JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Okamoto et al., “Plasma Traps for Space-charge Studies: Status and Perspectives”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1A04, pp. 235-239. 
[n]	Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255. 
[n]	J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196. 
[n]	S. C. Huang and R. L. Geng, “Exploration of Multi-fold Symmetry Element-loaded Superconducting Radio Frequency Structure for Reliable Acceleration of Low- & Medium-Beta Ion Species”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2978-2980. doi:10.18429/JACoW-IPAC2015-WEPMN024
[n]	K. Chow et al., “Design and Fabrication of Racetrack Coil Accelerator Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23F, pp. 2026-2028. 
[n]	R. W. Thomae, J. L. Conradie, D. T. Fourie, and D. Kuchler, “Beam Experiments with the Grenoble Test Electron Cyclotron Resonance Ion Source at iThemba LABS”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP14, pp. 68-70. 
[n]	R. J. Abrams et al., “Non-Magnetic Momentum Spectrometer Based on Fast Time-of-Flight System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP038, pp. 169-171. 
[n]	M. Martino, A. Beloglazov, V. Nassisi, and V. Stagno, “Experimental Characterisations of the Electron Beams Induced by Excimer Lasers on A1 Targets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1474-1477. 
[n]	J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147. 
[n]	D. Yu, D. Newsham, and A. V. Smirnov, “PBG Cavities for Single-Beam and Multi-Beam Electron Devices”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE032, pp. 1153-1155. 
[n]	D. J. Gibson, C. P. J. Barty, M. J. Messerly, M. A. Prantil, and E. Cormier, “A Drive Laser for Multi-bunch Photoinjector Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD060, pp. 2657-2659. 
[n]	M. Yamamoto et al., “Longitudinal Particle Simulation for J-PARC RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP028, pp. 3254-3256. 
[n]	M. Krishnan et al., “Energetic Condensation Growth of Nb Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO069, pp. 396-400. 
[n]	J. N. Bai et al., “Bunch to Bucket Transfer System for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 980-983. doi:10.18429/JACoW-ICALEPCS2015-WEPGF119
[n]	R. Monroy-Villa et al., “Design and Fabrication of a Quadrupole-Resonator for Sample R&D”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 838-841. doi:10.18429/JACoW-SRF2019-THP004
[n]	A. Oppelt et al., “Facility Upgrade at PITZ and First Operation Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1518-1521. doi:10.18429/JACoW-IPAC2015-TUPWA046
[n]	C. M. Gulliford, I. V. Bazarov, J. Dobbins, N. Malitsky, and R. M. Talman, “The NTMAT EPICS-DDS Virtual Accelerator for the Cornell ERL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB022, pp. 2734-2736. 
[n]	S. R. Carriere, D. Beauregard, B. A. Schneider, G. A. Steel, and D. M. Taylor, “A Novel Filter Auto-Mounter for the BioXAS Beamlines at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 357-359. doi:10.18429/JACoW-MEDSI2016-WEPE29
[n]	S. Sakanaka, T. Higo, F. Hinode, K. Kubo, J. Urakawa, and T. Rizawa, “Low-Power Measurement on a HOM Damped Cavity for the ATF Damping Ring”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-87, pp. 281-283. 
[n]	H. Ishizuka, A. Fisher, K. Kamada, R. Prohaska, and N. Rostoker, “Preliminary Experiment on the Electron Beam Extraction from a Stellatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 136-139. 
[n]	H. Lancaster, “An Analytical Solution for the Electrical Properties of a Radio-Frequency Quadrupole (RFQ) with Simple Vanes”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H12, pp. 293-295. 
[n]	G. Meyrand and K. Fujii, “Small Cyclotron for Medical Use: CYPRIS 325”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-11, pp. 137-139. 
[n]	J. P. Perrine, M. Thivent, and F. Voelker, “The Pulsed Power Converter and Septum Magnet System for Injection into the Electron Storage Ring at ESRF”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP028G, pp. 2394-2396. 
[n]	S. Mitsunobu et al., “High Power Input Coupler for KEKB SC Cavity and New 1 MW Test Bench”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP33, pp. 703-705. 
[n]	R. W. Thomae, “Status of New Electron Cyclotron Resonance Ion Sources at iThemba LABS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-04, pp. 68-71. 
[n]	P. Tenenbaum, “Simulation Studies of Main Linac Steering in the Next Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA31, pp. 3459-3461. 
[n]	S. Binello, A. Fernando, R. A. Katz, J. S. Laster, and J. Piacentino, “Operating System Upgrades at RHIC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC024, pp. 1138-1140. 
[n]	G. D'Auria et al., “The New Photoinjector for the Fermi Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN028, pp. 974-976. 
[n]	H. Fitze, M. Bopp, and H. Frei, “Development of a New High Power Cavity for the 590 MeV Ring Cyclotron at PSI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP58, pp. 795-797. 
[n]	M. Schalwat, R. Bandelmann, A. Daniel, N. Krupka, A. Matheisen, and S. T. Sievers, “A New High Resolution Optical System for Inspection of Gun-and Multi-cell Resonators in ISO-4 Cleanrooms”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 47-50. doi:10.18429/JACoW-SRF2017-MOPB003
[n]	P. Martel et al., “Manufacturing and Test Folder:  MTF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO026, pp. 2688-2690. 
[n]	T. Jezynski, M. K. Grecki, W. Jalmuzna, W. Koprek, D. R. Makowski, and S. Simrock, “Acquisition of Analog Signals in ATCA based LLRF Control System for X-FEL”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP051, pp. XX-XX. 
[n]	J. F. DeFord, B. Held, and J. J. Petillo, “Adaptive Mesh Refinement for Particle-Tracking Calculation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS047, pp. 3600-3602. 
[n]	W. B. Sampson, P. F. Dahl, A. D. McInturff, and K. E. Robins, “Performance of Multifilamentary Superconducting Wire in Solenoids and Prototype Synchrotron Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 660-664. 
[n]	D. O. Savu, B. Martin, A. Al-Shabibi, S. M. Batraneanu, S. N. Stancu, and R. Sjoen, “Efficient Network Monitoring for Large Data Acquisition Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU036, pp. 1153-1156. 
[n]	G. B. Christian et al., “The Electromagnetic Background Environment for the Interaction-point Beam Feedback System at the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH089, pp. 2997-2999. 
[n]	C. Fortgang, M. Monroe, D. Prono, C. Hudson, D. Macy, and K. Moy, “The Cathode Test Stand for the DARHT Second-Axis”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4054, pp. 171-173. 
[n]	P. Tenenbaum, H. H. Braun, and F. Chautard, “Nulling Emittance Measurement Technique for CLIC Test Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W017, pp. 479-481. 
[n]	S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 852-854. doi:10.18429/JACoW-LINAC2018-THPO069
[n]	A. Blednykh et al., “NSLS-II BPM System Protection from Rogue Mode Coupling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP192, pp. 450-452. 
[n]	Ch. Schmidt, L. Butkowski, M. Hoffmann, H. Schlarb, M. Grzegrzolka, and I. Rutkowski, “High Performance and Low Latency Single Cavity RF Control Based on MTCA.4”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC122, pp. 1348-1350. 
[n]	R. DiGennaro et al., “The Design of a High Current, High Duty Factor RFQ for the SNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A07, pp. 495-497. 
[n]	W. E. Jule, D. Baggett, P. Wechsler, and R. L. Gluckstern, “Effects of Perturbation in Low  Proton Accelerating Structures”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C04, pp. 129-131. 
[n]	D. J. Ciardullo, E. R. Beadle, and G. A. Smith, “Design of the AGS Booster Beam Position Monitor Electronics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1431-1434. 
[n]	A. Ferrero Colomo et al., “Performance Measurements and Analysis of Jitter Like Events for the PS Injection Kicker System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2549-2552. doi:10.18429/JACoW-IPAC2018-WEPMF075
[n]	L. O. Dallin, I. Blomqvist, E. Hallin, D. S. Lowe, R. M. Silzer, and M. de Jong, “The Canadian Light Source: An Update”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH093, pp. 2680-2682. 
[n]	T. Rizawa and R. Pendleton, “Broadband Coax-Waveguide Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR16, pp. 1824-1826. 
[n]	N. Aftab et al., “Improvements in Longitudinal Phase Space Tomography at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 105-108. doi:10.18429/JACoW-IBIC2022-MOP28
[n]	S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_094. 
[n]	C. Steier et al., “Status of the Low Emittance Upgrade of the Advanced Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA070, pp. 2645-2647. 
[n]	R. Jones, B. Cheo, and J. Shmoys, “Beam Loading and Frequency Detuning in a Linear Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-17, pp. 82-85. 
[n]	B. J. Holzer et al., “Interaction Region Design for a Ring Ring Version of the LHeC Study”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB034, pp. 1596-1598. 
[n]	D. Voulot et al., “HIE-ISOLDE SC Linac: Operational Aspects and Commissioning Preparation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP050, pp. 3853-3855. 
[n]	V. S. Morozov, Y. S. Derbenev, A. Afanasev, R. P. Johnson, B. Erdelyi, and J. A. Maloney, “Parametric-Resonance Ionization Cooling in Twin-Helix”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ009, pp. 2784-2786. 
[n]	R. De Maria et al., “SixTrack Project: Status, Runtime Environment, and New Developments”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 172-178. doi:10.18429/JACoW-ICAP2018-TUPAF02
[n]	M. Anerella et al., “Engineering of the AGS Snake Coil Assembly”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE004, pp. 1939-1941. 
[n]	M. N. Stolyarov et al., “Development of Test Facility for HED@FAIR Quadrupoles”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 366-368. doi:10.18429/JACoW-RUPAC2018-WEPSB44
[n]	R. R. Stevens, P. Schafstall, J. D. Schneider, J. Sherman, T. Zaugg, and T. Taylor, “DC Proton Beam Measurements in a Single-Solenoid Low-Energy Beam Transport System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-78, pp. 549-551. 
[n]	A. Blednykh et al., “NSLS-II Storage Ring BPM Button Development”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 748-750. doi:10.18429/JACoW-IPAC2015-MOPMN021
[n]	L. David and E. L?®corch?®, “Software Trends for Both the GANIL SPIRAL Control”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-04, pp. 564-566. 
[n]	Y.Funakoshi; T.Agho; K.Akai; K.Ebihara; K.Egawa; A.Enomoto; J.Flanagan; H.Fukuma; K.Furukawa; T.Furuya; J.Haba; S.Hiramatsu; T.Ieiri; N.Iida; H.Ikeda; T.Kageyama; S.Kamada; T.Kamitani; S.Kato; M.Kikuchi; E.Kikutani; H.Koiso; M.Masuzawa; T.Mimashi; A.Morita; T.T.Nakamura; K.Naka, “KEKB Status”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH06, pp. XX-XX. 
[n]	A. Burov et al., “Status of the Fermilab Electron Cooling Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A01, pp. 1265-1267. 
[n]	J. Boillot, G. Daems, P. Heymans, and M. Overington, “Pulse-to-Pulse Modulation of the Beam Characteristics and Utilization in the CERN PS Accelerator Complex”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2195-2198. 
[n]	M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325. 
[n]	L. Chiesa et al., “Magnetic Field Measurements of the Nb3Sn Common Coil Dipole RD3c”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB008, pp. 170-172. 
[n]	R. F. Hubbard et al., “Simulation of Density Channel Guiding in Capillary Discharge Experiments and Laser Wakefield Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA133, pp. 3693-3695. 
[n]	P. Tenenbaum, P. Emma, L. Hendrickson, N. Phinney, T. O. Raubenheimer, and M. Woodley, “Use of Simulation Programs for the Modelling of the Next Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA30, pp. 3456-3458. 
[n]	J. Campmany et al., “A New Bench Concept for Measuring Magnetic Fields of Big Closed Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1690-1692. doi:10.18429/JACoW-IPAC2015-TUPJE036
[n]	M. C. Ross et al., “Use of Acoustic Emission to Diagnose Breakdown in Accelerator RF Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB038, pp. 1279-1281. 
[n]	A. Sheng, C. M. Cheng, C. K. Kuan, and D. Shu, “Design and Analysis of EPU XBPM in TPS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR050, pp. 894-896. 
[n]	J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70. 
[n]	J. P. Thermeau et al., “The First Tests on Vertical Cryostat GERSEMI at FREIA Facility”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 921-924. doi:10.18429/JACoW-SRF2019-THP034
[n]	S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511. 
[n]	M. Pont, N. Ayala, G. Benedetti, M. Carl?á, Z. Mart?¡, and R. N????ez-Prieto, “A Pinger Magnet System for the ALBA Synchrotron Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3039-3042. doi:10.18429/JACoW-IPAC2015-WEPMN050
[n]	G. M. Kazakevitch et al., “Magnetron Driven Classical Microtron as an Injector for a Wide Band Tunable Compact Far Infrared Free Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH115, pp. 2739-2741. 
[n]	P. Axel et al., “Microton Using a Superconducting Electron Linac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1176-1179. 
[n]	J. A. Maloney et al., “Studies of the Twin Helix Parametric-resonance Ionization Cooling Channel with COSY INFINITY”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD011, pp. 1428-1430. 
[n]	F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690. 
[n]	M. N. Nguyen, C. Burkhart, K. J. P. Macken, and J. J. Olsen, “Compact, Intelligent, Digitally Controlled IGBT Gate Drivers for a PEBB-based ILC Marx Modulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD100, pp. 3335-3337. 
[n]	E. Matias, G. Judkins, M. McKibben, and J. Swirsky, “The Use of Process and Instrumentation Drawings for Accelerator and Beamline Control Applications at the Canadian Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP047, pp. 191-193. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search