Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. H. Miller, C. H. Kim, and F. Selph, “Design of a Bunching System for a High-Intensity Electron LINAC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 863-866.
[n] R. Calaga, F. Franchi, and R. Tomas, “Global and Local Coupling Compensation in RHIC using AC Dipoles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI03, pp. 2774-2776.
[n] H. Lengeler, “Superconducting Cavities for Neutron Spallation Sources and other High Intensity Proton Accelerators”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E02, pp. XX-XX.
[n] Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
[n] V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 206-212. doi:10.18429/JACoW-ICALEPCS2017-TUBPA04
[n] T. Brochard, P. M. Brumund, L. Goirand, J. Pasquaud, and S. M. White, “RF Fingers for the New ESRF-EBS Storage Ring”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 11-14. doi:10.18429/JACoW-MEDSI2018-TUOPMA07
[n] D. Winklehner, J. Y. Benitez, D. P. Grote, D. Leitner, M. M. Strohmeier, and D. S. Todd, “Comparison of Extraction and Beam Transport Simulations with Emittance Measurements from the ECR Ion Source VENUS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM058, pp. 287-291.
[n] J. Katuin, “Proton Therapy Treatment Room Controls Using a Linux Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG026, pp. 1068-1070.
[n] T. Grimm, T. R. Bieler, C. Compton, and H. Jiang, “Mechanical Properties, Microstructure, and Texture of Electron Beam Butt Welds in High Purity Niobium”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB069, pp. 1359-1361.
[n] J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
[n] R. Michnoff, T. D'Ottavio, L. Hoff, W. MacKay, and T. Satogata, “RHIC Data Correlation Methodology”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP18, pp. 693-695.
[n] N. A. Vinokurov et al., “Novosibirsk Four-Orbit ERL With Three FELs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4836-4841. doi:10.18429/JACoW-IPAC2017-FRXBB1
[n] J. Boillot, B. Frammery, and E. Wildner, “The CERN-PS Controls System Operational Aspects”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1782-1785.
[n] J. Bosser et al., “Results on Lead Ion Accumulation in LEAR for the LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEOA01A, pp. 253-255.
[n] M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
[n] K. A. Drees, R. P. Fliller III, W. Fu, and R. Michnoff, “Continuous Abort Gap Cleaning at RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT162, pp. 908-910.
[n] G. V. Dolbilov, A. A. Fateev, V. A. Petrov, and A. I. Sidorov, “Development of Nanosecond Pulsed Generators for Linear Induction Accelerators at JINR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-02, pp. 360-362.
[n] G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356.
[n] B. Bradu, E. Blanco Vinuela, R. Marti, and F. M. Tilaro, “Automatic PID Performance Monitoring Applied to LHC Cryogenics”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1017-1023. doi:10.18429/JACoW-ICALEPCS2017-WEAPL02
[n] C. E. Clayton et al., “Table of Contents - viii A Broadband Electron Spectrometer and Electron Detectors for Laser Accelerator Experiments”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG08, pp. 637-639.
[n] A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and P. A. Posocco, “Design of the High Current Linac of SPES Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP079, pp. 3545-3547.
[n] G. S. Abrams et al., “Fast Energy and Energy Spectrum Feedback in the SLC Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1258-1261.
[n] C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616.
[n] M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
[n] S. Morita et al., “The Tohoku University 680 Model Cyclotron and Facility”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-12, pp. 1930-1933.
[n] V. Serriere et al., “Status of HOM Damped Room-temperature Cavities for the ESRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP108, pp. 808-810.
[n] W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, “NSLS2 Fill Pattern Monitor and Control”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 246-250. doi:10.18429/JACoW-IBIC2015-MOPB082
[n] J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2952-2955. doi:10.18429/JACoW-IPAC2015-WEPMN015
[n] Y. Wada, T. Kubota, and A. Ogata, “Ion and Neutral Beam Generation by 1TW, 50fs Laser Irradiation of Thin Foils”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB023, pp. 3335-3337.
[n] T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1240-1242. doi:10.18429/JACoW-IPAC2023-MOPM112
[n] J. J. Petillo and A. Mondelli, “LEBT Modeling with ARGUS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 315-318.
[n] G. Gulbekyan, O. N. Borisov, and V. I. Kazacha, “Extraction by Stripping of Heavy Ion Beams from Cyclotrons”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-02, pp. 286-290.
[n] J. Flanz, E. Ihloff, R. Averill, and D. Tieger, “Octupole Magnet Design for the 1/2 Integer Resonant Extraction of Electrons from the South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2871-2874.
[n] M. M. Dehler, “Multipole Effects in the RF Gun for the PSI Injector”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC017, pp. 285-288.
[n] M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1554-1556. doi:10.18429/JACoW-IPAC2019-TUPGW066
[n] G. I. Cancelo, B. Chase, Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB062, pp. 618-620.
[n] W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 919-922. doi:10.18429/JACoW-ICALEPCS2015-WEPGF094
[n] J. F. DeFord, B. L. Held, and A. A. Nichols, “Recent Improvements in Particle Simulation Support in Analyst-MP”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA29, pp. 1295-1297.
[n] V. Aleksandrov, A. A. Fateev, and A. Tuzikov, “The Nonsymmetrical Variant of the Nonferromagnetic Extraction Kicker Magnet of the NICA Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 566-568. doi:10.18429/JACoW-RUPAC2016-THPSC013
[n] A. V. Smirnov et al., “Development of a Compact Insertion Device for Coherent Sub-mm Generation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA080, pp. 2295-2297.
For LaTeX
Use Complete Form
For BibTeX
References
- R. H. Miller, C. H. Kim, and F. Selph, “Design of a Bunching System for a High-Intensity Electron LINAC”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 863-866.
- R. Calaga, F. Franchi, and R. Tomas, “Global and Local Coupling Compensation in RHIC using AC Dipoles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOAFI03, pp. 2774-2776.
- H. Lengeler, “Superconducting Cavities for Neutron Spallation Sources and other High Intensity Proton Accelerators”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93E02, pp. XX-XX.
- Yu. Shatunov and V. Yakimenko, “Simulation of the Acceleration of Polarized Protons in Circular Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR31, pp. 3427-3430.
- V. H. Hardion et al., “The MAX IV Laboratory Scientific Data Management”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 206-212.
- T. Brochard, P. M. Brumund, L. Goirand, J. Pasquaud, and S. M. White, “RF Fingers for the New ESRF-EBS Storage Ring”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 11-14.
- D. Winklehner, J. Y. Benitez, D. P. Grote, D. Leitner, M. M. Strohmeier, and D. S. Todd, “Comparison of Extraction and Beam Transport Simulations with Emittance Measurements from the ECR Ion Source VENUS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM058, pp. 287-291.
- J. Katuin, “Proton Therapy Treatment Room Controls Using a Linux Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG026, pp. 1068-1070.
- T. Grimm, T. R. Bieler, C. Compton, and H. Jiang, “Mechanical Properties, Microstructure, and Texture of Electron Beam Butt Welds in High Purity Niobium”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB069, pp. 1359-1361.
- J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
- R. Michnoff, T. D'Ottavio, L. Hoff, W. MacKay, and T. Satogata, “RHIC Data Correlation Methodology”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP18, pp. 693-695.
- N. A. Vinokurov et al., “Novosibirsk Four-Orbit ERL With Three FELs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4836-4841.
- J. Boillot, B. Frammery, and E. Wildner, “The CERN-PS Controls System Operational Aspects”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1782-1785.
- J. Bosser et al., “Results on Lead Ion Accumulation in LEAR for the LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEOA01A, pp. 253-255.
- M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
- K. A. Drees, R. P. Fliller III, W. Fu, and R. Michnoff, “Continuous Abort Gap Cleaning at RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT162, pp. 908-910.
- G. V. Dolbilov, A. A. Fateev, V. A. Petrov, and A. I. Sidorov, “Development of Nanosecond Pulsed Generators for Linear Induction Accelerators at JINR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-02, pp. 360-362.
- G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1353-1356.
- B. Bradu, E. Blanco Vinuela, R. Marti, and F. M. Tilaro, “Automatic PID Performance Monitoring Applied to LHC Cryogenics”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1017-1023.
- C. E. Clayton et al., “Table of Contents - viii A Broadband Electron Spectrometer and Electron Detectors for Laser Accelerator Experiments”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG08, pp. 637-639.
- A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and P. A. Posocco, “Design of the High Current Linac of SPES Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP079, pp. 3545-3547.
- G. S. Abrams et al., “Fast Energy and Energy Spectrum Feedback in the SLC Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1258-1261.
- C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616.
- M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
- S. Morita et al., “The Tohoku University 680 Model Cyclotron and Facility”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-12, pp. 1930-1933.
- V. Serriere et al., “Status of HOM Damped Room-temperature Cavities for the ESRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP108, pp. 808-810.
- W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and G. M. Wang, “NSLS2 Fill Pattern Monitor and Control”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 246-250.
- J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2952-2955.
- Y. Wada, T. Kubota, and A. Ogata, “Ion and Neutral Beam Generation by 1TW, 50fs Laser Irradiation of Thin Foils”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB023, pp. 3335-3337.
- T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM112, pp. 1240-1242.
- J. J. Petillo and A. Mondelli, “LEBT Modeling with ARGUS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 315-318.
- G. Gulbekyan, O. N. Borisov, and V. I. Kazacha, “Extraction by Stripping of Heavy Ion Beams from Cyclotrons”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-02, pp. 286-290.
- J. Flanz, E. Ihloff, R. Averill, and D. Tieger, “Octupole Magnet Design for the 1/2 Integer Resonant Extraction of Electrons from the South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2871-2874.
- M. M. Dehler, “Multipole Effects in the RF Gun for the PSI Injector”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC017, pp. 285-288.
- M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1554-1556.
- G. I. Cancelo, B. Chase, Y. I. Eidelman, S. Nagaitsev, and N. Solyak, “Longitudinal Dynamic Analysis for the Project X 3-8 GeV Pulsed Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB062, pp. 618-620.
- W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 919-922.
- J. F. DeFord, B. L. Held, and A. A. Nichols, “Recent Improvements in Particle Simulation Support in Analyst-MP”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA29, pp. 1295-1297.
- V. Aleksandrov, A. A. Fateev, and A. Tuzikov, “The Nonsymmetrical Variant of the Nonferromagnetic Extraction Kicker Magnet of the NICA Booster”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 566-568.
- A. V. Smirnov et al., “Development of a Compact Insertion Device for Coherent Sub-mm Generation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA080, pp. 2295-2297.
Back to search