JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90. 
[n]	M. L. Neubauer et al., “Innovative Magnetron Power Sources for Superconducting RF (SRF) Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1348-1350. doi:10.18429/JACoW-IPAC2022-TUPOTK057
[n]	S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n]	A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n]	V. Bharadwaj, R. Pitthan, J. Sheppard, H. Vincke, and J. W. Wang, “Heat Deposition in Positron Sources for ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP039, pp. 2574-2576. 
[n]	C. M. S. Sears, R. L. Byer, E. R. Colby, T. Plettner, R. Siemann, and J. E. Spencer, “Harmonic Inverse FEL Interaction at 800nm”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP056, pp. XX-XX. 
[n]	J. Rodnizki et al., “Superconducting Accelerating Cavity Pressure Sensitivity Analysis and Stiffening”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP134, pp. 373-376. 
[n]	M. Bassetti, O. Coiro, A. Ghigo, M. Migliorati, L. Palumbo, and M. Serio, “DAPhiNE Longitudinal Feedback”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 807-810. 
[n]	J. A. Macdonald et al., “An RF Separator for Cloud Muons at TRIUMF”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2833-2836. 
[n]	S. Banna, V. Berezovsky, and L. Schachter, “First Experimental Evidence for PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI01, pp. 1889-1893. 
[n]	B. Kaizer, Y. Ben Aliz, I. Fishman, J. Rodnizki, and L. Weissman, “Warming Rate Reduction of the SARAF RF Couplers by Application of a High Voltage Dc Bias”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP132, pp. 1168-1170. 
[n]	J. B. Pearson et al., “Magnetic Channel Design Concepts for the Extraction of H- Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1848-1851. 
[n]	E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Muon Production via the ESSnuSB Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3213-3215. doi:10.18429/JACoW-IPAC2016-THPMB001
[n]	G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 343-346. 
[n]	J. L. Rothman and R. J. Nawrocky, “Active Interlock for Storage Ring Insertion Devices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 266-268. 
[n]	S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160. 
[n]	J. B. Pearson, R. J. Balden, W. J. Kleeven, L. S. Milinkovic, and B. F. Milton, “Aspects of Phase Space Dynamics in Spiral Inflectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-02, pp. 435-438. 
[n]	M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346. 
[n]	A. Rubio, G. Cuni, D. Fernandez-Carreiras, S. Rubio-Manrique, N. Serra, and J. Villanueva, “ALBA Equipment Protection System, Current Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1599-1603. doi:10.18429/JACoW-ICALEPCS2017-THPHA096
[n]	C. K. Sinclair et al., “Thermal Emittance Measurements from Negative Electron Affinity Photocathodes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS020, pp. 1221-1223. 
[n]	V. Ivanov, K. Ko, A. Krasnykh, L. Ives, and G. Miram, “3D Method for the Design of Multi or Sheet Beam RF Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH312, pp. 1213-1215. 
[n]	A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6. doi:10.18429/JACoW-RuPAC2021-MOX02
[n]	B. Scott, R. Hettel, H.-D. Nuhn, and J. Sebek, “SSRL Beam Position Monitors”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1545-1548. 
[n]	K.-J. Kim et al., “Requirements and Design of a Highly Stable Infrared Free Electron Laser at LBL”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 559-562. 
[n]	P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602. 
[n]	H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n]	C. Schmidt and C. Curtis, “Negative Hydrogen-Ion Program at Fermilab”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB11, pp. 402-404. 
[n]	R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40. 
[n]	H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146. 
[n]	J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303. 
[n]	A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed  ISABELLE"  Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245. 
[n]	O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 852-854. doi:10.18429/JACoW-IPAC2019-MOPTS007
[n]	B. X. Yang et al., “Status of the APS Diagnostics Undulator Beamline”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P045, pp. 2207-2209. 
[n]	M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n]	R. Billen, “LEP Traceability”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B05, pp. 2411-2413. 
[n]	D. Schirmer and A. Althaus, “Integration of a Model Server into the Control System of the Synchrotron Light Source DELTA”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1427. doi:10.18429/JACoW-ICALEPCS2019-WEPHA137
[n]	L. Neri et al., “Beam Commissioning of the High Intensity Proton Source Developed at INFN-LNS for the European Spallation Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2530-2532. doi:10.18429/JACoW-IPAC2017-WEOBB2
[n]	C. K. Sinclair, “High Brightness, High Average Current Injector Development at Cornell”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper WEOB002, pp. XX-XX. 
[n]	E. Bouquerel, E. Baussan, M. Dracos, and N. Vassilopoulos, “Energy Deposition and Activation Studies of the ESSnuSB Horn Station”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 561-563. doi:10.18429/JACoW-IPAC2017-MOPIK029
[n]	M. Schmidt, A. Thorn, and G. Zschornack, “DREEBIT EBIS/T for Applications in Accelerator Physics”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEB03, pp. 170-171. 
[n]	P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742. 
[n]	J. Willard, T. Wilson, and W. A. Wurtz, “Compensation Controls for an Elliptically Polarising Undulator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1658-1662. doi:10.18429/JACoW-ICALEPCS2017-THPHA120
[n]	W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280. 
[n]	J. Galayda, “Performance of a Correlator Filter in Betatron Tune Measurements and Damping on the NSLS Booster”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2132-2135. 
[n]	G. Portmann, “Slow Orbit Feedback at the ALS using MATLAB”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP45, pp. 2373-2375. 
[n]	G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193. 
[n]	P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237. 
[n]	J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ22, pp. 2506-2508. 
[n]	J. T. M. Lyles, W. C. Barkley, R. E. Bratton, M. S. Prokop, and D. Rees, “Design, Fabrication, Installation and Operation of New 201 MHz RF Systems at LANSCE”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 564-567. doi:10.18429/JACoW-LINAC2016-TUPLR046
[n]	K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363. 
[n]	R. Nietuby et al., “Status of PolFEL project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV003, pp.. 
[n]	A. Shimizu, I. Miura, and T. Saito, “Post-Injector Cyclotron Beam Bunching System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-13, pp. 376-379. 
[n]	K. O. Creek and D. J. Liska, “D. C. Power System for Deuteron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2988-2991. 
[n]	R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793. 
[n]	C. Diao and H. O. Moser, “Numerical study of field errors due to mechanical tolerances in superconducting miniundulators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA061, pp. 711-713. 
[n]	E. S. McCrory, L. Allen, K. L. Junck, M. Popovicacute, and C. Schmidt, “The Performance of the Beam Diagnostics Systems for the Fermilab 400 MeV Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-75, pp. 878-880. 
[n]	L. Ahrens et al., “SNS Ring Study at the AGS Booster”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B16, pp. 987-992. 
[n]	K. Furukawa and R. Rechenmacher, “Network Analyser for the EPICS Channel Access Protocol”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP008, pp. 96-98. 
[n]	D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n]	J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1277-1280. 
[n]	K. Bourkland, C. Curtis, G. Lee, and G. Tool, “Improved FNAL Linac Beam Choppers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2994-2997. 
[n]	N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967. 
[n]	C. Gardner et al., “Analysis of Resonance-Driving Imperfections in the AGS Booster”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 979-982. 
[n]	S. J. Lee, J. H. Han, and D. E. Kim, “Elliptically Polarizing Undulator Design for PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4362-4365. doi:10.18429/JACoW-IPAC2018-THPMK031
[n]	C. Bianchini, J. Browne, K. H. Kim, P. Krejcik, M. Weaver, and S. Zelazny, “LCLS-II Timing Pattern Generator Configuration GUIs”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 307-310. doi:10.18429/JACoW-ICALEPCS2017-TUMPL04
[n]	C. Roderick, R. Billen, M. Gourber-Pace, N. Hoibian, and M. Peryt, “The CERN Accelerator Measurement Database: On the Road to Federation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN009, pp. 102-105. 
[n]	R. Bourtembourg et al., “TANGO Kernel Development Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 27-33. doi:10.18429/JACoW-ICALEPCS2017-MOBPL02

For LaTeX

Use Complete Form

For BibTeX

References

Back to search