Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
[n] S. Kumar and A. Mandal, “Transverse Emittance Measurement for Low Energy Ion Beams Using Quadrupole Scan Method”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 226-228. doi:10.18429/JACoW-IPAC2015-MOPWA048
[n] R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
[n] M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
[n] V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
[n] J. H. Wang et al., “Experiment of Transverse Feedback System at HLS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP082, pp. 4147-4149.
[n] D. Kostin et al., “S1-Global Module Tests at STF/KEK”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOODA02, pp. 38-40.
[n] G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] T. Kroc and A. Moretti, “Conditioning of High Gradient H- Accelerating Cavities”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO422, pp. 102-104.
[n] A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 140-145.
[n] R. W. Klaffky, W. Broome, R. D, S. L. Kramer, M. G. Thomas, and J. M. Wang, “Longitudinal Coupled Bunch Instabilities on the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P051, pp. 2305-2307.
[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
[n] S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2406-2408. doi:10.18429/JACoW-IPAC2014-WEPME058
[n] J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
[n] M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-MEDSI2016-TUPE11
[n] M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n] J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 118-123.
[n] L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 387-390.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
[n] C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3051-3054. doi:10.18429/JACoW-IPAC2016-WEPOY030
[n] N. Coppola, J. Tolkiehn, and C. Youngman, “Control Using Beckhoff Distributed Rail Systems at the European XFEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC046, pp. 669-672.
[n] R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
[n] K. N. Sjobak et al., “Status of the CLEAR Electron Beam User Facility at CERN”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 983-986. doi:10.18429/JACoW-IPAC2019-MOPTS054
[n] M. Champion, “Design, Performance and Production of the Fermilab TESLA RF Input Couplers”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP74, pp. 521-523.
[n] R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
[n] M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
[n] G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44.
[n] A. Luedeke and E. Zimoch, “A Review on Accelerator Operator Training”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3822-3824. doi:10.18429/JACoW-IPAC2014-THPRI026
[n] J. Qiang and R. D. Ryne, “A Layer-Based Object-Oriented Parallel Framwork for Beam Dynamics Studies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH092, pp. 3060-3062.
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] X. Buffat, T. Pieloni, C. Tambasco, J. Barranco, and A. Florio, “Simulation of Head-on Beam-Beam Limitations in Future High Energy Colliders”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1430-1433. doi:10.18429/JACoW-IPAC2016-TUPMW009
[n] G. Jud, A. Luedeke, and W. Portmann, “The PSI Web Interface to the EPICS Channel Archiver”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN020, pp. 141-143.
[n] P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1070-1072. doi:10.18429/JACoW-ICALEPCS2015-WEPGF155
[n] A. Streun, ?à. Andersson, M. B?Âge, and A. Luedeke, “Coupling Control at the SLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC003, pp. 1983-1985.
[n] J. R. Richardson, “A Simplified Approach”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A03, pp. 7-11.
[n] E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1167-1170. doi:10.18429/JACoW-IPAC2016-TUPMB031
[n] A. Shemyakin et al., “Test of a Full-Scale Prototype of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16013, pp. XX-XX.
[n] A. Burov et al., “Optics of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16039, pp. XX-XX.
[n] J. Borburgh et al., “Construction and Initial Tests of the Electrostatic Septa for MedAustron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI002, pp. 3288-3290.
[n] R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 445-448.
[n] M. Apollonio and R. Bartolini, “Investigation of Source Point Instabilities in Dipole Magnet Based Beamlines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME055, pp. 3055-3057.
[n] S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n] A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1450-1453. doi:10.18429/JACoW-IPAC2025-TUPS018
[n] M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
[n] J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
[n] N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
[n] H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2348-2350. doi:10.18429/JACoW-IPAC2016-WEPMR034
[n] W. Kalbreier, N. Garrel, R. Guinand, R. L. Keizer, and K. H. Kissler, “Layout, Design and Construction of the Electrostatic Separation System of the LEPee- Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1184-1187.
[n] T. R. Edgecock and E. H. M. Wildner, “The EUROnu Project: A High Intensity Neutrino Oscillation Facility in Europe”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUOAA01, pp. 894-896.
[n] N. C. Shipman, A. Macpherson, G. Burt, and J. A. Mitchell, “Investigating the Effect of Inhomogeneous Resistivity on Bulk RRR and Heat Conductivity Using a Lattice Green's Functions Method”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2436-2439. doi:10.18429/JACoW-IPAC2018-WEPMF035
[n] D. Boukhelef, J. Szuba, K. Wrona, and C. Youngman, “Software Development for High Speed Data Recording and Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC045, pp. 665-668.
[n] V. L. Smirnov, S. B. Vorozhtsov, A. Goto, S. Hojo, T. Honma, and K. Katagiri, “Quantitative Simulation of NIRS-930 Cyclotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC069, pp. 292-294.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
[n] H. Henke, “Transport and Acceleration of Low-Emittance Electron Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH1-02, pp. 481-486.
[n] S. Lee, J. S. Hong, J. S. Park, M. K. Park, and S. W. Yun, “Management Tools for Distributed Control System in KSTAR”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU006, pp. 694-697.
[n] M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
For LaTeX
Use Complete Form
For BibTeX
References
- Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259.
- S. Kumar and A. Mandal, “Transverse Emittance Measurement for Low Energy Ion Beams Using Quadrupole Scan Method”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 226-228.
- R. Ganter et al., “Status of SwissFEL Undulator Lines”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO22, pp. 263-266.
- M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
- V. Dudnikov, “30 Years of High-Intensity Negative Ion Sources for Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH005, pp. 2087-2089.
- J. H. Wang et al., “Experiment of Transverse Feedback System at HLS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP082, pp. 4147-4149.
- D. Kostin et al., “S1-Global Module Tests at STF/KEK”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOODA02, pp. 38-40.
- G. C. Pappas and R. L. Cassel, “An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH034, pp. 3747-3749.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- T. Kroc and A. Moretti, “Conditioning of High Gradient H- Accelerating Cavities”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO422, pp. 102-104.
- A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 140-145.
- R. W. Klaffky, W. Broome, R. D, S. L. Kramer, M. G. Thomas, and J. M. Wang, “Longitudinal Coupled Bunch Instabilities on the NSLS X-Ray Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P051, pp. 2305-2307.
- M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
- S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2406-2408.
- J. Paul Farrell, V. Dudnikov, and G. Dudnikova, “Optimization of Surface Plasma sources for Efficient Production of Negative Ions with High Emission Current Density”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-06, pp. XX-XX.
- M. Quispe et al., “Study on Thermal Mechanical Design and Optimization Analysis for the ALBA Infrared Microspectroscopy Beamline (MIRAS) Extraction Mirror Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 191-193.
- J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 118-123.
- L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 387-390.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- T.-S. F. Wang, “Robinson Instability and Logitudinal Mode Coupling”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1160-1163.
- C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3051-3054.
- N. Coppola, J. Tolkiehn, and C. Youngman, “Control Using Beckhoff Distributed Rail Systems at the European XFEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC046, pp. 669-672.
- R. H. Siemann and D. P. Pritzkau, “Results of an RF Pulsed Heating Experiment at SLAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA18, pp. 779-781.
- K. N. Sjobak et al., “Status of the CLEAR Electron Beam User Facility at CERN”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 983-986.
- M. Champion, “Design, Performance and Production of the Fermilab TESLA RF Input Couplers”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP74, pp. 521-523.
- R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
- M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
- G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44.
- A. Luedeke and E. Zimoch, “A Review on Accelerator Operator Training”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3822-3824.
- J. Qiang and R. D. Ryne, “A Layer-Based Object-Oriented Parallel Framwork for Beam Dynamics Studies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH092, pp. 3060-3062.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- X. Buffat, T. Pieloni, C. Tambasco, J. Barranco, and A. Florio, “Simulation of Head-on Beam-Beam Limitations in Future High Energy Colliders”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1430-1433.
- G. Jud, A. Luedeke, and W. Portmann, “The PSI Web Interface to the EPICS Channel Archiver”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN020, pp. 141-143.
- P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1070-1072.
- A. Streun, ?à. Andersson, M. B?Âge, and A. Luedeke, “Coupling Control at the SLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC003, pp. 1983-1985.
- J. R. Richardson, “A Simplified Approach”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A03, pp. 7-11.
- E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1167-1170.
- A. Shemyakin et al., “Test of a Full-Scale Prototype of the Fermilab Electron Cooler”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16013, pp. XX-XX.
- A. Burov et al., “Optics of the Fermilab Electron Cooler”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16039, pp. XX-XX.
- J. Borburgh et al., “Construction and Initial Tests of the Electrostatic Septa for MedAustron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI002, pp. 3288-3290.
- R. Bailey, G. Geschonke, E. Keil, M. Lamont, and G. von Holtey, “Studies of Bunch Trains in LEP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 445-448.
- M. Apollonio and R. Bartolini, “Investigation of Source Point Instabilities in Dipole Magnet Based Beamlines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME055, pp. 3055-3057.
- S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1731-1733.
- A. Flint, E. Echeverria, A. Galdi, N. Gonzalez, J. Maxson, and C. Pennington, “Synthesis of efficient ordered sodium potassium antimonide photocathodes via molecular beam epitaxy”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS018, pp. 1450-1453.
- M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
- J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298.
- N. Bultman, J. Billen, Z. Chen, M. Collier, D. Richards, and L. M. Young, “Fabrication and Tuning of the SNS CCL Hot Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB052, pp. 2844-2846.
- H. Park, A. Castilla, S. U. De Silva, J. R. Delayen, and V. S. Morozov, “Analyses of 476 MHz and 952 MHz Crab Cavities for JLAB Electron Ion Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2348-2350.
- W. Kalbreier, N. Garrel, R. Guinand, R. L. Keizer, and K. H. Kissler, “Layout, Design and Construction of the Electrostatic Separation System of the LEPee- Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1184-1187.
- T. R. Edgecock and E. H. M. Wildner, “The EUROnu Project: A High Intensity Neutrino Oscillation Facility in Europe”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUOAA01, pp. 894-896.
- N. C. Shipman, A. Macpherson, G. Burt, and J. A. Mitchell, “Investigating the Effect of Inhomogeneous Resistivity on Bulk RRR and Heat Conductivity Using a Lattice Green's Functions Method”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2436-2439.
- D. Boukhelef, J. Szuba, K. Wrona, and C. Youngman, “Software Development for High Speed Data Recording and Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC045, pp. 665-668.
- V. L. Smirnov, S. B. Vorozhtsov, A. Goto, S. Hojo, T. Honma, and K. Katagiri, “Quantitative Simulation of NIRS-930 Cyclotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC069, pp. 292-294.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
- H. Henke, “Transport and Acceleration of Low-Emittance Electron Beams”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH1-02, pp. 481-486.
- S. Lee, J. S. Hong, J. S. Park, M. K. Park, and S. W. Yun, “Management Tools for Distributed Control System in KSTAR”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU006, pp. 694-697.
- M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
Back to search