Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Ch. Magne et al., “Measurement with Beam of the Deflecting Higher Order Modes in the TTF Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH044, pp. 3771-3773.
[n] Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
[n] T. Enegren, L. Durieu, D. Michelson, and R. E. Worsham, “Development of Flat-Topped RF Voltage for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2936-2939.
[n] N. Nakamura, “Effects of Longitudinal and Transverse Resistive-Wall Wakefields on ERLs”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper JS205, pp. 85-89.
[n] M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 62-64. doi:10.18429/JACoW-LINAC2018-MOPO010
[n] D. H. An et al., “The Study Of The Central Region Of Kirams-30 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 397-399.
[n] T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 52-57. doi:10.18429/JACoW-ERL2015-WEIALH2048
[n] J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3345-3347. doi:10.18429/JACoW-IPAC2024-THPG38
[n] G. Decker and J. M. Wang, “Transverse Beam Break Up in a Periodic Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1210-1213.
[n] R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1321-1324.
[n] A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR88, unpublished.
[n] F. Wulf and M. K?Ârfer, “Local Beam Loss and Beam Profile Monitoring with Optical Fibers”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOA01, pp. 411-417.
[n] Y. L. Lv et al., “Design and Construction Progress of Cyclotron Based Proton Irradiation Facility for Space Science”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 230-232. doi:10.18429/JACoW-CYCLOTRONS2019-TUP031
[n] J. Tan, “Field Emission Studies at Saclay and Orsay”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B04, pp. 105-117.
[n] L. Carver, P. Alexandre, N. Carmignani, S. Habet, L. Nadolski, and S. White, “Beam loss scenarios for the SOLEIL II upgrade”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS049, unpublished.
[n] Y. Kim, M. Dohlus, K. Floettmann, T. Limberg, and D. Son, “Injector and Bunch Compressor for the European XFEL Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF018, pp. 342-344.
[n] N. Simos et al., “Study of Grapite Targets Interacting with the 24 GeV Proton Beam of the BNL Muon Target Experiment”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO024, pp. 2709-2711.
[n] M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 466-469.
[n] G. Gold, V. Sabaiduc, J. Zhu, J. Panama, and L. AC. Piazza, “Resonator System for the BCSI Test Stand Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT025, pp. 206-208.
[n] C. C. Lo, B. Taylor, and K. Baptiste, “The Amplitude and Phase Control of the ALS Storage Ring RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR03, pp. 801-803.
[n] P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
[n] D. Brandt, O. Groebner, J. M. Jowett, T. M. Taylor, and T. Tortschanoff, “The Polarization Wigglers in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 649-652.
[n] D. Gorelov, D. Johnson, and F. Marti, “NORTICA ÔÇô A New Code for Cyclotron Analysis”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-12, pp. XX-XX.
[n] Y. S. Wong, C. Y. Liu, K.-B. Liu, and B. S. Wang, “Switching Power Supply Automatic Test System in Taiwan Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3580-3582. doi:10.18429/JACoW-IPAC2017-WEPVA132
[n] A. Oguz, N. Evans, and W. Blokland, “Spatio-temporal measurements of stripper foil temperatures at 1.7 MW H⁻ beam power at the SNS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2925-2928. doi:10.18429/JACoW-IPAC2024-THAD3
[n] A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
[n] K. Baptiste, “RF Power Detector/Monitor Upgrade for the 500MHz Systems at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB027, pp. 1252-1254.
[n] J. M. Lef?¿bvre and M. Prom?®, “Operation Report of the SATURNE Linac Injector Space Charge Computation Results”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper A-3, pp. 29-33.
[n] S. Kwiatkowski, T. Enegren, and R. L. Poirier, “Design of the 150 kW, 46-62 MNz Power Amplifier for the TRIUMF Kaon Factory Booster Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1220-1223.
[n] S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
[n] M. Cavenago, M. Comunian, E. Fagotti, T. Kulevoy, S. Petrenko, and M. Poggi, “High Current Ion Sources, Beam Diagnostics and Emittance Measurement”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-06, pp. 341-345.
For LaTeX
Use Complete Form
For BibTeX
References
- Ch. Magne et al., “Measurement with Beam of the Deflecting Higher Order Modes in the TTF Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH044, pp. 3771-3773.
- Q. A. Kerns, G. H. Biallas, F. Turkot, R. C. Webber, and A. Wehmann, “An R.F. Device for Precision Location of the Beam Position Detectors in the Energy Saver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2250-2253.
- T. Enegren, L. Durieu, D. Michelson, and R. E. Worsham, “Development of Flat-Topped RF Voltage for TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2936-2939.
- N. Nakamura, “Effects of Longitudinal and Transverse Resistive-Wall Wakefields on ERLs”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper JS205, pp. 85-89.
- M. A. Nozdrin et al., “JINR Photocathode Research: Status and Plans”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 62-64.
- D. H. An et al., “The Study Of The Central Region Of Kirams-30 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 397-399.
- T. A. Miller et al., “Current Measurement and Associated Machine Protection in the ERL at BNL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 52-57.
- J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG38, pp. 3345-3347.
- G. Decker and J. M. Wang, “Transverse Beam Break Up in a Periodic Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1210-1213.
- R. L. Poirier, I. Enchevich, T. Enegren, and S. J. Mai, “Parallel Bias vs Perpendicular Bias of a Ferrite Tuned Cavity for the TRIUMF KAON-Factory Bosster Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1321-1324.
- A. C. Araujo Martinez et al., “Fabrication of 1.3 GHz Nb cavities at RadiaBeam”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR88, unpublished.
- F. Wulf and M. K?Ârfer, “Local Beam Loss and Beam Profile Monitoring with Optical Fibers”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOA01, pp. 411-417.
- Y. L. Lv et al., “Design and Construction Progress of Cyclotron Based Proton Irradiation Facility for Space Science”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 230-232.
- J. Tan, “Field Emission Studies at Saclay and Orsay”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B04, pp. 105-117.
- L. Carver, P. Alexandre, N. Carmignani, S. Habet, L. Nadolski, and S. White, “Beam loss scenarios for the SOLEIL II upgrade”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS049, this conference.
- Y. Kim, M. Dohlus, K. Floettmann, T. Limberg, and D. Son, “Injector and Bunch Compressor for the European XFEL Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF018, pp. 342-344.
- N. Simos et al., “Study of Grapite Targets Interacting with the 24 GeV Proton Beam of the BNL Muon Target Experiment”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO024, pp. 2709-2711.
- M. Hara et al., “Storage Ring Design of SPring-8, 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 466-469.
- G. Gold, V. Sabaiduc, J. Zhu, J. Panama, and L. AC. Piazza, “Resonator System for the BCSI Test Stand Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT025, pp. 206-208.
- C. C. Lo, B. Taylor, and K. Baptiste, “The Amplitude and Phase Control of the ALS Storage Ring RF System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR03, pp. 801-803.
- P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
- D. Brandt, O. Groebner, J. M. Jowett, T. M. Taylor, and T. Tortschanoff, “The Polarization Wigglers in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 649-652.
- D. Gorelov, D. Johnson, and F. Marti, “NORTICA ÔÇô A New Code for Cyclotron Analysis”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-12, pp. XX-XX.
- Y. S. Wong, C. Y. Liu, K.-B. Liu, and B. S. Wang, “Switching Power Supply Automatic Test System in Taiwan Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3580-3582.
- A. Oguz, N. Evans, and W. Blokland, “Spatio-temporal measurements of stripper foil temperatures at 1.7 MW H⁻ beam power at the SNS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THAD3, pp. 2925-2928.
- A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
- K. Baptiste, “RF Power Detector/Monitor Upgrade for the 500MHz Systems at the ALS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB027, pp. 1252-1254.
- J. M. Lef?¿bvre and M. Prom?®, “Operation Report of the SATURNE Linac Injector Space Charge Computation Results”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper A-3, pp. 29-33.
- S. Kwiatkowski, T. Enegren, and R. L. Poirier, “Design of the 150 kW, 46-62 MNz Power Amplifier for the TRIUMF Kaon Factory Booster Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1220-1223.
- S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
- M. Cavenago, M. Comunian, E. Fagotti, T. Kulevoy, S. Petrenko, and M. Poggi, “High Current Ion Sources, Beam Diagnostics and Emittance Measurement”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-06, pp. 341-345.
Back to search