev, “Towards commissioning the Fermilab Muon g-2 Experiment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4505-4508.
- D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1255-1258.
- A. Mondelli, K. T. Tsang, and C. Kostas, “A High-Order Moment Simulation Model”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3270-3273.
- J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 758-761.
- S. de Simone and A. Ghigo, “DAPhiNA Accumulator Kickers”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1449-1452.
- K. T. Tsang, D. P. Chernin, C. Kostas, A. Mondelli, and J. J. Petillo, “A High-Order Moment Simulation Model”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 312-315.
- P. G. Lane, P. Snopok, Y. Torun, and A. V. Kochemirovskiy, “Acoustic Localization of RF Cavity Breakdown: Status and Progress”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 470-473.
- V. Sajaev, M. Borland, Y.-C. Chae, and L. Emery, “Experimental Verification of Single-bunch Accumulation Limit Dependence on Impedance at the APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBB2, pp. 405-407.
- G. Biallas, D. Douglas, J. Karn, and K. Tremblay, “Magnetic Measurement of the PI Bend Dipole Magnets for the IR-FEL at the Thomas Jefferson National Accelerator Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP147, pp. 3312-3314.
- E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Peak Detected Schottky Spectrum”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C04, pp. 363-367.
- S. Isagawa et al., “Operational Experience and Recent Upgrading of TRISTAN High Power CW Klystrons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1206-1209.
- M. Bernard et al., “Secondary Emission Grids for Low and High Energy Electron Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP058L, pp. 1680-1682.
- E. Acerbi et al., “Progress Report on the Milan Superconducting Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper B-02, pp. 26-29.
- G. Parzen, “Theory of the Beta Function Shift Due to Linear Coupling”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 655-658.
- P. Schipani and D. Mancini, “VST Telescope Dynamic Analysis and Position Control Algorithms”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP061, pp. XX-XX.
- G. V. Dolbilov, A. A. Fateev, N. I. Lebedev, and V. A. Petrov, “Project of Control System for Accelerator SILUND-21”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP048L, pp. 1787-1788.
- A. Ijspeert, R. Bellone, and P. Sievers, “The New Internal Beam Dump at the SPS. Temperature and Stress Calculations and Its Design.”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3062-3065.
- N. D. Arnold, R. T. Daly, M. R. Kraimer, W. P. McDowell, and G. J. Nawrocki, “I/O Subnets for the APS Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1496-1499.
- A. Drago et al., “High Current Multibunch Operation at DAɸNE”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH130, pp. 3543-3545.
- R. Gavaggio, M. Steffensen, and P. M. Strubin, “Using Models to allow for Object Oriented Programming of the Vacuum Control Systems”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1824-1827.
- A. V. Tiunov et al., “Variants of Optics Schemes and Accelerator Configurations for Athens Microtron: Preliminary Considerations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ01, pp. 3285-3287.
- F. Z. Chen et al., “SXFEL Linac BPM System Development and Performance Evaluation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4794-4796.
- M. Yudelev, J. Burmeister, E. Blosser, R. L. Maughan, and C. Kota, “Hospital Based Superconducting Cyclotron for Neutron Therapy: Medical Physics Perspective”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-14, pp. XX-XX.
- D. Shu et al., “Mechanical Design of a Diamond Crystal Hard X-Ray Self-Seeding Monochromator for PAL-XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3782-3785.
- G. Spalek and A. Klapetzky, “A Coaxial Line Azimuthal Field Stabilizer for Radio Frequency Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO410, pp. 67-69.
- S. Simrock, L. Merminga, J. Perry, E. Woodworth, R. May, and G. Stapleton, “The CEBAF Beam Loss Sensors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2184-2187.
- J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 894-898.
- A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2503-2506.
- P. Savage et al., “The Mechanical Engineering Design of the FETS RFQ”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD056, pp. 810-812.
- T. Tajima et al., “Q Disease: Insights from 350 MHz Spoke Cavities Tests and ERD Analyses of Hydrogen in Niobium”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP19, pp. 655-657.
- R. P. Johnson, W. R. Knopf, and A. D. Thomas, “The Fermilab Timeline Generation System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2053-2056.
- M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452.
- M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424.
- R. C. York and C. Reece, “RF Steering in the CEBAF CW Superconducting Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1307-1310.
- M. Reiser, P. Delphin, F. Dupont, and T. Zinneman, “Center-Region Design and Initial Orbits in the Maryland University Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 449-454.
- M. G. Mazarakis et al., “'Smile'' a New Version for the RADLAC II Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU448, pp. 438-440.
- S. M. H. Alsari, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “FETS RF System Design and Circulator Testing”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI067, pp. 2851-2853.
- D. R. Dechow, J. F. Amundson, B. Norris, P. Spentzouris, and P. Stoltz, “Software Components for Electron Cloud Simulation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP088, pp. 1735-1737.
- D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4530-4533.
- J. C. Brutus et al., “Mechanical Design of 112 MHz SRF Gun FPC for CeC PoP Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC07, pp. 802-804.
- R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
- A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC120, pp. 361-363.
- E. Ciapala et al., “Commissioning of the 400 MHz LHC RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP124, pp. 847-849.
- R. Warange and R. E. Braddock, “SKA Synchronization and Timing Local Monitor Control - Software Design Approach”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1190-1194.
- G. V. Dolbilov, “Two-Beam Induction Linear Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B15, pp. 904-906.
- W. Lawson et al., “Design Considerations of High Peak Power Gyroklystrons for Linear Colliders”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-47, pp. 643-645.
- W. H?Âfle et al., “LHC Transverse Feedback System and its Hardware Commissioning”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC121, pp. 3266-3268.
- K. Zenker, U. Lehnert, A. E. Rivera Osorio, R. Steinbrück, and M. Kuntzsch, “Wide range low cost digital RF phase shifter”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 546-550.
- A. Macridin, J. F. Amundson, D. O. McCarron, L. K. Spentzouris, and P. Spentzouris, “Wake Functions for Laminated Magnets and Applications for Fermilab Booster Synchrotron”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2C05, pp. 529-533.
Back to search