JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Raut, T. Ganey, T. Powers, I. Senevirathne, and P. Dhakal, “Development of a plasma simulation tool for accelerating cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2822-2824. doi:10.18429/JACoW-IPAC2024-WEPS57
[n]	C. B. Schroeder, E. Esarey, C. G. R. Geddes, W. Leemans, and C. T??th, “Laser-Plasma-Accelerator-Based   Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP078, pp. 2979-2981. 
[n]	I. Senevirathne, N. Raut, and T. Powers, “Plasma processing of SRF cavities at Jefferson Lab: Experiment results and simulation insight”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 816-820. doi:10.18429/JACoW-NAPAC2025-WEP066
[n]	P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770. 
[n]	E. Keil and A. M. Sessler, “Muon Acceleration in FFAG Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAB010, pp. 414-416. 
[n]	G. Olry et al., “Tests Results of the Beta 0.07 and Beta 0.12 Quarter Wave Resonators for the SPIRAL2 Superconducting Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH145, pp. 393-395. 
[n]	S. Di Mitri and A. Zholents, “Trajectory Correction in the Fermi@Elettra Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC010, pp. 2993-2995. 
[n]	L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183. 
[n]	M. Chung, R. C. Davidson, P. Efthimion, E. P. Gilson, and R. M. Majeski, “Initial Density Profile Measurements using a Laser-Induced Fluorescence Diagnostic in the Paul Trap Simulator Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS080, pp. 3666-3668. 
[n]	M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX. 
[n]	F. Albert et al., “Niobium Surface Defect Induced by Strong Electric Field Probed by Soft X-Ray Laser Interferometry”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D09, pp. 873-880. 
[n]	V. Khodnevych et al., “Study of a Smith-Purcell Radiation-Based Longitudinal Profile Monitor at the CLIO Free Electron Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 132-134. doi:10.18429/JACoW-IPAC2017-MOPAB026
[n]	N. Tokuda et al., “RFQ Linac for the Numatron Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3510-3513. 
[n]	D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2168-2171. 
[n]	R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068. 
[n]	D. Price, G. Frazier, R. Genuario, and R. Miller, “High Current RF Accelerator for FEL Applications”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 941-944. 
[n]	L. K. Spentzouris, D. O. McCarron, W. Pellico, P. Spentzouris, E. G. Stern, and R. E. Tomlin, “Intensity Dependent Beam Dynamics Studies in the Fermilab Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP069, pp. 4692-4694. 
[n]	R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816. 
[n]	A. Chanc?® et al., “Development of an Injector and a Magnetic Transfer Line in the Framework of Cilex”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2545-2547. doi:10.18429/JACoW-IPAC2016-WEPMY004
[n]	E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 752-755. doi:10.18429/JACoW-IPAC2025-MOPS061
[n]	M. Hostettler and G. Papotti, “Luminosity Lifetime at the LHC in 2012 Proton Physics Operation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI029, pp. 1403-1405. 
[n]	C. M. Ankenbrandt et al., “Intense Muon Beams for Experiments at Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP249, pp. 1951-1953. 
[n]	D. D. Cosic and M. Vi, “Experiment Automation Using EPICS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 625-627. doi:10.18429/JACoW-ICALEPCS2021-WEPV005
[n]	P. Li, Z. Dong, M. Li, J. C. Yang, and L. H. J. Bozyk, “Dynamic Vacuum Simulation for the BRing”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 186-188. doi:10.18429/JACoW-HB2018-TUP2WA04
[n]	L. Ives et al., “10 MW, 91 GHz Gyroklystron for High Freqency Accelerator Research”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE018, pp. 1119-1121. 
[n]	U. Trinks, “New Trends in Cyclotrons”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 295-300. 
[n]	L. Li et al., “Field Measurement of the Quadrupole Magnet for CSNS/RCS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1265-1267. doi:10.18429/JACoW-IPAC2014-TUPRO096
[n]	A. Miura, K. Okabe, M. Yoshimoto, and I. Yamane, “Multi-Laser-Wire Diagnostic for the Beam Profile Measurement of a Negative Hydrogen Ion Beam in the J-PARC LINAC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 856-859. doi:10.18429/JACoW-IBIC2016-THAL03
[n]	A. A. Zavadtsev, L. V. Kravchuk, S. V. Kutsaev, and D. A. Zavadtsev, “Solid State High Power RF System for Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP090, pp. 1042-1044. 
[n]	A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n]	Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006. 
[n]	N. R. Lobanov, G. S. Foote, and D. C. Weisser, “Report on Superconducting RF Activities at ANU”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP28, pp. 525-527. 
[n]	F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n]	C. Muehle, “Fast-Pulsed Superconducting Magnets”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAY06, pp. 324-328. 
[n]	G. Papotti, A. A. Gorzawski, M. Hostettler, and R. Schmidt, “Beam Losses Through the LHC Operational Cycle in 2012”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI028, pp. 1400-1402. 
[n]	R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138. 
[n]	N. R. Lobanov and D. C. Weisser, “Lead Plating: ANU SLRs Upgrade”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP003, pp. 129-142. 
[n]	D. Horan, B. Brajuskovic, J. T. Collins, L. H. Morrison, and G. J. Waldschmidt, “352-MHz Solid-State RF Power System Development at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP078, pp. 1008-1010. 
[n]	D. C. Weisser, “Present and Future of Electrostatic Accelerators”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-01, pp. 26-30. 
[n]	J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n]	L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 477-481. doi:10.18429/JACoW-IBIC2018-WEPB18
[n]	B. Xiao, M. J. Kelley, H. L. Phillips, C. E. Reece, and T. Tajima, “RF Surface Impedance of MgB2 Thin Films at 7.5 GHz”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO048, pp. 838-840. 
[n]	J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01

For LaTeX

Use Complete Form

For BibTeX

References

Back to search