Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-Y. Liao et al., “Beam Profiles Analysis for Beam Diagnostic Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC146, pp. 1368-1370.
[n] S. Motonaga, J. Ohnishi, and H. Takebe, “Design of Magnets for the 8 GeV Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1125-1128.
[n] J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
[n] S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
[n] M. A. Gallilee et al., “Development of Aluminium Vacuum Chambers for the LHC Experiments at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2354-2356. doi:10.18429/JACoW-IPAC2014-WEPME040
[n] A. Bertarelli et al., “High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS036, pp. 1614-1616.
[n] S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
[n] J.-F. Ostiguy and D. E. Johnson, “Three-Dimensional End Effects in Iron Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP10, pp. 1349-1351.
[n] D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
[n] V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
[n] A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
[n] M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 476-479.
[n] K. Tian, W. J. Corbett, X. Huang, and J. A. Safranek, “Low-Energy Intrabeam Scattering Measurements at the Spear3 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 334-336. doi:10.18429/JACoW-IPAC2014-MOPRO104
[n] H.-S. Kang, M.-H. Cho, J. H. Han, T.-H. Kang, I. S. Ko, and C. H. Yi, “Start to End Simulation of Three Bunch Compressor Lattice for PAL XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP062, pp. 1738-1740.
[n] W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
[n] M. Vossberg, R. M. Brodhage, M. Kaiser, F. Maimone, W. Vinzenz, and S. Yaramyshev, “Design Studies for the Proton-Linac RFQ for FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3718-3720. doi:10.18429/JACoW-IPAC2015-THPF017
[n] G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Saturation Behaviour of the LHC NEG Coated Beam Pipes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD015, pp. 2525-2527.
[n] Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
[n] L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
[n] J. Johnson, R. Rimmer, and J. Corlett, “Computer Simulations of a Wide-Bandwidth Ferrite-Loaded High-Power Waveguide Termination”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR14, pp. 1818-1820.
[n] Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n] U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
[n] W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3195-3197. doi:10.18429/JACoW-IPAC2014-THPRO129
[n] R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739.
[n] C. H. Kuo et al., “Commissioning Tune Feedback in the Taiwan Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO016, pp. 517-519.
[n] G. Lanza, V. Baglin, G. Bregliozzi, and J. M. Jimenez, “LHC Beam Vacuum During 2011 Machine Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD018, pp. 2534-2536.
[n] N. Delerue et al., “High Flux Polarized Gamma Rays Production: First Measurements with a Four-mirror Cavity at the ATF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO002, pp. 1446-1448.
[n] Y. Sue et al., “A Bunch Structure Measurement of Muons Accelerated by RFQ Using a Longitudinal Beam-Profile Monitor With High Time Resolution”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 37-40. doi:10.18429/JACoW-IPAC2019-MOZZPLM2
[n] R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOP013, pp. 70-73.
[n] M. Masuzawa et al., “SuperKEKB Main Ring Magnet System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3778-3781. doi:10.18429/JACoW-IPAC2016-THPOR006
[n] X. Yang, X. Huang, and J. A. Safranek, “LOCO Application to NSLS2 SR Dispersion and Beta Beating Correction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1989-1992. doi:10.18429/JACoW-IPAC2015-TUPHA012
[n] H. Iijima, M. Kuriki, and Y. M. Masumoto, “Surface Analysis of a Degraded NEA-GaAs Photocathode by Temperature Programmed Desorption Technique”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC116, pp. 3158-3160.
[n] G. Valentino et al., “Modeling and Simulation of LHC Beam-Based Collimator Setup”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR097, pp. 2059-2061.
[n] J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 106-111. doi:10.18429/JACoW-SRF2019-MOP030
[n] P. Spaedtke, “Low Energy Beam Transport for Ion Beams Created by an ECR”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-B02, pp. 213-218.
[n] M.-H. Wang, R. O. Hettel, X. Huang, T. Rabedeau, J. A. Safranek, and K. Tian, “Study of Ultra-low Emittance Design for SPEAR3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 337-339. doi:10.18429/JACoW-IPAC2014-MOPRO105
[n] F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX.
[n] Y. Nosochkov et al., “Optimization of Triplet Quadrupoles Field Quality for the LHC High Luminosity Lattice at Collision Energy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI016, pp. 1364-1366.
[n] S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2318-2321. doi:10.18429/JACoW-IPAC2015-TUPWI034
[n] H.-S. Kang et al., “Status of the PAL-XFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1042-1046. doi:10.18429/JACoW-LINAC2016-FR2A01
[n] N. Golubeva, V. Balandin, R. Brinkmann, and W. Decking, “Third-Order Apochromatic Drift-Quadrupole Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC069, pp. 1329-1331.
[n] G. H. Gillespie and G. E. McMichael, “Applications of MeV Proton and Deuteron Linear Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG13, pp. 107-109.
[n] A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4054-4056. doi:10.18429/JACoW-IPAC2015-THPF141
[n] C. Yin Vallgren et al., “Performance of Carbon Coating for Mitigation of Electron Cloud in the SPS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS028, pp. 1590-1592.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-Y. Liao et al., “Beam Profiles Analysis for Beam Diagnostic Applications”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC146, pp. 1368-1370.
- S. Motonaga, J. Ohnishi, and H. Takebe, “Design of Magnets for the 8 GeV Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1125-1128.
- J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
- S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
- M. A. Gallilee et al., “Development of Aluminium Vacuum Chambers for the LHC Experiments at CERN”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2354-2356.
- A. Bertarelli et al., “High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS036, pp. 1614-1616.
- S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
- J.-F. Ostiguy and D. E. Johnson, “Three-Dimensional End Effects in Iron Septum Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP10, pp. 1349-1351.
- D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
- V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
- A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
- M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 476-479.
- K. Tian, W. J. Corbett, X. Huang, and J. A. Safranek, “Low-Energy Intrabeam Scattering Measurements at the Spear3 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 334-336.
- H.-S. Kang, M.-H. Cho, J. H. Han, T.-H. Kang, I. S. Ko, and C. H. Yi, “Start to End Simulation of Three Bunch Compressor Lattice for PAL XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP062, pp. 1738-1740.
- W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
- M. Vossberg, R. M. Brodhage, M. Kaiser, F. Maimone, W. Vinzenz, and S. Yaramyshev, “Design Studies for the Proton-Linac RFQ for FAIR”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3718-3720.
- G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Saturation Behaviour of the LHC NEG Coated Beam Pipes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD015, pp. 2525-2527.
- Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
- L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
- J. Johnson, R. Rimmer, and J. Corlett, “Computer Simulations of a Wide-Bandwidth Ferrite-Loaded High-Power Waveguide Termination”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR14, pp. 1818-1820.
- Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 180-183.
- U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
- W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3195-3197.
- R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739.
- C. H. Kuo et al., “Commissioning Tune Feedback in the Taiwan Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO016, pp. 517-519.
- G. Lanza, V. Baglin, G. Bregliozzi, and J. M. Jimenez, “LHC Beam Vacuum During 2011 Machine Operation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD018, pp. 2534-2536.
- N. Delerue et al., “High Flux Polarized Gamma Rays Production: First Measurements with a Four-mirror Cavity at the ATF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO002, pp. 1446-1448.
- Y. Sue et al., “A Bunch Structure Measurement of Muons Accelerated by RFQ Using a Longitudinal Beam-Profile Monitor With High Time Resolution”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 37-40.
- R. L. Geng et al., “RD on the Niobium-Copper Superconducting Cavity at Peking University”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOP013, pp. 70-73.
- M. Masuzawa et al., “SuperKEKB Main Ring Magnet System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3778-3781.
- X. Yang, X. Huang, and J. A. Safranek, “LOCO Application to NSLS2 SR Dispersion and Beta Beating Correction”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1989-1992.
- H. Iijima, M. Kuriki, and Y. M. Masumoto, “Surface Analysis of a Degraded NEA-GaAs Photocathode by Temperature Programmed Desorption Technique”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC116, pp. 3158-3160.
- G. Valentino et al., “Modeling and Simulation of LHC Beam-Based Collimator Setup”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR097, pp. 2059-2061.
- J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 106-111.
- P. Spaedtke, “Low Energy Beam Transport for Ion Beams Created by an ECR”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper THCO-B02, pp. 213-218.
- M.-H. Wang, R. O. Hettel, X. Huang, T. Rabedeau, J. A. Safranek, and K. Tian, “Study of Ultra-low Emittance Design for SPEAR3”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 337-339.
- F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX.
- Y. Nosochkov et al., “Optimization of Triplet Quadrupoles Field Quality for the LHC High Luminosity Lattice at Collision Energy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI016, pp. 1364-1366.
- S. Wang et al., “Capture, Acceleration and Bunching RF Systems for the MEIC Booster and Storage Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2318-2321.
- H.-S. Kang et al., “Status of the PAL-XFEL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1042-1046.
- N. Golubeva, V. Balandin, R. Brinkmann, and W. Decking, “Third-Order Apochromatic Drift-Quadrupole Beamline”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC069, pp. 1329-1331.
- G. H. Gillespie and G. E. McMichael, “Applications of MeV Proton and Deuteron Linear Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG13, pp. 107-109.
- A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4054-4056.
- C. Yin Vallgren et al., “Performance of Carbon Coating for Mitigation of Electron Cloud in the SPS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS028, pp. 1590-1592.
Back to search