JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Li, “Estimations of Coherent Instabilities for JLEIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3903-3905. doi:10.18429/JACoW-IPAC2017-THPAB080
[n]	J. M. Grames et al., “CEBAF 200 kV Inverted Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS3, pp. 1501-1503. 
[n]	M. H. Cho et al., “Status of PLS 2-GeV Electron Linac Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4024, pp. 445-447. 
[n]	P. Smith, D. Christiansen, P. Greninger, and G. Spalek, “Automated Design of Coupled RF Cavities Using 2-D and 3-D Codes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH114, pp. 3114-3116. 
[n]	S. M. Chung, I. S. Ko, M. Kwon, and C. D. Park, “Beam-gas Lifetime Measurement in the PLS Electron Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23C, pp. 2181-2183. 
[n]	N. K. Kuksanov et al., “High Power ELV Accelerators for Industries Application”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHZ02, pp. 313-315. 
[n]	C.-Y. Tsai and R. Li, “Combination of Density and Energy Modulation in Microbunching Analysis”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1703-1706. doi:10.18429/JACoW-IPAC2016-TUPOR020
[n]	P. Collier, K. Cornelis, A. Hofmann, S. Myers, and H. Schmickler, “Synchro-Betatron Resonances in LEP”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP020G, pp. 418-420. 
[n]	J. D. Gilpatrick et al., “Low Energy Demonstration Accelerator (LEDA) Beam Instrumentation: RFQ-Accelerated Beam Results”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA150, pp. 2214-2216. 
[n]	A. Gallifa Terricabras et al., “Assessment of the Mechanical Properties of Ultra-High Purity Niobium After Cold Work and Heat Treatment With the HL-LHC Crab Cavities as Benchmark”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 860-865. doi:10.18429/JACoW-SRF2019-THP012
[n]	M. B. Jouve et al., “Real-time Protection of the ITER-like Wall at JET""”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU018, pp. 1096-1099. 
[n]	R. R. Mitchell, B. A. Gardner, T. Ilg, M. Leitner, and B. A. Prichard, “Upgrades to the Injector Cathode and Supporting Structure of the DARHT Second Axis Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP078, pp. 554-556. 
[n]	P. Vagin, P. Neumann, and M. Tischer, “Magnetic Measurement Developments for Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2016-2018. doi:10.18429/JACoW-IPAC2014-WEPRO034
[n]	C. Travier, M. Bernard, P. Georges, B. Leblond, G. Roger, and P. Thomas, “First Operation of a Femtosecond Laser Driven Photoinjector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1462-1465. 
[n]	M. Iwasaki et al., “Design and Status of the SuperKEKB Accelerator Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOAAB02, pp. 4-7. 
[n]	B. G. Oh et al., “Micro-mover Development and Test in the PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 229-231. doi:10.18429/JACoW-IPAC2016-MOPMR001
[n]	C. A. Goldenberg et al., “FEL-Oscillator for Feeding of High-Gradient Accelerating Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP168, pp. 1055-1057. 
[n]	R. E. Laxdal, R. Lee, and M. Pasini, “Progress in the Conceptual Design of the ISAC-II Linac at TRIUMF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH111, pp. 3939-3941. 
[n]	K. S. White, “Managing Mayhem”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOCAULT01, pp. 24-26. 
[n]	G. Le Meur, “A Mixed Finite Element Method for Particle Simulation in Lasertron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1204-1207. 
[n]	M. Kwon, I. H. Yu, H. J. Park, D. H. Han, M. Yoon, and Y. S. Kim, “PLS RF System Operation During the Commissioning”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR11, pp. 1812-1814. 
[n]	M. Borland, R. R. Lindberg, and A. Xiao, “Improvements in Modeling of Collective Effects in ELEGANT”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 549-552. doi:10.18429/JACoW-IPAC2015-MOPMA009
[n]	R. Li, H. G. Chen, D. M. Li, S. L. Lu, T. J. Shen, and D. X. Wang, “Ramping Power Supplies for the SSRF Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP123, pp. 3646-3648. 
[n]	S. Caspi, M. Helm, and L. J. Laslett, “Numerical Solution of Boundary Condition to Poisson's Equation and its Incorporation into the Program POISSON”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3722-3725. 
[n]	B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2925-2927. doi:10.18429/JACoW-IPAC2019-WEPRB051
[n]	B. D. S. Hall, P. K. Ambattu, G. Burt, D. Doherty, C. Lingwood, and P. Goudket, “Analysis of the Four Rod Crab Cavity for HL-LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC032, pp. 2275-2277. 
[n]	A. Homs, “Fast Scalar Data Buffering Interface in Linux 2.6 Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN027, pp. 943-946. 
[n]	J. S. Kim et al., “Status of FAR-TECH's ECR Ion Source Optimization Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS078, pp. 1829-1831. 
[n]	M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX. 
[n]	C.-Y. Tsai, S. Di Mitri, D. Douglas, R. Li, and C. Tennant, “Conditions for CSR Microbunching Gain Suppression”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1057-1060. doi:10.18429/JACoW-IPAC2016-TUOAB02
[n]	F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2582-2585. doi:10.18429/JACoW-IPAC2023-WEOGA1
[n]	R. M. Jones, K. L. F. Bane, R. H. Miller, T. O. Raubenheimer, G. Stupakov, and N. M. Kroll, “Emittance Dilution and Beam Break Up in the JLC/NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA39, pp. 3474-3476. 
[n]	G. Devanz, H. Safa, and C. Travier, “Preliminary Design of  a 704 MHz Power Coupler for a High Intensity Proton Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B02, pp. 2031-2033. 
[n]	B. Cluggish, S. Galkin, and J. S. Kim, “Modeling Ion Extraction from an ECR Ion Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS077, pp. 1826-1828. 
[n]	J. Roberts et al., “Design, Hardware Tests and First Results From the CLIC Drive Beam Phase Feed-Forward Prototype at CTF3”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP033, pp. 128-130. 
[n]	S. Myers and E. Peschardt, “The Efficiency of Acceleration by Phase Displacement in the Presence of RF Noise”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3529-3532. 
[n]	H. Nishimura, J. L. McDonald, and C. Timossi, “Cross Platform SCA Component using C++ Builder and Kylix”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE028, pp. 2385-2386. 
[n]	M. Tischer, P. Neumann, A. Sch?Âps, and P. Vagin, “Phase Shifters for the FLASH2 FEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2010-2012. doi:10.18429/JACoW-IPAC2014-WEPRO032
[n]	S. Atieh et al., “Machining and Characterizing X-band RF-structures for CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS098, pp. 1768-1770. 
[n]	Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA043, pp. 765-767. 
[n]	A. Kurup, N. Bliss, N. A. Collomb, and A. F. Grant, “Costing Methodology and Status of the Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD004, pp. 1410-1412. 
[n]	E. Ciapala, A. Hofmann, S. Myers, and T. Risselada, “The Variation of y, with Ap/p in the CERN ISR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3571-3574. 
[n]	J. E. Griffin and F. E. Mills, “Azimuthal Redistribution of Beam in the Fermilab Main Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3589-3592. 
[n]	J. S. L. Yap et al., “Beam Characterisation Using MEDIPIX3 and EBT3 Film at the Clatterbridge Proton Therapy Beamline”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3510-3513. doi:10.18429/JACoW-IPAC2019-THPMP033
[n]	W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 231. doi:10.18429/JACoW-ICALEPCS2019-MOPHA017
[n]	E. Meier, “Transport in Rectangular Quadrupole Channels”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2555-2558. 
[n]	D. Reggiani, D. C. Kiselev, M. Seidel, V. Talanov, and M. Wohlmuther, “Combined MCNP/Turtle Simulation of the SINQ Beam Line at PSI-HIPA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2410-2413. doi:10.18429/JACoW-IPAC2019-WEPMP038
[n]	I. Bahns, W. Hillert, P. Rauer, J. Ro?ƒbach, and H. Sinn, “Interaction of Powerful Electro-Magnetic Fields With Bragg Reflectors”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 673-676. doi:10.18429/JACoW-FEL2019-THP041
[n]	K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349. 
[n]	D. Gonnella et al., “Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1199-1205. doi:10.18429/JACoW-SRF2019-FRCAA3
[n]	M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437. 
[n]	A. M. Batrakov et al., “HIGH MAGNETIC FIELD SUPERCONDUCTING MAGNETS FABRICATED IN BUDKER INP FOR SR GENERATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFI01, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search