Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 627-632. doi:10.18429/JACoW-ICALEPCS2017-TUPHA091
[n] C. Boehme, B. Cheymol, I. Dolenc Kittelmann, H. Hassanzadegan, and A. Jansson, “Beam Instrumentation in the ESS Cold Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC06, pp. 667-669.
[n] D. Xie, W. Lu, X. Z. Zhang, and H. W. Zhao, “Design Study of a Higher Magnetic Field SC ECRIS at IMP”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK03, pp. 30-32.
[n] U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 269-272.
[n] B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1260-1264. doi:10.18429/JACoW-NAPAC2016-THB3IO01
[n] P. Clout, S. Bair, A. Conley, R. Ford, M. Fuka, and N. Greene, “The Proton Storage Ring Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2305-2308.
[n] A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457.
[n] P. K. Skowronski, E. Forest, F. Schmidt, and R. de Maria, “New Developments of MAD-X UsingPTC”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP12, pp. 209-212.
[n] T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1352-1355.
[n] Y. Zhang and J. Qiang, “Impact Simulation and the SNS Linac Beam”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB02, pp. 190-193.
[n] A. S. Smygacheva, Ye. Fomin, and V. Korchuganov, “Magnets Design for 2.5 GeV Booster Synchrotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 386-389. doi:10.18429/JACoW-RuPAC2021-WEPSC20
[n] J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
[n] J. Bernardini, M. Parise, and D. Passarelli, “Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 746-749. doi:10.18429/JACoW-SRF2023-WEPWB068
[n] Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
[n] A. Luchetta, O. Barana, A. Barbalace, G. Manduchi, A. Soppelsa, and C. Taliercio, “Control and Data Acquisition for the ITER Ion Source Test Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP087, pp. 281-283.
[n] M.-E. Couprie et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP011, pp. XX-XX.
[n] M. Sch?â, S. Bondorf, and M. Kreider, “Verification of the FAIR Control System Using Deterministic Network Calculus”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 238-244. doi:10.18429/JACoW-ICALEPCS2017-TUCPL06
[n] W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 122-125. doi:10.18429/JACoW-IBIC2018-MOPC04
[n] D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair, F. W. Wise, and S. Zhou, “The Laser System for the ERL Electron Source at Cornell University”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS044, pp. 530-532.
[n] K. Bongardt et al., “The COSY Lattice”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1491-1494.
[n] V. L. Uvarov et al., “A Beam Monitoring & Calibration System for High-Power Electron Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P056, pp. 2229-2231.
[n] D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2168-2171.
[n] M. Herbert, J. Enders, M. Engart, M. Meier, J. Schulze, and V. Wende, “Empirical modeling of the photocurrent time-dependence in co-deposition activation procedures for GaAs photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 656-659. doi:10.18429/JACoW-IPAC2024-MOPR86
[n] Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
[n] P. Li et al., “Pressure Profiles Calculation for the CSRm and BRing”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 62-64. doi:10.18429/JACoW-HB2016-MOPR008
[n] W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
[n] D. Tommasini and P. Tosolini, “High Current, High Voltage Pulser for the ELETTRA Kicker Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1606-1609.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 627-632.
- C. Boehme, B. Cheymol, I. Dolenc Kittelmann, H. Hassanzadegan, and A. Jansson, “Beam Instrumentation in the ESS Cold Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC06, pp. 667-669.
- D. Xie, W. Lu, X. Z. Zhang, and H. W. Zhao, “Design Study of a Higher Magnetic Field SC ECRIS at IMP”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK03, pp. 30-32.
- U. Wienands and R. V. Servranckx, “Towards a Slow Extraction System for the Triumf Kaon Factory Extender Ring with 0.1% Losses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 269-272.
- B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1260-1264.
- P. Clout, S. Bair, A. Conley, R. Ford, M. Fuka, and N. Greene, “The Proton Storage Ring Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2305-2308.
- A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457.
- P. K. Skowronski, E. Forest, F. Schmidt, and R. de Maria, “New Developments of MAD-X UsingPTC”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP12, pp. 209-212.
- T. Ludwig et al., “Measurement of H2 Stripping Cross Sections in Carbon and Aluminium Foils (with some additional data for AL203)”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1352-1355.
- Y. Zhang and J. Qiang, “Impact Simulation and the SNS Linac Beam”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB02, pp. 190-193.
- A. S. Smygacheva, Ye. Fomin, and V. Korchuganov, “Magnets Design for 2.5 GeV Booster Synchrotron”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 386-389.
- J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
- J. Bernardini, M. Parise, and D. Passarelli, “Characterization of Additive Manufacturing Materials for String Assembly in Cleanroom”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB068, pp. 746-749.
- Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
- A. Luchetta, O. Barana, A. Barbalace, G. Manduchi, A. Soppelsa, and C. Taliercio, “Control and Data Acquisition for the ITER Ion Source Test Facility”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP087, pp. 281-283.
- M.-E. Couprie et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP011, pp. XX-XX.
- M. Sch?â, S. Bondorf, and M. Kreider, “Verification of the FAIR Control System Using Deterministic Network Calculus”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 238-244.
- W. L. Huang, F. Li, L. Ma, S. Wang, and T. G. Xu, “Beam Charge Measurement and System Calibration in CSNS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 122-125.
- D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair, F. W. Wise, and S. Zhou, “The Laser System for the ERL Electron Source at Cornell University”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS044, pp. 530-532.
- K. Bongardt et al., “The COSY Lattice”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1491-1494.
- V. L. Uvarov et al., “A Beam Monitoring & Calibration System for High-Power Electron Linacs”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P056, pp. 2229-2231.
- D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2168-2171.
- M. Herbert, J. Enders, M. Engart, M. Meier, J. Schulze, and V. Wende, “Empirical modeling of the photocurrent time-dependence in co-deposition activation procedures for GaAs photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR86, pp. 656-659.
- Yuri K. Batygin, “Halo-Free Beam Transport in Nonlinear Focusing Channel”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E201, pp. 611-613.
- P. Li et al., “Pressure Profiles Calculation for the CSRm and BRing”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 62-64.
- W. J. Starling and T. Cain, “Superconducting Super Collider Laboratory Coupled-Cavity Linac Mechanical Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-69, pp. 241-243.
- D. Tommasini and P. Tosolini, “High Current, High Voltage Pulser for the ELETTRA Kicker Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1606-1609.
Back to search