Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Favourites
For Word
[n] E. Karantzoulis and M. Lonza, “Transverse Head-tail Modes Elimination with Negative Chromaticity and the Transverse Multi-bunch Feedback System at ELETTRA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH045, pp. 2886-2888.
[n] W. M. Fawley and J.-L. Vay, “Fully Electromagnetic FEL Simulation via Lorentz-Boosted Frame Transformation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB01, pp. 48-51.
[n] C. Scafuri, “Operational Status Display and Automation Tools for FERMI@Elettra”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN013, pp. 263-266.
[n] L. Pivetta, A. I. Bogani, and R. Passuello, “Management of the FERMI Control System Infrastructure”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THMIB09, pp. 1086-1089.
[n] C. Serpico, M. Dal Forno, and A. Fabris, “Optimization of the SLED Phase Modulation Parameters of the FERMI Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA01, pp. 981-983.
[n] C. Serpico, G. D'Auria, and P. Delgiusto, “Thermal Control of the Fermi@Elettra Accelerating Sections”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP047, pp. 4414-4416.
[n] M. M. El-Ashmawy and G. D'Auria, “ABCI-based Analytical Model for Calculating the Transverse Kick Factor in Axi-symmetric Step-out Transition”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD035, pp. 2006-2008.
[n] J. Zemella, W. M. Fawley, T. J. Maxwell, and R. R. Lindberg, “Time Dependent Study for an X-ray FEL Oscillator at LCLS-II”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 433-435. doi:10.18429/JACoW-FEL2015-TUP030
[n] P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. Müller, “New On-line Gain Drift Compensation for Resonant Current Monitor under Heavy Heat Load”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE063, pp. 1122-1124.
[n] A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and P. A. Posocco, “Design of the High Current Linac of SPES Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP079, pp. 3545-3547.
[n] R. De Monte, J.-C. Denard, M. Ferianis, T. Monaci, L. Tosi, and R. Ursic, “ELETTRA BPM System (Hardward and Software): First Results”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1530-1533.
[n] D. F. Ratner et al., “FEL Gain length and Taper Measurements at LCLS”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUOA03, pp. 221-224.
[n] F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 777-781. doi:10.18429/JACoW-ICALEPCS2015-WEPGF037
[n] E. Weihreter et al., “A 7T Multipole Wiggler in BESSY II: Implementation and Commissioning Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF012, pp. 324-326.
[n] Y. Wei et al., “Dual-Grating Dielectric Accelerators Driven by A Pulse-Front-Tilted Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3299-3301. doi:10.18429/JACoW-IPAC2017-WEPVA020
[n] G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 249-252. doi:10.18429/JACoW-IBIC2019-TUBO02
[n] D. Bulfone, R. De Monte, M. Ferianis, V. Forchi, and M. Lonza, “Fast Orbit Feedback Developments at ELETTRA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT053, pp. 2604-2606.
[n] J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
[n] M. M. El-Ashmawy and G. D'Auria, “Short Range Wakefields Studies of Step-out and Taper-out Transitions Adjacent to X-band Linac in FERMI@elettra”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD033, pp. 2000-2002.
[n] G. Bisoffi et al., “Superconducting RFQs”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP05, pp. 123-127.
[n] V. del Pozo Romano et al., “High Power Conditioning of X-Band Variable Power Splitter and Phase Shifter”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2964-2967. doi:10.18429/JACoW-IPAC2019-WEPRB064
[n] M. M. El-Ashmawy, G. D'Auria, and S. Di Mitri, “Electron Beam Dynamics in CERN-PSI-ELETTRA 5/6 Traveling Wave X-band Linear Accelerator.”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE064, pp. 4662-4664.
[n] A. Palmieri, F. Grespan, and A. Pisent, “Tuning the IFMIF 5MeV RFQ Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 969-971. doi:10.18429/JACoW-LINAC2016-THPLR049
[n] J.-L. Vay, E. Cormier-Michel, W. M. Fawley, C. G. R. Geddes, and D. P. Grote, “Application of the Reduction of Scale Range in a Lorentz Boosted Frame to the Numerical Simulation of Particle Acceleration Devices”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1PBI04, pp. 641-645.
[n] R. De Monte, “The new Diode BPM system for ELETTRA”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC13, pp. 177-179.
[n] M. M. Dehler et al., “Alignment Monitors for an X Band Accelerating Structure”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD04, pp. 47-49.
[n] M. Trovo, S. M. Lidia, and G. Penco, “Further Studies in the FERMI@ELETTRA Photoninjector Optimization”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH028, pp. 625-628.
[n] A. Bosotti, R. De Monte, M. Ferianis, R. Lange, C. Pagani, and P. Pierini, “Analysis of the Cold Mass Displacements at the TTF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF035, pp. 1681-1683.
[n] G. D'Auria et al., “Baseline Design of the Linac Upgrade for Fermi”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH019, pp. 92-94.
[n] G. Strangolino, M. Lonza, and L. Pivetta, “Time Travel Made Possible at FERMI by the Time-Machine Application”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1059-1062. doi:10.18429/JACoW-ICALEPCS2015-WEPGF152
For LaTeX
Use Complete Form
For BibTeX
References
- E. Karantzoulis and M. Lonza, “Transverse Head-tail Modes Elimination with Negative Chromaticity and the Transverse Multi-bunch Feedback System at ELETTRA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH045, pp. 2886-2888.
- W. M. Fawley and J.-L. Vay, “Fully Electromagnetic FEL Simulation via Lorentz-Boosted Frame Transformation”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB01, pp. 48-51.
- C. Scafuri, “Operational Status Display and Automation Tools for FERMI@Elettra”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN013, pp. 263-266.
- L. Pivetta, A. I. Bogani, and R. Passuello, “Management of the FERMI Control System Infrastructure”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THMIB09, pp. 1086-1089.
- C. Serpico, M. Dal Forno, and A. Fabris, “Optimization of the SLED Phase Modulation Parameters of the FERMI Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA01, pp. 981-983.
- C. Serpico, G. D'Auria, and P. Delgiusto, “Thermal Control of the Fermi@Elettra Accelerating Sections”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP047, pp. 4414-4416.
- M. M. El-Ashmawy and G. D'Auria, “ABCI-based Analytical Model for Calculating the Transverse Kick Factor in Axi-symmetric Step-out Transition”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD035, pp. 2006-2008.
- J. Zemella, W. M. Fawley, T. J. Maxwell, and R. R. Lindberg, “Time Dependent Study for an X-ray FEL Oscillator at LCLS-II”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 433-435.
- P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. Müller, “New On-line Gain Drift Compensation for Resonant Current Monitor under Heavy Heat Load”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE063, pp. 1122-1124.
- A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and P. A. Posocco, “Design of the High Current Linac of SPES Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP079, pp. 3545-3547.
- R. De Monte, J.-C. Denard, M. Ferianis, T. Monaci, L. Tosi, and R. Ursic, “ELETTRA BPM System (Hardward and Software): First Results”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1530-1533.
- D. F. Ratner et al., “FEL Gain length and Taper Measurements at LCLS”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUOA03, pp. 221-224.
- F. Bill?¿ et al., “Data Lifecycle in Large Experimental Physics Facilities: The Approach of the Synchrotron ELETTRA and the Free Electron Laser FERMI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 777-781.
- E. Weihreter et al., “A 7T Multipole Wiggler in BESSY II: Implementation and Commissioning Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF012, pp. 324-326.
- Y. Wei et al., “Dual-Grating Dielectric Accelerators Driven by A Pulse-Front-Tilted Laser”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3299-3301.
- G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 249-252.
- D. Bulfone, R. De Monte, M. Ferianis, V. Forchi, and M. Lonza, “Fast Orbit Feedback Developments at ELETTRA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT053, pp. 2604-2606.
- J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188.
- M. M. El-Ashmawy and G. D'Auria, “Short Range Wakefields Studies of Step-out and Taper-out Transitions Adjacent to X-band Linac in FERMI@elettra”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD033, pp. 2000-2002.
- G. Bisoffi et al., “Superconducting RFQs”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP05, pp. 123-127.
- V. del Pozo Romano et al., “High Power Conditioning of X-Band Variable Power Splitter and Phase Shifter”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2964-2967.
- M. M. El-Ashmawy, G. D'Auria, and S. Di Mitri, “Electron Beam Dynamics in CERN-PSI-ELETTRA 5/6 Traveling Wave X-band Linear Accelerator.”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE064, pp. 4662-4664.
- A. Palmieri, F. Grespan, and A. Pisent, “Tuning the IFMIF 5MeV RFQ Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 969-971.
- J.-L. Vay, E. Cormier-Michel, W. M. Fawley, C. G. R. Geddes, and D. P. Grote, “Application of the Reduction of Scale Range in a Lorentz Boosted Frame to the Numerical Simulation of Particle Acceleration Devices”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1PBI04, pp. 641-645.
- R. De Monte, “The new Diode BPM system for ELETTRA”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC13, pp. 177-179.
- M. M. Dehler et al., “Alignment Monitors for an X Band Accelerating Structure”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD04, pp. 47-49.
- M. Trovo, S. M. Lidia, and G. Penco, “Further Studies in the FERMI@ELETTRA Photoninjector Optimization”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH028, pp. 625-628.
- A. Bosotti, R. De Monte, M. Ferianis, R. Lange, C. Pagani, and P. Pierini, “Analysis of the Cold Mass Displacements at the TTF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF035, pp. 1681-1683.
- G. D'Auria et al., “Baseline Design of the Linac Upgrade for Fermi”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH019, pp. 92-94.
- G. Strangolino, M. Lonza, and L. Pivetta, “Time Travel Made Possible at FERMI by the Time-Machine Application”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1059-1062.
Back to search