Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. C. Lampel, W. B. Herrmannsfeldt, R. E. Rand, and D. Y. Wang, “Sensitivity of Perveance to Cathode Placement in a Low Perveance Electron Gun”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1776-1779.
[n] S. Peng, L. T. Hoff, and K. Smith, “The SNS Ring LLRF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT066, pp. 3697-3699.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
[n] S. Thorin et al., “Design of the MAX IV Ring Injector and SPF/FEL Driver”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP178, pp. 2447-2449.
[n] K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
[n] D. T. Abell and F. Meot, “New Algorithms in Zgoubi”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3418-3421. doi:10.18429/JACoW-IPAC2018-THPAK079
[n] M. Gasior, J. Olexa, and R. J. Steinhagen, “A High-resolution Diode-based Orbit Measurement System ÔÇô Prototype Results from the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD24, pp. 98-100.
[n] G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
[n] T. Asaka, H. Tanaka, Y. Otake, and T. Taniuchi, “Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 949-951. doi:10.18429/JACoW-LINAC2018-THPO124
[n] K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
[n] M. Schillo et al., “A Beam Diagnostic System for ELSA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1543-1546.
[n] S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
[n] S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
[n] D. Filippetto et al., “Infrared Single Spike Pulses Generation Using a Short Period Superconducting Tape Undulator at APEX”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC14, pp. 129-132.
[n] M. Chen et al., “Ionization-Induced Trapping in Laser-Plasma Accelerators and Synchrotron Radiation from the Betatron Oscillation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP159, pp. 394-396.
[n] M. Komiyama, M. Fujimaki, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Update of the RIKEN RI Beam Factory Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 427-430. doi:10.18429/JACoW-ICALEPCS2017-TUPHA028
[n] B. Steffen et al., “Electro-Optical Bunch Length Detection at the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 360-363. doi:10.18429/JACoW-FEL2019-WEP015
[n] E. Chiadroni, M. Castellano, A. Cianchi, K. Honkavaara, and G. Kube, “New Experimental Results with Optical Diffraction Radiation Diagnostics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC018, pp. 1083-1085.
[n] A. Moretti et al., “The Design of a 12.5-MHz Wider?Âe Linac for Ion Beam Fusion”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-5, pp. 152-158.
[n] A. Bosco, G. A. Blair, S. T. Boogert, and G. E. Boorman, “An Ultrafast Laser-Wire Scanner Based on Electro-Optics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP026, pp. 4006-4008.
[n] D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
[n] S. Y. Lee and J. Wei, “Nonlinear Synchrotron Motion Near Transition Energy in RHIC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 764-767.
[n] V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
[n] R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n] B. Mukherjee, “Utilisation of the Stray Neutron Field Produced by a Compact Medical Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-23, pp. 97-100.
[n] R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
[n] Y. Liu, M. Chen, D. Li, S. Wang, G. S. Chen, and W. Jia, “The Status of SMCAMS after Upgradings”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19003, pp. XX-XX.
[n] T. Mochizuki et al., “Direct LN2 Cooled Double Crystal Monochromator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 406-408. doi:10.18429/JACoW-MEDSI2018-THPH33
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] H. Zen et al., “Cavity Detuning Method to Compensate Beam Energy Decrement in Thermionic RF Gun due to Back-bombardment Effect”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC008, pp. 1725-1727.
[n] M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3024-3027. doi:10.18429/JACoW-IPAC2016-WEPOY021
[n] F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-01, pp. 447-453.
[n] A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
For LaTeX
Use Complete Form
For BibTeX
References
- M. C. Lampel, W. B. Herrmannsfeldt, R. E. Rand, and D. Y. Wang, “Sensitivity of Perveance to Cathode Placement in a Low Perveance Electron Gun”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1776-1779.
- S. Peng, L. T. Hoff, and K. Smith, “The SNS Ring LLRF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT066, pp. 3697-3699.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- J. Wei et al., “RHIC Sextant Test - Physics and Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B006, pp. 69-71.
- S. Thorin et al., “Design of the MAX IV Ring Injector and SPF/FEL Driver”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP178, pp. 2447-2449.
- K. L. F. Bane, M. Benedikt, A. Grudiev, E. Mahner, G. V. Stupakov, and U. Wienands, “Impedance Considerations for the Design of the Vacuum System of the CERN PS2 Proton Synchrotron”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD017, pp. 708-710.
- D. T. Abell and F. Meot, “New Algorithms in Zgoubi”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3418-3421.
- M. Gasior, J. Olexa, and R. J. Steinhagen, “A High-resolution Diode-based Orbit Measurement System ÔÇô Prototype Results from the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD24, pp. 98-100.
- G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832.
- T. Asaka, H. Tanaka, Y. Otake, and T. Taniuchi, “Design of Pulsed HV and RF Combined Gun System Using Gridded Thermionic-Cathode”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 949-951.
- K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
- M. Schillo et al., “A Beam Diagnostic System for ELSA”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1543-1546.
- S. Mahalingam, J. R. Cary, P. Stoltz, and S. A. Veitzer, “Modeling Breakdown in RF Cavities Using Particle-in-cell (PIC) codes”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP111, pp. 2767-2769.
- S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
- D. Filippetto et al., “Infrared Single Spike Pulses Generation Using a Short Period Superconducting Tape Undulator at APEX”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPC14, pp. 129-132.
- M. Chen et al., “Ionization-Induced Trapping in Laser-Plasma Accelerators and Synchrotron Radiation from the Betatron Oscillation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP159, pp. 394-396.
- M. Komiyama, M. Fujimaki, N. Fukunishi, A. Uchiyama, M. Hamanaka, and T. Nakamura, “Recent Update of the RIKEN RI Beam Factory Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 427-430.
- B. Steffen et al., “Electro-Optical Bunch Length Detection at the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 360-363.
- E. Chiadroni, M. Castellano, A. Cianchi, K. Honkavaara, and G. Kube, “New Experimental Results with Optical Diffraction Radiation Diagnostics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC018, pp. 1083-1085.
- A. Moretti et al., “The Design of a 12.5-MHz Wider?Âe Linac for Ion Beam Fusion”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-5, pp. 152-158.
- A. Bosco, G. A. Blair, S. T. Boogert, and G. E. Boorman, “An Ultrafast Laser-Wire Scanner Based on Electro-Optics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP026, pp. 4006-4008.
- D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
- S. Y. Lee and J. Wei, “Nonlinear Synchrotron Motion Near Transition Energy in RHIC”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 764-767.
- V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
- R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2818-2821.
- B. Mukherjee, “Utilisation of the Stray Neutron Field Produced by a Compact Medical Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-23, pp. 97-100.
- R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
- Y. Liu, M. Chen, D. Li, S. Wang, G. S. Chen, and W. Jia, “The Status of SMCAMS after Upgradings”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19003, pp. XX-XX.
- T. Mochizuki et al., “Direct LN2 Cooled Double Crystal Monochromator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 406-408.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- H. Zen et al., “Cavity Detuning Method to Compensate Beam Energy Decrement in Thermionic RF Gun due to Back-bombardment Effect”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC008, pp. 1725-1727.
- M. B. Andorf, P. Piot, V. A. Lebedev, and J. Ruan, “Nonlinear Phase Distortion in a Ti:Sapphire Optical Amplifier for Optical Stochastic Cooling”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3024-3027.
- F. Marti et al., “Beam Dynamics Issues in the NSCL Coupled Cyclotron Upgrade”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-01, pp. 447-453.
- A. C. Morton, “Operational Considerations for Future Multi-user RIB Facilities”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOC03, pp. 41-44.
Back to search