JaCoW Logo

Reference Search

Favourites


For Word

[n]	M.-A. Tordeux et al., “Progress on the New Booster for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3267-3271. doi:10.18429/JACoW-IPAC2023-WEPL072
[n]	C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337. 
[n]	R. Warange and R. E. Braddock, “SKA Synchronization and Timing Local Monitor Control - Software Design Approach”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1190-1194. doi:10.18429/JACoW-ICALEPCS2017-THCPL04
[n]	M. Serluca, T. Friedrich, A. Jansson, and C. Plostinar, “The development of aggregation diagrams for high-level planning at the ESS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2305-2308. doi:10.18429/JACoW-IPAC2023-TUPM048
[n]	P. Kneisel and K. Saito, “Superconducting Niobium Cavities with High Gradients”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-42, pp. 160-162. 
[n]	M. T. Gundogan, O. Yavas, A. A. Aydin, E. Kasap, and C. Kaya, “Design, Production and Tests of Button Type BPM for TAC-TARLA IR FEL Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 27-30. doi:10.18429/JACoW-IBIC2016-MOPG01
[n]	W. Xu et al., “Beam Commissioning of the SRF 704 MHz Photoemission Gun”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP012, pp. 70-72. 
[n]	C. M. Gulliford, A. C. Bartnik, I. V. Bazarov, and J. M. Maxson, “Multi-objective Genetic Optimization of Single Shot Ultrafast Electron Diffraction Beamlines”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1615-1617. doi:10.18429/JACoW-IPAC2017-TUPAB126
[n]	J. C. Frisch et al., “Performance of the SLC Polarized Electron Source and Injector with the SLAC 3 km Linac Configured for Fixed Target Experiments”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3027-3030. 
[n]	J. A. Crittenden, “Initial Modeling of Electron Cloud Buildup in the Final-focus Quadrupole Magnets of the SuperKEKB Positron Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2218-2221. doi:10.18429/JACoW-IPAC2015-TUPTY079
[n]	D. S. Day, A. Hahn, C. Prados, and M. Reese, “Improving Throughput and Latency of D-Bus to Meet the Requirements of the Fair Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 809-812. doi:10.18429/JACoW-ICALEPCS2017-TUPHA168
[n]	Y. Zhang, “Beam Tuning Strategy of the FRIB Linac Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP066, pp. 3889-3891. 
[n]	H. S. Lee, W. H. Hwang, S. H. Kim, M. H. Cho, I. S. Ko, and W. Namkung, “RF Test Results of Choke Flange for High Power Waveguide Valve”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D021, pp. 130-132. 
[n]	E. Ergenlik et al., “Instrumentation and operation modes for the commissioning phase of the SEALab SRF photoinjector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4703-4705. doi:10.18429/JACoW-IPAC2023-THPL103
[n]	M. Castellano et al., “Bunch Length Measurements at ADONE”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 869-872. 
[n]	G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4243-4247. doi:10.18429/JACoW-IPAC2016-FRXAA01
[n]	G. Bassato et al., “Safety Requirements in the SPES Control System: Preliminary Design”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP094, pp. 585-587. 
[n]	A. Mokhtarani, B. C. Brown, R. W. Hanft, A. R. Oleck, T. Peterson, and F. Turkot, “Production Measurements on the Quadrupole Correctors for the New Low-beta System for the Tevatron Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2230-2233. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search