JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534. 
[n]	A. Vergara-Fern?índez, R. Denz, and F. Rodr?¡guez-Mateos, “Reliability Analysis for the Quench Detection in the LHC Machine”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE012, pp. 2445-2447. 
[n]	L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337. 
[n]	R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 283-286. 
[n]	L. Begin et al., “Portable Linac Using a CW Magnetron as Power Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07J, pp. 743-745. 
[n]	A. Dudarev et al., “Advanced Studies on New Generation of Electron-positron Accelerators and Colliders for Fundamental and Applied Researches”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME027, pp. 1631-1633. 
[n]	H. Witte, R. B. Palmer, and B. Parker, “Options for the Spectrometer Magnet of the eRHIC IR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2401-2403. doi:10.18429/JACoW-IPAC2018-WEPMF017
[n]	R. Stiening, “The Status of the SLAC Linear Collider Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1976-1978. 
[n]	B. Bradu et al., “Compensation of Beam Induced Effects in LHC Cryogenic Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1205-1208. doi:10.18429/JACoW-IPAC2016-TUPMB048
[n]	J. D. Zumbro et al., “Measurements of Quadrupole Magnets for the MIT-bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2125-2128. 
[n]	J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216. 
[n]	M. Bassetti, C. Biscari, and C. Milardi, “Solenoidal Compensation Scheme for an Interaction Region of an Electron-Positron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1036-1039. 
[n]	F. Cilyo, J. McCarthy, and B. Wisner, “Magnet Current Bypass Shunt”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3757-3760. 
[n]	R. Grewe et al., “Superconducting RF Cavity Materials Research at the S-DALINAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 74-76. doi:10.18429/JACoW-SRF2019-MOP022
[n]	G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974. 
[n]	D. Widegren, T. Ladzinski, R. Lyzwa, S. Mallon Amerigo, S. Petit, and B. Rousseau, “Micado - The Data Import Engine of the CERN Engineering and Equipment Data Management System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC131, pp. 1377-1379. 
[n]	J. Skaritka et al., “The Design and Construction of NSLS-II Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP008, pp. 145-147. 
[n]	M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX. 
[n]	X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2921-2923. doi:10.18429/JACoW-IPAC2015-WEPMN004
[n]	J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313. 
[n]	C. Petit-Jean-Genaz and V. RW. Schaa, “IPAC'10 Award for the JACoW Collaboration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPPMH04, pp. 3668-3672. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search