Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Zimmermann et al., “FCC-ee Overview”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H1, pp. 6-15.
[n] D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
[n] P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 308-311. doi:10.18429/JACoW-IPAC2019-MOPGW086
[n] A. Tremaine et al., “Saturation Measurements of a Visible SASE FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH122, pp. 2760-2762.
[n] W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
[n] A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
[n] G. Shen and M. R. Kraimer, “Server Development for NSLS-II Physics Applications and Performance Analysis”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP252, pp. 585-587.
[n] G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 343-346.
[n] R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2631-2634.
[n] A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
[n] S. Werin et al., “First Results of Coherent Harmonic Generation at the MAX-Lab Test Fel”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOA4, pp. 340-343.
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] K. D. Joshi and K. Reju, “Design and Analysis of Second Harmonics Modulator for DC Current Transformer”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD05, pp. 145-147.
[n] J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
[n] D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
[n] E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n] S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
[n] D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 319-322. doi:10.18429/JACoW-RUPAC2018-WEPSB17
[n] P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 305-307. doi:10.18429/JACoW-IPAC2019-MOPGW085
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] K. Bourkland, C. Curtis, G. Lee, and G. Tool, “Improved FNAL Linac Beam Choppers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2994-2997.
[n] A. I. Al-Shamma et al., “Novel Techniques using FEM for Material Production and Processing”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP053, pp. XX-XX.
[n] E. Keil, A. Sessler, and D. Trbojevic, “Fixed Field Alternating Gradient Accelerators (FFAG) for Fast Hadron Cancer Therapy”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP020, pp. 1667-1669.
[n] M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
[n] S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
[n] M. L. Neubauer, M. Borland, A. Dudas, R. Nassiri, and R. Sah, “Adjustable High Power Coax RF Coupler with No Moving Parts”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB059, pp. 4008-4010.
[n] H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 245-252. doi:10.18429/JACoW-ICALEPCS2017-TUCPA01
[n] G. R. White et al., “Recent Advancements and Deployments of EPICS Version 4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 589-592. doi:10.18429/JACoW-ICALEPCS2015-WEA3O02
[n] J. C. Frisch et al., “A FPGA Based Common Platform for LCLS2 Beam Diagnostics and Controls”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 650-653. doi:10.18429/JACoW-IBIC2016-WEPG15
[n] J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] D. Van Winkle et al., “The SLAC LINAC LLRF Controls Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 654-657. doi:10.18429/JACoW-IBIC2016-WEPG16
[n] R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4307-4310. doi:10.18429/JACoW-IPAC2017-THPIK094
[n] A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1485-1488. doi:10.18429/JACoW-IPAC2016-TUPMW025
[n] J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
[n] J. Safranek et al., “SPEAR3 Commissioning”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOA102, pp. XX-XX.
[n] S. Martin, S. Lenz, and E. Pivit, “A Stripline Design of a Fast Ferriete Tuner (FFT)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 985-988.
[n] V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1044-1046. doi:10.18429/JACoW-ICALEPCS2015-WEPGF145
[n] S. Seletskiy, R. P. Fliller, S. L. Kramer, and T. V. Shaftan, “Energy Interlock in the NSLS II Booster to Storage Ring Transfer Line”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1986-1988. doi:10.18429/JACoW-IPAC2014-WEPRO020
[n] G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
[n] L. Emery, M. Borland, G. Decker, K. C. Harkay, E. R. Moog, and R. Nassiri, “Accelerator Aspects of the Advance Photon Source Upgrade”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS2, pp. 766-768.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Zimmermann et al., “FCC-ee Overview”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H1, pp. 6-15.
- D. Anderson et al., “RF Power Source Development at the RTA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP071L, pp. 2149-2151.
- P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 308-311.
- A. Tremaine et al., “Saturation Measurements of a Visible SASE FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH122, pp. 2760-2762.
- W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
- A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
- G. Shen and M. R. Kraimer, “Server Development for NSLS-II Physics Applications and Performance Analysis”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP252, pp. 585-587.
- G. Le Dallic et al., “First Test Results from the New CERN Plasma Lens”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 343-346.
- R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2631-2634.
- A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
- S. Werin et al., “First Results of Coherent Harmonic Generation at the MAX-Lab Test Fel”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOA4, pp. 340-343.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- K. D. Joshi and K. Reju, “Design and Analysis of Second Harmonics Modulator for DC Current Transformer”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD05, pp. 145-147.
- J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539.
- D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
- E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
- S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
- D. B. Shwartz et al., “New Quadrupoles Installed at VEPP-2000 for High Energy Operation Without Final Focus”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 319-322.
- P. Korysko, P. Burrows, and A. Latina, “Intensity Dependent Effects in the ILC BDS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 305-307.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- K. Bourkland, C. Curtis, G. Lee, and G. Tool, “Improved FNAL Linac Beam Choppers”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2994-2997.
- A. I. Al-Shamma et al., “Novel Techniques using FEM for Material Production and Processing”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP053, pp. XX-XX.
- E. Keil, A. Sessler, and D. Trbojevic, “Fixed Field Alternating Gradient Accelerators (FFAG) for Fast Hadron Cancer Therapy”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP020, pp. 1667-1669.
- M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
- S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
- M. L. Neubauer, M. Borland, A. Dudas, R. Nassiri, and R. Sah, “Adjustable High Power Coax RF Coupler with No Moving Parts”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB059, pp. 4008-4010.
- H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 245-252.
- G. R. White et al., “Recent Advancements and Deployments of EPICS Version 4”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 589-592.
- J. C. Frisch et al., “A FPGA Based Common Platform for LCLS2 Beam Diagnostics and Controls”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 650-653.
- J. Tratnik et al., “Femtosecond Electro-optical Synchronization System over Distance up to 300 m”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA03, pp. 772-775.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- D. Van Winkle et al., “The SLAC LINAC LLRF Controls Upgrade”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 654-657.
- R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4307-4310.
- A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1485-1488.
- J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
- J. Safranek et al., “SPEAR3 Commissioning”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOA102, pp. XX-XX.
- S. Martin, S. Lenz, and E. Pivit, “A Stripline Design of a Fast Ferriete Tuner (FFT)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 985-988.
- V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1044-1046.
- S. Seletskiy, R. P. Fliller, S. L. Kramer, and T. V. Shaftan, “Energy Interlock in the NSLS II Booster to Storage Ring Transfer Line”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1986-1988.
- G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
- L. Emery, M. Borland, G. Decker, K. C. Harkay, E. R. Moog, and R. Nassiri, “Accelerator Aspects of the Advance Photon Source Upgrade”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCS2, pp. 766-768.
Back to search