Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 485-488.
[n] D. A. Walsh, W. A. Gillespie, and S. P. Jamison, “A Femtosecond Resolution Electro-optic Diagnostic Using a Nanosecond-pulse Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO89, pp. 447-451.
[n] M. Baldini et al., “First results of AUP Nb3Sn quadrupole horizontal tests”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2943-2947. doi:10.18429/JACoW-IPAC2024-THYN1
[n] J. A. Clarke et al., “High Resolution Stabilisation of Vertical Photon Beam Position in SRS Beam Lines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 125-128.
[n] P. D. Quinn, “Status Report on Operation of the Daresbury SRS after Recent Additions and Upgrades”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 591-594.
[n] N. K. Mahale and A. Maschke, “Longitudinal Matching Between the LEB and the MEB for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 389-392.
[n] S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3544-3546. doi:10.18429/JACoW-IPAC2017-WEPVA116
[n] J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
[n] F.-Y. Lin, C.-H. Chang, H.-H. Chen, T.-C. Fan, M.-H. Huang, and C.-S. Hwang, “Auto-filling Cryogenic System for Superconducting Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF054, pp. 1726-1728.
[n] G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1084-1087.
[n] J. L. Gonzalez, E. Calvo Giraldo, D. Cocq, and O. R. Jones, “The Measurement of Beam Intensity using the LHC BPM System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD09, pp. 62-64.
[n] K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
[n] M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
[n] J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
[n] A. Knyazik, E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Orbital Angular Momentum Light Generated via FEL at NLCTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP164, pp. 2420-2422.
[n] S. Greenwald, G. Kerslick, and J. A. Nation, “Space-Charge Wavegrowth and Propagation on a Relativistic Electron Beam”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3497-3500.
[n] Evans K.Jr., “An Overview of MEDM”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P64, pp. XX-XX.
[n] J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
[n] G. M. Mitsuka et al., “Beam Instrumentation at SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 169. doi:10.18429/JACoW-eeFACT2018-TUPBB05
[n] J. J. Burgerjon, F. Konopasek, and K. G. Standing, “Magnetic Field Control in the Manitoba Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 334-338.
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] S. D?Âbert et al., “S-DALINAC Status Report”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A11, pp. 57-59.
[n] J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n] X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 831-834. doi:10.18429/JACoW-IPAC2017-MOPIK125
[n] A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
[n] S. Y. Zhang and W. T. Weng, “Evaluating Impedances in a Sacherer Integral Equation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1105-1108.
[n] J. C. Huang, C.-H. Chang, and C.-S. Hwang, “The Effect of Eddy Currents on the Homogeneity of the Magnetic Field of a Booster-Ring Sextupole Magnet”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP027, pp. 193-195.
[n] K. Hatanaka et al., “RCNP Cyclotron Facility”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-09, pp. 64-68.
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
[n] P. Lapostolle, E. Tanke, S. R. Valero, M. J. Vretenar, and D. J. Warner, “Computer Design and Dynamics of the Quasi-Alvarez Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO421, pp. 99-101.
For LaTeX
Use Complete Form
For BibTeX
References
- L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 485-488.
- D. A. Walsh, W. A. Gillespie, and S. P. Jamison, “A Femtosecond Resolution Electro-optic Diagnostic Using a Nanosecond-pulse Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO89, pp. 447-451.
- M. Baldini et al., “First results of AUP Nb3Sn quadrupole horizontal tests”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THYN1, pp. 2943-2947.
- J. A. Clarke et al., “High Resolution Stabilisation of Vertical Photon Beam Position in SRS Beam Lines”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 125-128.
- P. D. Quinn, “Status Report on Operation of the Daresbury SRS after Recent Additions and Upgrades”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 591-594.
- N. K. Mahale and A. Maschke, “Longitudinal Matching Between the LEB and the MEB for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 389-392.
- S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3544-3546.
- J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529.
- F.-Y. Lin, C.-H. Chang, H.-H. Chen, T.-C. Fan, M.-H. Huang, and C.-S. Hwang, “Auto-filling Cryogenic System for Superconducting Wiggler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF054, pp. 1726-1728.
- G. P. Benincasa et al., “Modulation of the Lepton Production for the CERN LEP Pre-Injector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1084-1087.
- J. L. Gonzalez, E. Calvo Giraldo, D. Cocq, and O. R. Jones, “The Measurement of Beam Intensity using the LHC BPM System”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD09, pp. 62-64.
- K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
- M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378.
- J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
- A. Knyazik, E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Orbital Angular Momentum Light Generated via FEL at NLCTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP164, pp. 2420-2422.
- S. Greenwald, G. Kerslick, and J. A. Nation, “Space-Charge Wavegrowth and Propagation on a Relativistic Electron Beam”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3497-3500.
- Evans K.Jr., “An Overview of MEDM”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P64, pp. XX-XX.
- J. Campmany, D. Einfeld, J. Marcos, and V. Massana, “General description of IDs initially installed at ALBA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA055, pp. 2609-2611.
- G. M. Mitsuka et al., “Beam Instrumentation at SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 169.
- J. J. Burgerjon, F. Konopasek, and K. G. Standing, “Magnetic Field Control in the Manitoba Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 334-338.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- S. D?Âbert et al., “S-DALINAC Status Report”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A11, pp. 57-59.
- J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 304-308.
- X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 831-834.
- A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
- S. Y. Zhang and W. T. Weng, “Evaluating Impedances in a Sacherer Integral Equation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1105-1108.
- J. C. Huang, C.-H. Chang, and C.-S. Hwang, “The Effect of Eddy Currents on the Homogeneity of the Magnetic Field of a Booster-Ring Sextupole Magnet”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP027, pp. 193-195.
- K. Hatanaka et al., “RCNP Cyclotron Facility”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-09, pp. 64-68.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
- P. Lapostolle, E. Tanke, S. R. Valero, M. J. Vretenar, and D. J. Warner, “Computer Design and Dynamics of the Quasi-Alvarez Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO421, pp. 99-101.
Back to search