Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
[n] A. S. Parfenova, C. Baumgarten, J. M. Humbel, A. C. Mezger, and A. V. Petrenko, “Measurements of the Beam Phase Response to Correcting Magnetic Fields in PSI Cyclotrons”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1271-1273. doi:10.18429/JACoW-IPAC2016-TUPMR019
[n] S. W. Mosko, D. T. Dowling, and D. K. Olsen, “Prototype RF Cavity for the HISTRAP Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 193-196.
[n] M. Schuett, U. Ratzinger, and M. Syha, “RF Measurements and Tuning of the 325 MHz Ladder-RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 925-927. doi:10.18429/JACoW-IPAC2019-MOPTS033
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2698-2701. doi:10.18429/JACoW-IPAC2015-WEPJE012
[n] B. Klump, U. Ratzinger, W. Schweizer, and K. Volk, “Development of a Pepper Pot Emittance Measurement Device for FRANZ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP063, pp. 199-201.
[n] Y. Miyahara, “Analysis of Tranverse Coherant Instability in KEK Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3535-3538.
[n] T.-Y. Lee, H.-S. Kang, and H.-S. Lee, “A FFAG Design Study for an Accelerator-driven System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD018, pp. 403-405.
[n] Z. M. Dai, D. M. Li, G. Q. Lin, G. Y. Wu, M. Chen, and Z. T. Zhao, “An Intense Electron Linac for Pulsed Radiolysis Research at SINAP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11011, pp. XX-XX.
[n] D. Kim et al., “Analysis of Electron Beam Divergence in Diamond Field Emitter Array Cathodes”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2090-2093. doi:10.18429/JACoW-IPAC2019-TUPTS073
[n] S. Sawamura, T. Fujiwara, M. Katagiri, M. Kitaichi, O. Narita, and I. Nojiri, “Monte Carlo Calculations of Dose Equivalents for High Energy Electrons Using the MIRD-5 Human Phantom”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-93, pp. 585-587.
[n] M. Lee et al., “Lattice Commissioning Strategy for the B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P093, pp. 2586-2588.
[n] M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
[n] V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
[n] S. Rodriguez Esparza et al., “Mechanical Design and Evaluation of the MP-11-like Wire Scanner Prototype”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR083, pp. 984-986.
[n] W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 231. doi:10.18429/JACoW-ICALEPCS2019-MOPHA017
[n] T. Matsumoto, Y. Hamada, and Y. Furukawa, “MADOCA II Data Collection Framework for SPring-8”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 39-44. doi:10.18429/JACoW-ICALEPCS2017-MOBPL04
[n] B. P. Xiao et al., “Crosstalk Effect in the LEReC Booster Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 47-49. doi:10.18429/JACoW-LINAC2018-MOPO006
[n] G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
[n] M. Pezzetti, B. Bradu, P. Gayet, and J. Vasseur, “Helium Cryoplant Off-line Commissioning and Operator Training: Two Applications of the PROCOS Simulation System at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP059, pp. 513-515.
[n] S. M. H. Alsari, M. Aslaninejad, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “RF Delivery System for FETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3902-3904. doi:10.18429/JACoW-IPAC2014-THPRI058
For LaTeX
Use Complete Form
For BibTeX
References
- K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
- A. S. Parfenova, C. Baumgarten, J. M. Humbel, A. C. Mezger, and A. V. Petrenko, “Measurements of the Beam Phase Response to Correcting Magnetic Fields in PSI Cyclotrons”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1271-1273.
- S. W. Mosko, D. T. Dowling, and D. K. Olsen, “Prototype RF Cavity for the HISTRAP Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 193-196.
- M. Schuett, U. Ratzinger, and M. Syha, “RF Measurements and Tuning of the 325 MHz Ladder-RFQ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 925-927.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2698-2701.
- B. Klump, U. Ratzinger, W. Schweizer, and K. Volk, “Development of a Pepper Pot Emittance Measurement Device for FRANZ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP063, pp. 199-201.
- Y. Miyahara, “Analysis of Tranverse Coherant Instability in KEK Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3535-3538.
- T.-Y. Lee, H.-S. Kang, and H.-S. Lee, “A FFAG Design Study for an Accelerator-driven System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD018, pp. 403-405.
- Z. M. Dai, D. M. Li, G. Q. Lin, G. Y. Wu, M. Chen, and Z. T. Zhao, “An Intense Electron Linac for Pulsed Radiolysis Research at SINAP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11011, pp. XX-XX.
- D. Kim et al., “Analysis of Electron Beam Divergence in Diamond Field Emitter Array Cathodes”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2090-2093.
- S. Sawamura, T. Fujiwara, M. Katagiri, M. Kitaichi, O. Narita, and I. Nojiri, “Monte Carlo Calculations of Dose Equivalents for High Energy Electrons Using the MIRD-5 Human Phantom”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-93, pp. 585-587.
- M. Lee et al., “Lattice Commissioning Strategy for the B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P093, pp. 2586-2588.
- M. Ounsy, S. Pierre-Joseph Zephir, G. Viguier, and E. De Ley, “Using an Expert System for Accelerators Tuning and Automation of Operating Failure Checks”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOCB04, pp. 1434-1437.
- V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
- S. Rodriguez Esparza et al., “Mechanical Design and Evaluation of the MP-11-like Wire Scanner Prototype”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR083, pp. 984-986.
- W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 231.
- T. Matsumoto, Y. Hamada, and Y. Furukawa, “MADOCA II Data Collection Framework for SPring-8”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 39-44.
- B. P. Xiao et al., “Crosstalk Effect in the LEReC Booster Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 47-49.
- G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
- M. Pezzetti, B. Bradu, P. Gayet, and J. Vasseur, “Helium Cryoplant Off-line Commissioning and Operator Training: Two Applications of the PROCOS Simulation System at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP059, pp. 513-515.
- S. M. H. Alsari, M. Aslaninejad, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “RF Delivery System for FETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3902-3904.
Back to search