Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. I. Barnes et al., “Upgrading the National Ignition FacilityÔÇÖs (NIF) Integrated Computer Control System to Support Optical Thompson Scattering (OTS) Diagnostic”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 173-178. doi:10.18429/JACoW-ICALEPCS2021-MOPV021
[n] A. Coxe et al., “Status of error correction studies in support of FFA@CEBAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 949-951. doi:10.18429/JACoW-IPAC2023-MOPL177
[n] A. M. Lombardi et al., “End to End Beam Dynamics and RF Error Studies for Linac4”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP086, pp. 275-277.
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, J. Gomez, D. Gutierrez Arribas, and F. Toral, “Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO022, pp. 930-932.
[n] E. Al-Dmour, J. Ahlback, D. Einfeld, M. J. Grabski, and P. F. Tavares, “The Status of the Vacuum System of the MAX IV Laboratory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI043, pp. 3382-3384.
[n] W. Ross, R. Claus, and L. Sapozhnikov, “Gap Voltage Feed-Forward Board for PEP-II Low Level RF System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P056, pp. 2365-2367.
[n] W. Busse, “Integrated Tools for Cyclotron Operation (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-01, pp. 634-640.
[n] F. Poirier et al., “Beam Instrumentation, Challenging Tools for Demanding Projects ÔÇôÔÇô a Snapshot from the French Assigned Network”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 57-62. doi:10.18429/JACoW-HIAT2022-TU3I2
[n] D. Belohrad, D. Esperante Pereira, J. Kral, and S. B. Pedersen, “Upgrade of the LHC Bunch by Bunch Intensity Measurement Acquisition System”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 135-138. doi:10.18429/JACoW-IBIC2016-MOPG39
[n] O. Grimm, K. Klose, and S. Schreiber, “Double-pulse Generation with the FLASH Injector Laser for Pump/Probe Experiments”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH150, pp. 3143-3145.
[n] G. L. Wang, “Commissioning Status of the Dalian Cohernet Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2709-2712. doi:10.18429/JACoW-IPAC2017-WEPAB058
[n] L. Tavian, “Large Cryogenic Systems at 1.8 K”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUXF204, pp. 212-216.
[n] A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1077-1080. doi:10.18429/JACoW-IPAC2017-MOPVA095
[n] J. Hussain, V. Gupta, and G. Mishra, “Harmonic Undulator Radiation and FEL Gain with Two-Peak Electron Beam Energy Distribution”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC17, pp. 75-78.
[n] Y. Taira et al., “Development of Pulse Width Measurement Techniques in a Picosecond Range of Ultra-short Gamma Ray Pulses”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO013, pp. 1473-1475.
[n] H. Jeevakhan and G. Mishra, “X-cos SCILAB Model for Simulation of Intensity and Gain of Planar Undulator Radiation”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 138-140. doi:10.18429/JACoW-FEL2019-TUP041
[n] A. Lunin, G. Romanov, N. Solyak, and M. Wendt, “Design of a Submicron Resolution Cavity BPM for the ILC Main Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC23, pp. 192-194.
[n] X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
[n] O. S. Brüning and F. Willeke, “Reduction of Particle Losses in HERA by Generating an Additional Harmonic Tune Modulation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG07, pp. 420-422.
[n] P. Fl?®cher, J. Halbritter, R. Hietschold, and K. Hofmann, “The Preparation and Performance of Superconducting Cavities”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-04, pp. 499-501.
[n] A. S. Gowda et al., “High Fidelity Pulse Shaping for the National Ignition Facility”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1058-1065. doi:10.18429/JACoW-ICALEPCS2023-WE3AO02
[n] S. V. Kutsaev et al., “Industrial SRF Activities at RadiaBeam Technologies”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIYA03, unpublished.
[n] P. K. Sigg, J. Cherix, H. Frei, and M. M?ñrki, “Experience with the PSI-Cyclotron RF-System Under Heavy Beam Loading”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-08, pp. 534-537.
[n] M. Pont et al., “Power Converters for ALBA Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD067, pp. 3254-3256.
[n] W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
[n] K. Bongardt et al., “Theoretical Studies of the Ultra Slow Extraction for the Cooler Synchrotron COSY-Juelich”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1767-1770.
[n] R. E. Laxdal, K. Fong, A. K. Mitra, R. Poirier, T. Ries, and V. Zviagintsev, “A Mechanical Tuner and RF Drive Line System for the ISAC II Quarter Wave Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP32, pp. 700-702.
[n] G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
[n] J. B. Gonz?â et al., “Two-rotation Mechanism for an in Vacuum Beamstop”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 378-380. doi:10.18429/JACoW-MEDSI2016-WEPE40
[n] D. E. Suddeth, R. L. Kustom, and D. Schmitt, “Zero Gradient Synchrotron Booster Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1488-1492.
[n] X. H. Tang, J. S. Cao, Y. Y. Du, J. He, Y. F. Sui, and J. H. Yue, “A Novel BPM Mechanical Center Calibration Method Based on Laser Ranging”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 82-86. doi:10.18429/JACoW-IBIC2023-MOP026
[n] M.-E. Couprie et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH005, pp. 53-55.
[n] K. R. Crandall and J. E. Stovall, “RFQ Pole-Tip Construction”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B13, pp. 71-73.
[n] N. Yu. Kazarinov, I. A. Ivanenko, T. Adam, F. R. Osswald, and E. K. Traykov, “Focusing and Bunching of Ion Beam in Axial Injection Channel of IPHC Cyclotron TR24”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4733-4735. doi:10.18429/JACoW-IPAC2017-THPVA121
[n] D. J. Holder et al., “The Status of the Daresbury Energy Recovery Prototype Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH070, pp. 187-189.
[n] S. Terui et al., “Development of HOM Absorber for SuperKEKB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3394-3397. doi:10.18429/JACoW-IPAC2017-WEPVA058
[n] S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO06
[n] C. L. Fink et al., “NPBTS-Overview and Capabilities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 295-298.
[n] I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n] O. Azuma, H. Mizuno, and S. Tokumoto, “High Power Operation Results of the X-Band SLED System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1202-1205.
[n] K. K??mpel et al., “Current Status of the MYRRHA Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 892-894. doi:10.18429/JACoW-IPAC2019-MOPTS022
[n] R. H. Helm, “Computation of the Properties of Traveling-Wave Linac Structures”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-5, pp. 279-291.
[n] I. V. Rybakov and V. V. Paramonov, “Determination of Required Tolerances and Stop Band Width for Cells Manufacturing and Tuning in Compensated High Energy Accelerating Structures”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4139-4141. doi:10.18429/JACoW-IPAC2021-THPAB187
[n] R. Bossart, J. P. Papis, and V. Rossi, “Synchronous RF-Receivers for Beam Position and Intensity Measurements at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1899-1902.
[n] V. A. Moiseev et al., “Transverse Beam Matching and Correction Procedures in INR Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP077, pp. 435-437.
[n] J. Sura, L. Calabretta, G. Di Biasi, P. Gmaj, and D. Rifuggiato, “Material Consideration for Magnetic Channels”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XC-06, pp. 589-591.
[n] M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
[n] P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_002.
[n] A. Michalke, P. Michelato, H. Piel, and C. K. Sinclair, “First Operation of High-Quantum Efficiency Photocathodes Inside Superconducting Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1014-1017.
[n] P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
For LaTeX
Use Complete Form
For BibTeX
References
- A. I. Barnes et al., “Upgrading the National Ignition FacilityÔÇÖs (NIF) Integrated Computer Control System to Support Optical Thompson Scattering (OTS) Diagnostic”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 173-178.
- A. Coxe et al., “Status of error correction studies in support of FFA@CEBAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL177, pp. 949-951.
- A. M. Lombardi et al., “End to End Beam Dynamics and RF Error Studies for Linac4”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP086, pp. 275-277.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, J. Gomez, D. Gutierrez Arribas, and F. Toral, “Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO022, pp. 930-932.
- E. Al-Dmour, J. Ahlback, D. Einfeld, M. J. Grabski, and P. F. Tavares, “The Status of the Vacuum System of the MAX IV Laboratory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI043, pp. 3382-3384.
- W. Ross, R. Claus, and L. Sapozhnikov, “Gap Voltage Feed-Forward Board for PEP-II Low Level RF System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P056, pp. 2365-2367.
- W. Busse, “Integrated Tools for Cyclotron Operation (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-01, pp. 634-640.
- F. Poirier et al., “Beam Instrumentation, Challenging Tools for Demanding Projects ÔÇôÔÇô a Snapshot from the French Assigned Network”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 57-62.
- D. Belohrad, D. Esperante Pereira, J. Kral, and S. B. Pedersen, “Upgrade of the LHC Bunch by Bunch Intensity Measurement Acquisition System”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 135-138.
- O. Grimm, K. Klose, and S. Schreiber, “Double-pulse Generation with the FLASH Injector Laser for Pump/Probe Experiments”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH150, pp. 3143-3145.
- G. L. Wang, “Commissioning Status of the Dalian Cohernet Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2709-2712.
- L. Tavian, “Large Cryogenic Systems at 1.8 K”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUXF204, pp. 212-216.
- A. Castilla et al., “First RF Performance Results for the DQW Crab Cavities to be Tested in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1077-1080.
- J. Hussain, V. Gupta, and G. Mishra, “Harmonic Undulator Radiation and FEL Gain with Two-Peak Electron Beam Energy Distribution”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC17, pp. 75-78.
- Y. Taira et al., “Development of Pulse Width Measurement Techniques in a Picosecond Range of Ultra-short Gamma Ray Pulses”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO013, pp. 1473-1475.
- H. Jeevakhan and G. Mishra, “X-cos SCILAB Model for Simulation of Intensity and Gain of Planar Undulator Radiation”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 138-140.
- A. Lunin, G. Romanov, N. Solyak, and M. Wendt, “Design of a Submicron Resolution Cavity BPM for the ILC Main Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC23, pp. 192-194.
- X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
- O. S. Brüning and F. Willeke, “Reduction of Particle Losses in HERA by Generating an Additional Harmonic Tune Modulation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG07, pp. 420-422.
- P. Fl?®cher, J. Halbritter, R. Hietschold, and K. Hofmann, “The Preparation and Performance of Superconducting Cavities”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-04, pp. 499-501.
- A. S. Gowda et al., “High Fidelity Pulse Shaping for the National Ignition Facility”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE3AO02, pp. 1058-1065.
- S. V. Kutsaev et al., “Industrial SRF Activities at RadiaBeam Technologies”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIYA03, unpublished.
- P. K. Sigg, J. Cherix, H. Frei, and M. M?ñrki, “Experience with the PSI-Cyclotron RF-System Under Heavy Beam Loading”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-08, pp. 534-537.
- M. Pont et al., “Power Converters for ALBA Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD067, pp. 3254-3256.
- W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
- K. Bongardt et al., “Theoretical Studies of the Ultra Slow Extraction for the Cooler Synchrotron COSY-Juelich”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1767-1770.
- R. E. Laxdal, K. Fong, A. K. Mitra, R. Poirier, T. Ries, and V. Zviagintsev, “A Mechanical Tuner and RF Drive Line System for the ISAC II Quarter Wave Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP32, pp. 700-702.
- G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677.
- J. B. Gonz?â et al., “Two-rotation Mechanism for an in Vacuum Beamstop”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 378-380.
- D. E. Suddeth, R. L. Kustom, and D. Schmitt, “Zero Gradient Synchrotron Booster Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1488-1492.
- X. H. Tang, J. S. Cao, Y. Y. Du, J. He, Y. F. Sui, and J. H. Yue, “A Novel BPM Mechanical Center Calibration Method Based on Laser Ranging”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP026, pp. 82-86.
- M.-E. Couprie et al., “The ARC-EN-CIEL FEL Proposal”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH005, pp. 53-55.
- K. R. Crandall and J. E. Stovall, “RFQ Pole-Tip Construction”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B13, pp. 71-73.
- N. Yu. Kazarinov, I. A. Ivanenko, T. Adam, F. R. Osswald, and E. K. Traykov, “Focusing and Bunching of Ion Beam in Axial Injection Channel of IPHC Cyclotron TR24”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4733-4735.
- D. J. Holder et al., “The Status of the Daresbury Energy Recovery Prototype Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH070, pp. 187-189.
- S. Terui et al., “Development of HOM Absorber for SuperKEKB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3394-3397.
- S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199.
- C. L. Fink et al., “NPBTS-Overview and Capabilities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 295-298.
- I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC11, pp. 329-332.
- O. Azuma, H. Mizuno, and S. Tokumoto, “High Power Operation Results of the X-Band SLED System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1202-1205.
- K. K??mpel et al., “Current Status of the MYRRHA Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 892-894.
- R. H. Helm, “Computation of the Properties of Traveling-Wave Linac Structures”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-5, pp. 279-291.
- I. V. Rybakov and V. V. Paramonov, “Determination of Required Tolerances and Stop Band Width for Cells Manufacturing and Tuning in Compensated High Energy Accelerating Structures”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4139-4141.
- R. Bossart, J. P. Papis, and V. Rossi, “Synchronous RF-Receivers for Beam Position and Intensity Measurements at the CERN SPS Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1899-1902.
- V. A. Moiseev et al., “Transverse Beam Matching and Correction Procedures in INR Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP077, pp. 435-437.
- J. Sura, L. Calabretta, G. Di Biasi, P. Gmaj, and D. Rifuggiato, “Material Consideration for Magnetic Channels”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XC-06, pp. 589-591.
- M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
- P. J. Van Arsdall, R. Bryant, R. Carey, D. Casavant, L. Lagin, and R. Patterson, “Status of the National Ignition Facility and Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_002.
- A. Michalke, P. Michelato, H. Piel, and C. K. Sinclair, “First Operation of High-Quantum Efficiency Photocathodes Inside Superconducting Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1014-1017.
- P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
Back to search