Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Zagorodnov, M. Dohlus, and T. Limberg, “Impact of Undulator Wakefileds and Tapering on European X-ray FEL Performance”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH015, pp. 83-85.
[n] Y. Li and J. Pflueger, “High Accuracy Shimming Technique for the Phase Shifters of the European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP007, pp. 29-33.
[n] Y. Li, X. Liu, V. Medjidzade, J. Conway, and M. Palmer, “Implementation and Operation of Electron Cloud Diagnostics for CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST01, pp. 83-87.
[n] Y. Li and J. Pflueger, “Control of Gap Dependent Phase Errors on the Undulator Segments for the European XFEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 685-689. doi:10.18429/JACoW-FEL2015-WEP054
[n] D. M. Kaplan, “Muon Cooling, Muon Colliders, and the MICE Experiment”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA01, pp. 11-15.
[n] J. Kim et al., “In Situ SEY Measurements at CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST12, pp. 140-146.
[n] M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
[n] L. Emery, V. Sajaev, and A. Xiao, “New Consideration for Insertion-Device Dipole-Error Perturbation Requirements When Including the Effects of Orbit Feedback”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO09, pp. 255-257.
[n] D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
[n] J. T. M. Lyles, S. Archuletta, D. Baca, J. Davis, D. Rees, and P. A. Torrez, “Progress on New High Power RF System for LANSCE DTL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS023, pp. 2382-2384.
[n] P. O. Schmid and N. J. Walker, “A Spin Rotator for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS115, pp. 831-833.
[n] V. Kobets et al., “The Electron Linear Accelerator LUE-200 - Driver the IREN Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC010, pp. 346-348.
[n] R. A. Marsh et al., “LLNL X-band Test Station Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI077, pp. 2872-2874.
[n] T. Higuchi, Co. Ltd, and K. Saito, “Development of Hydrogen-free EP and Hydrogen Absorption Phenomena”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO15, pp. 572-578.
[n] M. L. Neubauer, E. P. Chojnacki, M. Liepe, H. Padamsee, and R. Sah, “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP043, pp. 2092-2094.
[n] S. Bettoni, S. Guiducci, M. A. Preger, P. Raimondi, and C. Sanelli, “Reduction of the Non-Linearities in the DAPHNE Main Rings Wigglers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN035, pp. 1463-1465.
[n] S. Tomassini et al., “DAPHNE Upgrade: A New Magnetic and Mechanical Layout”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN036, pp. 1466-1468.
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
[n] K. Harada, T. Koseki, N. Nakamura, M. Satoh, H. Takaki, and Y. Kamiya, “The Effects of the Insertion Devices at the Super SOR Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH013, pp. 2471-2473.
[n] S. Matsuba et al., “Fast Local Bump System for the Helicity Switching at the Photon Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP072, pp. 2429-2431.
[n] R. De Maria et al., “The High Luminosity Challenge: Potential and Limitations of High-Intensity High-Brightness Beams in the LHC and its Injectors”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOXLR01, pp. XX-XX.
[n] T. Higuchi et al., “Development of Horizontal Chemical Polishing for Superconducting Niobium Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP025, pp. 254-257.
[n] S. Tomassini et al., “The SuperB Project Site Layout”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP047, pp. 2598-2600.
[n] S. Bartalucci et al., “Design Criteria and Lattice Study for the LNF Phi-Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1476-1479.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Zagorodnov, M. Dohlus, and T. Limberg, “Impact of Undulator Wakefileds and Tapering on European X-ray FEL Performance”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH015, pp. 83-85.
- Y. Li and J. Pflueger, “High Accuracy Shimming Technique for the Phase Shifters of the European XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP007, pp. 29-33.
- Y. Li, X. Liu, V. Medjidzade, J. Conway, and M. Palmer, “Implementation and Operation of Electron Cloud Diagnostics for CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST01, pp. 83-87.
- Y. Li and J. Pflueger, “Control of Gap Dependent Phase Errors on the Undulator Segments for the European XFEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 685-689.
- D. M. Kaplan, “Muon Cooling, Muon Colliders, and the MICE Experiment”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA01, pp. 11-15.
- J. Kim et al., “In Situ SEY Measurements at CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST12, pp. 140-146.
- M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20.
- L. Emery, V. Sajaev, and A. Xiao, “New Consideration for Insertion-Device Dipole-Error Perturbation Requirements When Including the Effects of Orbit Feedback”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO09, pp. 255-257.
- D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
- J. T. M. Lyles, S. Archuletta, D. Baca, J. Davis, D. Rees, and P. A. Torrez, “Progress on New High Power RF System for LANSCE DTL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS023, pp. 2382-2384.
- P. O. Schmid and N. J. Walker, “A Spin Rotator for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS115, pp. 831-833.
- V. Kobets et al., “The Electron Linear Accelerator LUE-200 - Driver the IREN Facility”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC010, pp. 346-348.
- R. A. Marsh et al., “LLNL X-band Test Station Status”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI077, pp. 2872-2874.
- T. Higuchi, Co. Ltd, and K. Saito, “Development of Hydrogen-free EP and Hydrogen Absorption Phenomena”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO15, pp. 572-578.
- M. L. Neubauer, E. P. Chojnacki, M. Liepe, H. Padamsee, and R. Sah, “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP043, pp. 2092-2094.
- S. Bettoni, S. Guiducci, M. A. Preger, P. Raimondi, and C. Sanelli, “Reduction of the Non-Linearities in the DAPHNE Main Rings Wigglers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN035, pp. 1463-1465.
- S. Tomassini et al., “DAPHNE Upgrade: A New Magnetic and Mechanical Layout”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN036, pp. 1466-1468.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
- K. Harada, T. Koseki, N. Nakamura, M. Satoh, H. Takaki, and Y. Kamiya, “The Effects of the Insertion Devices at the Super SOR Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH013, pp. 2471-2473.
- S. Matsuba et al., “Fast Local Bump System for the Helicity Switching at the Photon Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP072, pp. 2429-2431.
- R. De Maria et al., “The High Luminosity Challenge: Potential and Limitations of High-Intensity High-Brightness Beams in the LHC and its Injectors”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOXLR01, pp. XX-XX.
- T. Higuchi et al., “Development of Horizontal Chemical Polishing for Superconducting Niobium Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP025, pp. 254-257.
- S. Tomassini et al., “The SuperB Project Site Layout”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP047, pp. 2598-2600.
- S. Bartalucci et al., “Design Criteria and Lattice Study for the LNF Phi-Factory”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1476-1479.
Back to search