Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. A. Miller et al., “Design and Performance of the Biased Drift Tube System in the BNL Electron Lens”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF31, pp. 291-294.
[n] R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2752-2754. doi:10.18429/JACoW-IPAC2016-WEPOR036
[n] A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, M. Shirakata, and M. Uota, “Radiation and Residual Dose Rate Induced by the Beam Loss at Various Injection Energies”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B01, pp. 2402-2404.
[n] R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
[n] V. M. Biryukov et al., “A Study of the RHIC Crystal Collimation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP37C, pp. 2146-2148.
[n] X. C. Kong et al., “The CSNS Controls Plan”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB15, pp. 196-198.
[n] F. Christie, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Generation of Ultra-Short Electron Bunches and FEL Pulses and Characterization of Their Longitudinal Properties at FLASH2”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2600-2603. doi:10.18429/JACoW-IPAC2017-WEPAB017
[n] H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
[n] W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
[n] F. Marti et al., “High Intensity Operation of a Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-03, pp. 45-48.
[n] W. Zhang et al., “Pulsed Systems for eRHIC Beam Injection and Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2410-2412. doi:10.18429/JACoW-IPAC2018-WEPMF020
[n] Y. Li, D. Jia, S. Xue, M. Zhang, and W. Zhu, “A High Heat Load Front-End for the Superconducting Wiggler Beamline at SSRF”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 327-329. doi:10.18429/JACoW-MEDSI2016-WEPE07
[n] H. Sako, M. Ikegami, T. Morishita, and S. Sato, “Configuration of Beam Profile Monitors for Energy Upgraded J-PARC Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP061, pp. 3847-3849.
[n] J. Pfingstner, E. Adli, E. Marin, and S. Reiche, “Design of a Terahertz Radiation Source for Pump-Probe Experiments”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4073-4076. doi:10.18429/JACoW-IPAC2018-THPMF016
[n] Z. He et al., “Control Systems for Spallation Target in China Initiative Accelerator Driven System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1147-1150. doi:10.18429/JACoW-ICALEPCS2015-THHD3O01
[n] H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
[n] A. A. Mikhailichenko, “Space Charge Effects in Diluted Beam”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA106, pp. 3636-3638.
[n] X. D. He, S. Dong, G. Feng, Y. J. Pei, and C.-F. Wu, “Development of an X-band Hybrid Dielectric-iris-loaded Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP083, pp. 2713-2715.
[n] J. Popielarski et al., “FRIB Technology Demonstration Cryomodule Test”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB090, pp. 386-388.
[n] G. Jackson, “Commercial Production and Use of Antiprotons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper FRXGB003, pp. 119-123.
[n] E. Takeshita et al., “Semi-nondestructive Monitoring System for High-energy Beam Transport Line at HIMAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD055, pp. 3218-3220.
[n] Z. P. Li, S. Dong, X. D. He, and C.-F. Wu, “Development of X-band Photonic Band Gap Accelerating Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP103, pp. 3041-3043.
[n] F. Meng, A. Romanenko, and Y. Xie, “Thermal Simulations for the Multi-Layer Coating Model”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP090, pp. 674-677.
[n] F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
[n] P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 52-55. doi:10.18429/JACoW-FLS2018-TUP2WD04
[n] E. Allaria et al., “Non-Standard Use of Laser Heater for FEL Control and THz Generation”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 566-568. doi:10.18429/JACoW-FEL2017-THB02
[n] J. Norem et al., “The Proton Driver for the $mumu$ Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W025, pp. 399-401.
[n] A. M. Lombardi, “The LINAC4 Project”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. XX-XX. doi:10.18429/JACoW-HB2016-MOAM2P20
For LaTeX
Use Complete Form
For BibTeX
References
- T. A. Miller et al., “Design and Performance of the Biased Drift Tube System in the BNL Electron Lens”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF31, pp. 291-294.
- R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2752-2754.
- A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, M. Shirakata, and M. Uota, “Radiation and Residual Dose Rate Induced by the Beam Loss at Various Injection Energies”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B01, pp. 2402-2404.
- R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
- V. M. Biryukov et al., “A Study of the RHIC Crystal Collimation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP37C, pp. 2146-2148.
- X. C. Kong et al., “The CSNS Controls Plan”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB15, pp. 196-198.
- F. Christie, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Generation of Ultra-Short Electron Bunches and FEL Pulses and Characterization of Their Longitudinal Properties at FLASH2”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2600-2603.
- H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
- W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
- F. Marti et al., “High Intensity Operation of a Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-03, pp. 45-48.
- W. Zhang et al., “Pulsed Systems for eRHIC Beam Injection and Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2410-2412.
- Y. Li, D. Jia, S. Xue, M. Zhang, and W. Zhu, “A High Heat Load Front-End for the Superconducting Wiggler Beamline at SSRF”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 327-329.
- H. Sako, M. Ikegami, T. Morishita, and S. Sato, “Configuration of Beam Profile Monitors for Energy Upgraded J-PARC Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP061, pp. 3847-3849.
- J. Pfingstner, E. Adli, E. Marin, and S. Reiche, “Design of a Terahertz Radiation Source for Pump-Probe Experiments”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4073-4076.
- Z. He et al., “Control Systems for Spallation Target in China Initiative Accelerator Driven System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1147-1150.
- H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
- A. A. Mikhailichenko, “Space Charge Effects in Diluted Beam”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA106, pp. 3636-3638.
- X. D. He, S. Dong, G. Feng, Y. J. Pei, and C.-F. Wu, “Development of an X-band Hybrid Dielectric-iris-loaded Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP083, pp. 2713-2715.
- J. Popielarski et al., “FRIB Technology Demonstration Cryomodule Test”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB090, pp. 386-388.
- G. Jackson, “Commercial Production and Use of Antiprotons”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper FRXGB003, pp. 119-123.
- E. Takeshita et al., “Semi-nondestructive Monitoring System for High-energy Beam Transport Line at HIMAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD055, pp. 3218-3220.
- Z. P. Li, S. Dong, X. D. He, and C.-F. Wu, “Development of X-band Photonic Band Gap Accelerating Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP103, pp. 3041-3043.
- F. Meng, A. Romanenko, and Y. Xie, “Thermal Simulations for the Multi-Layer Coating Model”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP090, pp. 674-677.
- F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
- P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 52-55.
- E. Allaria et al., “Non-Standard Use of Laser Heater for FEL Control and THz Generation”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 566-568.
- J. Norem et al., “The Proton Driver for the $mumu$ Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W025, pp. 399-401.
- A. M. Lombardi, “The LINAC4 Project”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. XX-XX.
Back to search