JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Ferrero Colomo et al., “Performance Measurements and Analysis of Jitter Like Events for the PS Injection Kicker System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2549-2552. doi:10.18429/JACoW-IPAC2018-WEPMF075
[n]	C. Kurfuerst et al., “HEBT Commissioning for Horizontal Beamline Proton Treatments at MedaAustron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1324-1326. doi:10.18429/JACoW-IPAC2016-TUPMR035
[n]	K. Koyama, M. Yoshida, Z. Chen, H. Okamoto, and M. Uesaka, “Laser-Driven Dielectric Nano-Beam Accelerator for Radiation Biology Researches”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 873-875. doi:10.18429/JACoW-LINAC2016-THPLR014
[n]	J. Pozimski, R. Doelling, P. Gross, and T. Weis, “First Experimental Studies of a Gabor-Plasma-Lens in Frankfurt”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1536-1539. 
[n]	A. Drozhdin and N. Mokhov, “Modeling of Beam Loss in Tevatron and Backgrounds in the BTeV Detector”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT114, pp. 803-805. 
[n]	K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706. 
[n]	K. Takayama et al., “Emittance Blow up and Halo-formation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE067, pp. 1413-1415. 
[n]	H. Sakai et al., “Improvement of a Clean Assembly Work for Superconducting RF Cryomodule and Its Application to the KEK-STF Cryomodule”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 721-725. doi:10.18429/JACoW-SRF2019-TUP104
[n]	H. Deitinghoff, D. Li, and M. Sauer, “Beam Dynamics Calculations for the Simultaneous Acceleration of Ions with Different Charge to Mass Ratios in a RFQ”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP055L, pp. 1218-1220. 
[n]	S. Posen et al., “Nb?Sn at Fermilab: Exploring Performance”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 818-822. doi:10.18429/JACoW-SRF2019-THFUB1
[n]	S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n]	C. M. York, C. Ward, E. Tagliaferri, D. Hansen, J. Ewins, and A. Berick, “Neutron Beam from the UCLA Spiral - Ridge Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D03, pp. XX-XX. 
[n]	K. Nam, J. Choi, S. Hahn, and S. Oh, “Lattice Design for the Pohang Synchrotron Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 821-824. 
[n]	S. Sierra et al., “Status and Results Obtained on a RF Conditioning Test Bench for 704 MHz Couplers in the Frame of ESS Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 895-897. doi:10.18429/JACoW-LINAC2018-THPO093
[n]	Y. Shimosaki et al., “Status of the Induction Acceleration System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN050, pp. 1502-1504. 
[n]	I. Neththikumara et al., “Space charge studies on strong hadron cooler energy recovery linac”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 584-588. doi:10.18429/JACoW-NAPAC2025-TUP091
[n]	D. Bafia et al., “Understanding and Pushing the Limits of Nitrogen Doping”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3078-3081. doi:10.18429/JACoW-IPAC2019-WEPRB114
[n]	S. Alizada and A. Khaleghi, “The Study of Big Data Tools Usages in Synchrotrons”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1428-1431. doi:10.18429/JACoW-ICALEPCS2017-THPHA034
[n]	D. Prasuhn et al., “The Medium Energy Proton Synchrotron COSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B19, pp. 590-592. 
[n]	T. Kramer, Wr. Neustadt, W. Bartmann, C. Bracco, B. Goddard, and M. Meddahi, “Performance Studies for Protection against Asynchronous Dumps in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB063, pp. 1662-1664. 
[n]	W. Ebeling et al., “Superconduting RF-Cavities for a 30-GeV PETRA Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3357-3360. 
[n]	M. Marchetto et al., “The ARIEL Radioactive Ion Beam Transport System”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 891-893. doi:10.18429/JACoW-LINAC2016-THPLR023
[n]	T. Kramer et al., “Feasibility Study of the PS Injection for 2 GeV LIU Beams with an Upgraded KFA-45 Injection Kicker System Operating in Short Circuit Mode”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1363-1366. doi:10.18429/JACoW-IPAC2016-TUPMR049
[n]	J. A. Uythoven et al., “Possible Causes and Consequences of Serious Failures of the LHC Machine Protection System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT034, pp. 620-622. 
[n]	J. J. Murray, K. L. Brown, and T. Fieguth, “The Completed Design of the SLC Final Focus System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1331-1334. 
[n]	K. Nakao, K. Hayakawa, Y. Hayakawa, M. Inagaki, K. Nogami, and T. Tanaka, “Lasing of Near Infrared FEL with the Burst-mode Beam at LEBRA”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA28, pp. 535-538. 
[n]	H. Souda et al., “Observation of 2-Component Bunched Beam Signal with Laser Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD013, pp. 397-399. 
[n]	Y. Mori, H. Arima, N. Ikeda, Y. Yonemura, and Y. Waga, “Harmonictron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1063-1065. doi:10.18429/JACoW-IPAC2018-TUPAL029
[n]	A. Drozhdin et al., “Comparison of the TESLA, NLC and CLIC Beam-Collimation System Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB008, pp. 2739-2741. 
[n]	I. Ben-Zvi et al., “Development of S-band RF-gun in Waseda University”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B16, pp. 1666-1668. 
[n]	P. Bauer et al., “Recent RRR measurements on Niobium for Superconducting RF Cavities at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP47, pp. 352-354. 
[n]	R. Bodenstein et al., “Status of conceptual horizontal splitter design for FFA@CEBAF energy upgrade”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 596-600. doi:10.18429/JACoW-NAPAC2025-TUP094
[n]	M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 863-865. doi:10.18429/JACoW-LINAC2018-THPO076
[n]	S. R. Abbott, M. A. Leitner, C. M. Lyneis, C. E. Taylor, and D. C. Wutte, “Status of the Superconducting ECR Ion Source VENUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A01, pp. 1610-1612. 
[n]	M. P. Dunning et al., “Generation of Narrow-Band Coherent Tunable Terahertz Radiation using a Laser-Modulated Electron Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB015, pp. 1146-1148. 
[n]	A. S. Romanenko, D. Bafia, A. Grassellino, M. Martinello, and Y. Trenikhina, “First Direct Imaging and Profiling TOF-SIMS Studies on Cutouts from Cavities Prepared by State-of-the-Art Treatments”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 866-870. doi:10.18429/JACoW-SRF2019-THP014
[n]	A. D. Wu et al., “The Cryostat Results of Carbon Contamination and Plasma Cleaning for the Field Emission on the SRF Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1038-1040. doi:10.18429/JACoW-SRF2019-THP064
[n]	I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390. 
[n]	H.-J. Tsai, C. C. Chiang, P. J. Chou, and C.-C. Kuo, “Top-Up Safety Simulations for the TPS Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS073, pp. 1707-1709. 
[n]	Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n]	F. Antoniou et al., “LHC Luminosity Modeling for RUNII”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1403-1406. doi:10.18429/JACoW-IPAC2016-TUPMW002
[n]	E. Goutierre, H. Guler, C. Bruni, M. Sebag, and J. Cohen, “Surrogate Model for Linear Accelerator: A fast Neural Network approximation of ThomX's simulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4514-4517. doi:10.18429/JACoW-IPAC2023-THPL039
[n]	S. M. Shanab, K. Saito, and Y. Yamazaki, “Investigation of the Possibility of High Efficiency L-Band SRF Cavity for Medium-Beta Heavy Ion Multi-Charge-State Beams”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1035-1037. doi:10.18429/JACoW-SRF2019-THP063
[n]	D. Xiang et al., “First Principle Measurements of Thermal Emittance for Copper and Magnesium”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN055, pp. 1049-1051. 
[n]	N. G. Wilson, “Vacuum System Design Considerations of the Los Alamos Accelerator Test Stand (ATS)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-34, pp. 125-127. 
[n]	W. Pan, Q. Du, G. H. Gong, H. Li, and J. M. Li, “A Design of Sub-Nanosecond Timing and Data Acquisition Endpoint for LHAASO Project”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCA01, pp. 1442-1444. 
[n]	M. Wolf et al., “Expansion of the µTCA based direct sampling LLRF at MedAustron for hadron synchrotron applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4168-4170. doi:10.18429/JACoW-IPAC2023-THPA091
[n]	W. Seidel et al., “Three Years of CW-Operation at FELBE - Experiences and Applications”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH060, pp. 382-385. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search