Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. F. Stroosnijder and K. Abbas, “Thin Layer Activation for Materials Research Development at IAM of the European Commission”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-10, pp. 52-57.
[n] N. Delerue, G. Doucas, E. Maclean, and A. Reichold, “Longitudinal Bunch Profile Diagnostics in the 50-femtoseconds Range using Coherent Smith-Purcell Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE076, pp. 1155-1157.
[n] T. Spangenberg, D. Haas, and W. Mexner, “Smart Structured Measurement Process for Versatile Synchrotron Beamline Data at ANKA”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD19, pp. 40-42.
[n] W. S. Trzeciak, “A Wavelength Shifter" for the University of Wisconsin Electron Storage Ring"”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 213-217.
[n] F. Zimmermann et al., “Single-pass Beam Measurements for the Verification of the LHC Magnetic Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC015, pp. 489-491.
[n] K. Y. Ng, S. Y. Lee, and D. Trbojevic, “A Transitionless Lattice for the Fermilab Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 159-162.
[n] A. Hocker et al., “Individual RF Test Results of the Cavities Used in the First US-built ILC-type Cryomodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC049, pp. 2321-2323.
[n] M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM06, pp. XX-XX.
[n] H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
[n] W. S. Trzeciak, “Longitudinal Space Charge Effects in RF Buckets”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 612-624.
[n] R. Seviour, I. R. Bailey, and H. L. Owen, “Compact Accelerator Based Neutron Source for 99mTc Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1946-1949. doi:10.18429/JACoW-IPAC2016-TUPOY020
[n] M. Kondoh et al., “RF Accelerator in KEK Main Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3950-3953.
[n] A. A. Drozdovsky et al., “Installation for the Research of Z-Pinch Plasma Initiated by the Electron Beam”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 258-260. doi:10.18429/JACoW-RUPAC2016-TUPSA020
[n] S. M. White, R. Alemany-Fernandez, H. Burkhardt, and M. Lamont, “First Luminosity Scans in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC014, pp. 486-488.
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] R. T. P. D, J. K. Jones, and B. D. Muratori, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP136, pp. 1734-1736.
[n] S. L. Sheehy and C. Johnstone, “A 1 GeV CW FFAG High Intensity Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB003, pp. 3234-3236.
[n] J. A. Clarke et al., “Update on Commissioning and Operations with the Second Superconducting Wiggler at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 648-651.
[n] D. Haas, W. Mexner, H. Pasic, and T. Spangenberg, “Implementation of an Overall Data Management at the Tomography Station at ANKA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC005, pp. 558-561.
[n] M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
[n] Korotaev I., “The PC Based Control and Data Acquisition System of LEPTA”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P54, pp. XX-XX.
[n] A. Facco et al., “Superconducting Resonators Development for the FRIB and ReA Linacs at MSU: Recent Achievements and Future Goals”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOAC03, pp. 61-63.
For LaTeX
Use Complete Form
For BibTeX
References
- M. F. Stroosnijder and K. Abbas, “Thin Layer Activation for Materials Research Development at IAM of the European Commission”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-10, pp. 52-57.
- N. Delerue, G. Doucas, E. Maclean, and A. Reichold, “Longitudinal Bunch Profile Diagnostics in the 50-femtoseconds Range using Coherent Smith-Purcell Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE076, pp. 1155-1157.
- T. Spangenberg, D. Haas, and W. Mexner, “Smart Structured Measurement Process for Versatile Synchrotron Beamline Data at ANKA”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD19, pp. 40-42.
- W. S. Trzeciak, “A Wavelength Shifter" for the University of Wisconsin Electron Storage Ring"”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 213-217.
- F. Zimmermann et al., “Single-pass Beam Measurements for the Verification of the LHC Magnetic Model”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC015, pp. 489-491.
- K. Y. Ng, S. Y. Lee, and D. Trbojevic, “A Transitionless Lattice for the Fermilab Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 159-162.
- A. Hocker et al., “Individual RF Test Results of the Cavities Used in the First US-built ILC-type Cryomodule”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC049, pp. 2321-2323.
- M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM06, pp. XX-XX.
- H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
- W. S. Trzeciak, “Longitudinal Space Charge Effects in RF Buckets”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 612-624.
- R. Seviour, I. R. Bailey, and H. L. Owen, “Compact Accelerator Based Neutron Source for 99mTc Production”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1946-1949.
- M. Kondoh et al., “RF Accelerator in KEK Main Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3950-3953.
- A. A. Drozdovsky et al., “Installation for the Research of Z-Pinch Plasma Initiated by the Electron Beam”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 258-260.
- S. M. White, R. Alemany-Fernandez, H. Burkhardt, and M. Lamont, “First Luminosity Scans in the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC014, pp. 486-488.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- R. T. P. D, J. K. Jones, and B. D. Muratori, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP136, pp. 1734-1736.
- S. L. Sheehy and C. Johnstone, “A 1 GeV CW FFAG High Intensity Proton Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB003, pp. 3234-3236.
- J. A. Clarke et al., “Update on Commissioning and Operations with the Second Superconducting Wiggler at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 648-651.
- D. Haas, W. Mexner, H. Pasic, and T. Spangenberg, “Implementation of an Overall Data Management at the Tomography Station at ANKA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC005, pp. 558-561.
- M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
- Korotaev I., “The PC Based Control and Data Acquisition System of LEPTA”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P54, pp. XX-XX.
- A. Facco et al., “Superconducting Resonators Development for the FRIB and ReA Linacs at MSU: Recent Achievements and Future Goals”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOAC03, pp. 61-63.
Back to search