Favourites
For Word
[n] B. Ng et al., “Control System for the MLI Model 1.2-400 Sychrotron Light Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1371-1374.
[n] S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 970-973. doi:10.18429/JACoW-ICALEPCS2015-WEPGF116
[n] G. Valentino et al., “Development and Beam Tests of an Automatic Algorithm for Alignment of LHC Collimators with Embedded BPMs”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI063, pp. 3439-3441.
[n] S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 177-179. doi:10.18429/JACoW-ICALEPCS2015-MOPGF037
[n] R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1456-1458. doi:10.18429/JACoW-IPAC2015-TUPWA023
[n] J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
[n] E. Schneidmiller and M. V. Yurkov, “Obtaining High Degree of Circular Polarization at X-ray FELs via a Reverse Undulator Taper”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2870-2872. doi:10.18429/JACoW-IPAC2014-THPRO008
[n] S. Molloy and E. Tanke, “DYNAC: Extensions, Updates, and Upgrades”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3784-3786. doi:10.18429/JACoW-IPAC2017-THPAB038
[n] R. Bruce, R. W. Assmann, and S. Redaelli, “Principles for Generation of Time-dependent Collimator Settings during the LHC Cycle”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ029, pp. 3753-3755.
[n] J. G. Neumann et al., “Simulations and Experiments of Electron Beams Pre-Modulated at the Photocathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB010, pp. 704-706.
[n] M. Hempel et al., “Performance and Upgrade of the Fast Beam Condition Monitor at CMS”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD03, pp. 134-138.
[n] A. Hedqvist, H. Danared, F. Hellberg, and J. Pflueger, “Field Characterization of XFEL Quadrupole Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC116, pp. 1338-1340.
[n] N. A. Kirby et al., “Emittance Measurement of Trapped Electrons from a Plasma Wakefield Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS070, pp. 4183-4185.
[n] F.-J. Decker et al., “Improving Beam Stability in the LCLS Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP038, pp. 2349-2351.
[n] S. M. Lidia et al., “Initial Commissioning of NDCX-II”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB005, pp. 85-87.
[n] C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 134-137. doi:10.18429/JACoW-ERL2019-THCOWBS06
[n] C. M. Caselle et al., “Ultra-fast Data Acquisition System for Coherent Synchrotron Radiation Based on Superconducting Terahertz Detectors”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOBB202, pp. 2094-2096.
[n] W. A. Pellico and D. Wildman, “Booster's Coupled Bunch Damper Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB077, pp. 3177-3179.
[n] C. Garc?¡a-Argos, R. Denz, S. Gabourin, C. Martin, B. Puccio, and A. P. Siemko, “Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1054-1056. doi:10.18429/JACoW-IPAC2015-MOPTY054
[n] G. S. Staats et al., “Kicker Development at the ELBE Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 520-522. doi:10.18429/JACoW-IPAC2014-MOPME067
[n] S. M. Liuzzo, D. Einfeld, L. Farvacque, and P. Raimondi, “Hybrid Multi Bend Achromat at 3 GeV for Future 4th Generation Light Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2822-2825. doi:10.18429/JACoW-IPAC2016-WEPOW006
[n] S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 180-183. doi:10.18429/JACoW-ICALEPCS2015-MOPGF038
[n] T. K. Charles et al., “Comparison of Bunch Compression Schemes for the AXXS FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1399-1402. doi:10.18429/JACoW-IPAC2015-TUPWA005
[n] E. Schneidmiller and M. V. Yurkov, “Harmonic Lasing in X-ray FELs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2873-2875. doi:10.18429/JACoW-IPAC2014-THPRO009
For LaTeX
Use Complete Form
For BibTeX
References
- B. Ng et al., “Control System for the MLI Model 1.2-400 Sychrotron Light Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1371-1374.
- S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 970-973.
- G. Valentino et al., “Development and Beam Tests of an Automatic Algorithm for Alignment of LHC Collimators with Embedded BPMs”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI063, pp. 3439-3441.
- S. L. Hoobler, S. C. Alverson, C. Cyterski, and R. C. Sass, “Upgrades to Control Room Knobs at Slac National Accelerator Laboratory”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 177-179.
- R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1456-1458.
- J. M. Weber and M. J. Chin, “ALS FPGA-based Transverse Feedback Electronics”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF017, pp. 130-132.
- E. Schneidmiller and M. V. Yurkov, “Obtaining High Degree of Circular Polarization at X-ray FELs via a Reverse Undulator Taper”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2870-2872.
- S. Molloy and E. Tanke, “DYNAC: Extensions, Updates, and Upgrades”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3784-3786.
- R. Bruce, R. W. Assmann, and S. Redaelli, “Principles for Generation of Time-dependent Collimator Settings during the LHC Cycle”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ029, pp. 3753-3755.
- J. G. Neumann et al., “Simulations and Experiments of Electron Beams Pre-Modulated at the Photocathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB010, pp. 704-706.
- M. Hempel et al., “Performance and Upgrade of the Fast Beam Condition Monitor at CMS”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD03, pp. 134-138.
- A. Hedqvist, H. Danared, F. Hellberg, and J. Pflueger, “Field Characterization of XFEL Quadrupole Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC116, pp. 1338-1340.
- N. A. Kirby et al., “Emittance Measurement of Trapped Electrons from a Plasma Wakefield Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS070, pp. 4183-4185.
- F.-J. Decker et al., “Improving Beam Stability in the LCLS Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP038, pp. 2349-2351.
- S. M. Lidia et al., “Initial Commissioning of NDCX-II”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB005, pp. 85-87.
- C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 134-137.
- C. M. Caselle et al., “Ultra-fast Data Acquisition System for Coherent Synchrotron Radiation Based on Superconducting Terahertz Detectors”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEOBB202, pp. 2094-2096.
- W. A. Pellico and D. Wildman, “Booster's Coupled Bunch Damper Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB077, pp. 3177-3179.
- C. Garc?¡a-Argos, R. Denz, S. Gabourin, C. Martin, B. Puccio, and A. P. Siemko, “Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1054-1056.
- G. S. Staats et al., “Kicker Development at the ELBE Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 520-522.
- S. M. Liuzzo, D. Einfeld, L. Farvacque, and P. Raimondi, “Hybrid Multi Bend Achromat at 3 GeV for Future 4th Generation Light Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2822-2825.
- S. L. Hoobler et al., “Design and Commissioning Results of MicroTCA Stripline BPM System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 180-183.
- T. K. Charles et al., “Comparison of Bunch Compression Schemes for the AXXS FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1399-1402.
- E. Schneidmiller and M. V. Yurkov, “Harmonic Lasing in X-ray FELs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2873-2875.
Back to search